Software :: Sendmail: Will Not Authorize Any Users For Outgoing Mail
Nov 19, 2010
I'm going crazy with this one. For whatever reason, sendmail will not authorize any users. I've tried multiple logins (all with good credentials) but still get login fail, ie (FYI this is a sendmail/MailScanner setup if it makes any difference):
220 hostname.net ESMTP Sendmail 8.13.8/8.13.8; Fri, 19 Nov 2010 12:07:08 -0600
ehlo hostname.net
250-hostname.net Hello testdomain.com [123.123.123.123], pleased to meet you
I want to know is it possible in Sendmail to restrict some users from sending / receiving mail to / from outside world i.e. they should be able to send and receive mails only from local domain.
I would like to set disclaimer like content in my meral mail server, so that all the users should be able to get that content automatically in their outgoing mails.
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
# # /etc/ssmtp.conf -- a config file for sSMTP sendmail. #
How could we bcc all outgoing / incoming email through my Sendmail (8.14) Server? I tried this /etc/procmailrc :0c ! backupmail@domain.com But this get looped and backupmail received multiple emails of each for domain.com while sending locally from one user to another user.
I have sendmail installed in my home machine and also dns is configured and also I have configured mx for mail server. My dns is unregistered and my question is that can I send mail to external account like yahoo or gmail to check whether my is working or not.
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
I'm using Debian 5.0.4 with shell access only, exim4 and mutt. I would like 'all' outgoing mail sent by any/all users to be auto'ed CC (not BCC) to a specified e-mail account for auditing purposes. I do have it working for BCC using 'unseen', but I really want it be CC. I have spent hours of searching/reading/testing and have not been able to find out how. I have seen it done on other shells I've been on as a user; any mail that I sent out, I did not see it was being CC'd but once the recipient received it was also addressed 'toaddr@thatshell.com').
It's not practical to add an alias for every user on the system (/etc/aliases) and to remember to do so each time adding a user. If I set in etc/profile alias mail= mail toaddr Users can still find ways around that.
I have a small home network running mail agents Evolution and Thunderbird, and connected to the internet via Comcast. Originally I used my campus office computer as a mail server, but encountered problmes because Comcast started blocking port 25, allegedly because of span problems. I need to change the setup on my campus office computer so it uses port 587 when functioning as an outgoing mail server.
Can anyone recommend a tutorial which tells me everything to do in order to accomplish that?
At present I'm, using Comcast's outgoing mail server, but I started having problems with sporadic blokage of outgoing mail with attachments, which Comast can't explain.
I created a signature, for my outgoing mail, in Composer Preferences but it don't show when I create a new mail. how to get the signature in my outgoing mail, it would be nice to share.
I m using sendmail-8.13.8-2.el5 along with MailScanner-4.79.11-1
i want to set a rule so that user1@mydomain.com can send only to anotherdomain.com domain. sending mail to any other domain will be rejected. can it be done by sendmail or MailScanner ??
I'm setting up a server and trying to make it *very* secure. Before I configured my web stack, I was about to install some security packages, Tiger and Samhain, but these packages wanted to install sendmail so that they can send outgoing notifications. From the reading I've been doing, I believe I want postfix instead of sendmail. It is my (perhaps mistaken) belief that installing postfix first will prevent them from installing this sendmail I do not want.
I want to install postfix with the following goals in mind:
* let PHP scripts send mail using the mail function.
* various system notification functions (cron, etc.) will be able to send their emails
* emails destined for root@localhost will be redirected to admin@mydomain.com
* let tiger and/or samhain send their notification emails
* NO INCOMING OR LOCAL MAIL IS PERMITTED. Because mail for my domain is handled by google apps, nobody will be checking mail on this server. Also, this server has very limited disk space. It is therefore very important that we don't have mail accumulating in boxes that will never be checked.
* no unnecessary ports, services, or cron jobs are running.
I've been reading a variety of pages that describe postfix setup on Ubuntu but these articles are imprecise, incomplete, and describe installation of things I don't want like POP/IMAP/etc.
There's also one final wrinkle. I will be setting up postfix to send via Amazon SES.
I have installed a sendmail server on fedora 10 I try to configure my sendmail server as a mail server to send outgoing email using port 587( because port 25 is blocked). after finishing configuring my sendmail server, i checked out my sendmail server using telnet localhost 587, and it worked fine as below code...
I have tried two different ways for user name: name, or name@mail.mydomian.com, but not working at all, the two results are the same. PS: I have test port 587 and can use port 587 and Kmail to send outgoing mail using other external relay server
is my wrong configuration for sendmail server or kmail?
I just set up a new router for our home office. I've enabled traffic logging, and I'd like to have the logs emailed to me. However, in order to configure email-notification, the router needs and outgoing mail server. Forgive me, but I don't really understand the terminology being used here. I've googled this a bit, but I'm not sure I now what "outgoing" vs "incoming" mean in the context. I tried using my gmail account as the outgoing mail server (smpt.gmail.com) but it requires TTLS encryption, and there's no option for that on my router.
So I figured I'd setup a simple mail server on my local network. I have a dedicated server machine, so I'd just configure a mail server there. But I got stumped at the first input box (in the yast module):"Outgoing Mail Server".That's what I wanted to use this server for. What is this "outgoing mail server"? I understand it in a normal emai context (I think) but this is confusing me. I've read through the HowTo on the openSUSE wiki, but it still doesn't answer this question.Isn't there some way to have a simple, local mail server (without MX records and the like) so I can send email from a local machine?
I've got a web server that's hosting a few sites, and there are a few WordPress instances with these sites. With Wordpress, whenever a user registers with the site, they receive an email.With my server, it sends mail via Sendmail. This is all fine and good, except no matter what, it's flagged as spam. Is there any way to correct this?Keep in mind that this isn't a mail server, and the only reason the server ever sends mail is for new wordpress users and password resets.
I have setup mail server on Ubuntu 9.10 and it's is working fine.I am using Webmin to addministrate my mail server.My Ubuntu server name abcs.I send a test mail from Wedmin for user gom.Why it keep adding InfoNet. What I would like is setup as gom@abcs.com.
I have a fairly standard Exim setup for inbound and outbound mail. Recently our development team has put together a PHP app that allows us to send out bulk mails to our clients. The PHP app uses standard PEAR libraries to initiate an SMTP connection to localhost (application and mail server are on the same box). The idea here is that the application will send out roughly 10'000 emails in a very short time period (60 seconds or so) which Exim will then hold in its queue for delivery.
The problem comes in where after about 50 emails, Exim stops accepting mail and loggs the following error in the exim_main.log file: SMTP command timeout on connection from localhost [127.0.0.1] Could it be that this is because Exim immediately starts delivering the mail and then stops accepting new incoming connections? I thought that increasing the SMTP limits may be the problem here, but even after setting new values in the exim.conf file to the following, I still get the same problem: queue_run_max = 5000 smtp_accept_max = 5000 smtp_accept_queue = 5000
This begs two questions: How do I resolve this? What is the best way for configuring Exim to accept a huge amount of mail into the queue in a very short time period, but then gradually delivery it once it's all in the queue? I've seen some people run separate Exim daemons for incoming and outgoing mail; is this a good solution?
Im trying to get postfix to filter my outgoing mail and basically drop everything that is not in my hash table.
So far I managed to get this going
Code:
Code:
Unfortunately those rules also apply to incoming messages. My goal is to disallow users on my host to change their "MAIL FROM" to anything they like and restrict them to domains I specify. I'm aware that the local part still is variable and a user of domain "foo.com" could use a email of domain "bar.com", but still some of my troubles would be solved if I get this running.
Working in a SW company. guys transfer their codes through email outside the company. mailserver running on postfix. Is there any method to filter mails according to contents of attachment not by file extension.
As a part of migration I am proposing different scenarios to my organization. One which is asked to prepare is to configure multiple mail servers to handle incoming and outgoing mails. Say I have -[URL], I need to have accept mails from [URL] and send mail from [URL].
I just configured my first postfix mail server today. Everything is working correctly except for the fact that on all outgoing emails instead of the mail format being user@mydomain.biz it says user@hostnameofpostfixserver. I've looked everywhere I can think and I cant see where I'm substituting the host-name of the server for the domain name of my email. Where else could it be?Below is my main.cf. I am running ubuntu 9.10.# See /usr/share/postfix/main.cf.dist for a commented, more complete version# Debian specific: Specifying a file name will cause the first# line of that file to be used as the name. The Debian default
I have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
Can connect to our mail server using telnet onto port 25 and this works correctly, 'ehlo whatever' shows output as expected.
However using a mail client to connect it gives an authentication error and the following appears in the maillog file;
did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
what to look for in the config, this works correctly on our development box but not on our production server. Could it be another program is interfering with the connection?
Sendmail is running in standalone mode not through the xinetd daemon.
I am using the PLAIN AUTH method as to try and avoid getting more errors.
i have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
How to send mail using sendmail on slackware? Can you show me a simple bash program that sends a message to an email? I am new to slackware and I can't send my email using sendmail command. I checked my mail queue on my Webmin and i see this status "access map: lookup [URL]..
I am having Sendmail ver 8.13.1 installed on CentOS 4.5. Recently we have noticed that some emails are not getting delivered to user. Mailserver is receiving emails and they are getting processed but not getting delivered to user.
I have checked mail log and in the log it shows that email has been delivered to user below is log for reference
