I recently built a mail server with Slackware/Sendmail and basically all works. Mail comes in and goes out. The problem I have is 3 email addresses cannot be sent to from this server. The remote ends are 3 different servers but all run Exim 4.69. I have logged the server exchange and this is what I get: (names have been changed to protect the innocent!!)
[Code].....
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedI cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
View 14 Replies View RelatedI am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
I've setup Exim4 as an MTA on my VM which has a static IP. I've pointed the MX records both idential to this static IP. I can send out via command line on the VM using Exim commands and receive the mail in my home account no problem, it also displays the correct from address ie rich@mydomain.co.uk
So I'm not sure what's going on with receiving the mail. If I send a mail from my home email to rich@mydomain.co.uk (not real address), I don't get a bounce or anything, it just goes out never to be seen again.
We moved over from Cpanel using Exim. I was wondering if anyone knew of way to convert the mail so when a user logs in they get to all their mail in their folders. I notice exim has a ton of folders while postfix creates files that act like folders which contain all the emails. I sent up 1 of the emails into the our mail folder that was created by Exim and it can be Subscribed to in Outlook with imap but the emails inside doesn't show up. They both appear as text files so I don't know what the difference is.
View 1 Replies View RelatedI run a mailserver and this is bothering me quite abit. Being going on for about a month now. Running exim4 and dovecot with exim4u. This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
dsghjytyt@yahoo.com
retry time not reached for any host after a long failure period
This is a copy of the message, including all the headers.
Return-path: <andreas@servar.net>
Received: from ip-81-210-201-120.unitymediagroup.de ([81.210.201.120] helo=holly5)
by gwdebian.net with esmtpa (Exim 4.72)
(envelope-from <andreas@servar.net>)
id 1QWpUO-0000yy-ML
for dsghjytyt@yahoo.com; Wed, 15 Jun 2011 14:46:32 +0200
MIME-Version: 1.0
Date: Wed, 15 Jun 2011 14:44:16 +0200
X-Priority: 3 (Normal)
Content-Type: text/plain;
charset="iso-8859-1"
Subject: =?iso-8859-1?Q?lizzie_VIAGRA_=C2=AE_-61%_discount?=
Content-Transfer-Encoding: quoted-printable
From: andreas@servar.net
Reply-To: "RE: Your Recent Job" <Posting>
To: dsghjytyt@yahoo.com
X-Mailer: Microsoft Outlook Express 6.00.2900.2180
Message-ID: <CHILKAT-MID-3b7cf1d5-b3e7-3d78-5c1d-713c0e381cb9@holly5>
X-Antivirus: avast! (VPS 110615-0, 15.06.2011), Outbound message
X-Antivirus-Status: Clean
X-Scanned-By: unscanned primary on gwdebian.net (109.108.198.243); Wed, 15 Jun 2011 14:46:32 +0200
Then alot of random text
I run OSX on my everyday computer so this is not me sending out stuff since the above mail says Microsoft Outlook express has sent it (?) Running a Debian Squeeze server. And I really dont get any other spam due to exim4u setup and spamassasin.
I have a fairly standard Exim setup for inbound and outbound mail. Recently our development team has put together a PHP app that allows us to send out bulk mails to our clients. The PHP app uses standard PEAR libraries to initiate an SMTP connection to localhost (application and mail server are on the same box). The idea here is that the application will send out roughly 10'000 emails in a very short time period (60 seconds or so) which Exim will then hold in its queue for delivery.
The problem comes in where after about 50 emails, Exim stops accepting mail and loggs the following error in the exim_main.log file: SMTP command timeout on connection from localhost [127.0.0.1] Could it be that this is because Exim immediately starts delivering the mail and then stops accepting new incoming connections? I thought that increasing the SMTP limits may be the problem here, but even after setting new values in the exim.conf file to the following, I still get the same problem:
queue_run_max = 5000
smtp_accept_max = 5000
smtp_accept_queue = 5000
This begs two questions: How do I resolve this? What is the best way for configuring Exim to accept a huge amount of mail into the queue in a very short time period, but then gradually delivery it once it's all in the queue? I've seen some people run separate Exim daemons for incoming and outgoing mail; is this a good solution?
I am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex.
domain1.com -> exim
domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
after installing Debian, I typed the command:
Quote:
update-rc.d -f exim4 remove
to avoid automatic start of this mail server (I use qmail). After several months, I did a reboot and exim is started! Looking at the history, I found this command:
Quote: dpkg-reconfigure exim4-config
Maybe this command has restored the init script of exim?
Exim: Is there away to block command when someone telnets to exim's port? Email won't send out unless they authenticate, but if there a way to total block them from typing all together, but still allow the server to receive email? IE, to block this:
[Code]...
I'm in the process of starting a migration from an old postfix server to nice shiney new exim server however there are a few things i'm really not clear on and i'm hoping that some one here could point me in the correct direction. Okay the postfix server at the moment does the follwoing ( i'll try and keep this simple ):
* accepts incoming mail for users on multiple domains and puts the mail in the users mailbox ( external -> internal )
*accepts mail from users on multiple domains to pass on to the outside world ( internal -> external )
Obviously the POP and Imap functions are handled by other daemons.. I'd like to replicate this sort of setup on the new exim box, however the guides i can find only help with configuring the exim system for incoming mails ( external -> internal ) for multiple domains and i cant seem to find a guide that would indicate how to do both ( internal -> external and external -> internal ) on one box. I'm guessing i may have to do some sort of auth to get exim to accept and then handle the internal -> external side of things?
i was asking how to build a CentOS Exim mail server, & gaurantee that all mail messages will be delivered to hotmail inbox ??hotmail said that it will only accept 500 simultanuos connections (=500 messages) to its mail servers from only one IP address, so is there an exim options that i can use to limit messages that sent through the mail server to hotmail to be sent as 500 messages then send another 500 & so on
View 2 Replies View RelatedI'm using CentOS 5 with WHM & exim 4, & when I configured exim to use gmail as an outgoing mail server I got this error:
Code:
2010-10-13 20:20:33 1P64vN-0002h0-7v ** email@domain.com R=send_via_gmail T=gmail_smtp: SMTP error from remote mail server after MAIL FROM: SIZE=5387: host gmail-smtp.l.google.com [**.**.**.**]: 530-5.5.1 Authentication Required.
Learn more at 530 5.5.1 [URL]
Only debian solutions & paths that doesn't exist in my servers.
i have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
How to send mail using sendmail on slackware? Can you show me a simple bash program that sends a message to an email? I am new to slackware and I can't send my email using sendmail command. I checked my mail queue on my Webmin and i see this status "access map: lookup [URL]..
View 9 Replies View RelatedI have questions about mail,
I am using following command on my linux account of my compnay
mail -s 'Hi' username@gmail.com
But I dont receive any emails, where as did not receive any error while executing the above command, so whats going on and what is happening.
what email id do mail use to send the email by default. Is there any way or command to print this by default user id.
I have an application form (it's currently residing at [url] that needs to send an email to me.
I've installed sendmail and enabled it in /etc/php5/apache2/php.ini using the
Code:
When I run mailq, I get errors such as
Code:
Sendmail is flat-out refusing to work on external domains. How the heck can I get this working?
The PHP is below.
Code:
I have sendmail running in system,i want to send mail to other accounts like gmail,yahoo using this sendmail.What should i do ?
View 1 Replies View RelatedWe are using RHEL 4 and sendmail version -8.13.8-2. We are using sendmail service for mail transcation. But we are not able to mail from terminal.Quote:
[systems@localhost ~]$ echo hello|mail -s "Hi dere" systems@localhost
[systems@localhost ~]$ collect: Cannot write ./dfo4M8OIMh014372 (bfcommit, uid=5 14, gid=51): Permission denied
[code]...
I run a CentOS server and would like to put a disclaimer message on every email that is send through that sendmail server.
View 1 Replies View RelatedWe have moved from a Windows based SMTP server to Sendmail on Cent 5.5. We have a special application that was written to look at the "BadMail" folder on the Windows box. I am told by my developers that it is capable of monitor remote locations and they just need to know the format or extension of the badmail files.
My question is what is the default location of the badmail folder in Sendmail? This is a default install from CentOS.
We have a application hosted in our server and it uses send mail for sending and receiving mails.mails can able to reach certain ids but it cant reach some ids. this is the log entry.
Jan 6 00:52:18 p2234270 sendmail[11009]: p046hWi5011897: to=<dinesh@heatstream.com>, ctladdr=<apache@p2234270.pubip.serverbeach.com> (48/48), delay=2+00:08:46, xdelay=00:00:01, mailer=esmtp,
pri=4530999, relay=smtp17.msoutlookonline.net. [64.78.22.100], dsn=4.1.8, stat=Deferred: 450 4.1.8
[code]....
I have sendmail setup on my server but for some reason the following command does not send me an email: echo "test" | mail -s testsubject xyz@gmail.com
however in my crontab i have MAILTO="anemail@anemail.com" and it that is pumping out emails.
I am running this on an AmazonEC2 machine running Fedora Core 8.
I have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain (mydomain.com), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message. For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that does not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example) comming from gmail.
View 3 Replies View Relatedsetup a mail server using sendmail on Redhat 5/Centos 5.
View 3 Replies View RelatedSo I'm having troubles setting up a mail server. First of all, anyone want to try to telnet into <snip> on port 25 and see if it's blocked? I don't think it is, but you never know. How long does it usually take for MX records to get around? I've had this set up for about a day now and still don't see any MX records on any lookup site I go to. I'm currently using slackware 12.2's default sendmail configuration. Should I change anything? I started sendmail on my laptop and got emails going within the LAN but I cannot send emails over WAN (i.e. to/from yahoo or google accounts).e?
View 14 Replies View RelatedI would like to send the logfiles and the CallDetailRecording-files of my Asterisk-server weekly to my email-address.
But I'm having some issues...
This is the command I would use in a script :
I am using CentOS and sending mail through php mail function. It is taking too much time to send a mail.
View 3 Replies View Related