I am trying to configure sendmail to use GMail to send emails. I followed the instructions at[URL]lay-howto.html but it failed.After I was done with these instructions, I think I "cooked" sendmail... Can no longer configure it and it seems that I will have to start from scratch again...How to get sendmail to send emails using Gmail's SMTP server?
View 12 RepliesI have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
I would like to send emails form my server using my gmail account.Does anybody know how to do it?
OS = OPENSUSE 11.3 server installation - NO GUI....
It seems my sendmail (running in slackware 13.0) cannot send out emails correctly. I guess I need to tell it what is the smtp server to use. And, I heard, gmail's smtp server is available to use for this purpose. How to configure my sendmail this way?
View 14 Replies View RelatedI want to send mails via gmail with php. I need to know how to configure main.cf, php.ini, postfix,smtp... and all what is necessary. I tried a lot but no results.
View 5 Replies View RelatedEvolution works fine for receiving mail, but I cant send anything.When i hit "send/receive" itll receive but ask for smtp password every single time. My understanding is that the password is your email password, but it wont accept it.
View 4 Replies View Relatedtrying to setup smtp with gmail to send notification form my forum (phpbb3) actualy nothing work even mailx, does anyone have a tutorial to make this works
View 2 Replies View RelatedMy issue is that i'm trying to send emails with postfix and gmail as the mail relay,i'm trying to send emails to my self by sendmail -bv user@gmail.com
In the logs, i can understand that it been delivered to the destination,
taken from: /var/log/mail.log:
Apr 30 00:05:23 moni postfix/pickup[10490]: 9C7552170C: uid=0 from=<root>
Apr 30 00:05:23 moni postfix/cleanup[10495]: 9C7552170C: message-id=<20110429210523.9C7552170C@moni.localdomain>
Apr 30 00:05:23 moni postfix/qmgr[10491]: 9C7552170C: from=<root@moni.localdomain>, size=283, nrcpt=1 (queue active)
code....
When login in my gmail account i can't see nothing under the sent / inbox / spam folder.
it's seems like the mail are been sent.. but nothing is happening.
I have the 11.4 Gnome Distribution.everything is setup except my email sending.I have never been able to setup evolution correctly with gmail.I have followed the gmail settings of setting the smtp server to be smtp. gmail. com:465 and folowed the instructions here Evolution/FAQ - GNOME Live!to setup smtp.gmail.com with no port change.if there is no port specified the sending message window doesn't report an error it just hangs.
View 9 Replies View RelatedI'm trying to set up my postfix server to relay mail (via a php cms) using Gmail's smtp on my account, but for some reason, Gmail returns an error code that StartTLS must be sent first, my postfix main.cnf file can be found at pastebin, because of this forum's text length I cannot paste my postfix main.cnf file as can be seen I have everything set and configured for Gmail, but postfix (for some unseen reason) can not send StartTLS. [URL].
View 4 Replies View Relatedfor like two weeks I have been trying to send email using evolution for some reason I always get the same Code: Could not connect to smtp.gmail.com: Input/output error
View 6 Replies View RelatedI had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedI am trying to send an email by sendmail (ubuntu) to external servers, but unable to send. following is what i am trying to do and what i got the response:
sendmail -v xxx@hotmail/gmail.com < mail.test
where mail.test contains
[COLOR="rgb(105, 105, 105)"]
From: bla@bla.com
[code]....
I want to forward mail from the evolution mail program (2.22.3.1) to my gmail account.
View 2 Replies View RelatedI am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
can any one please tell me that how to send mail from localhost to gmail or yahoo or some other server,i think it is some mail relay server problem but dont know how to get over it.i am using fedora 13.and i had setup dovecot,sendmail and squirrelmail properly.and configured them. i have no problem to send mail from my local host to me back.my squirrel mail and mutt works fine.bt only problem is that they cant send any mail on other servers.
View 4 Replies View RelatedI have a couple of servers that are scripted to send cron script output logs to my email address (a Gmail address). Mailx is what I am using, but I didn't have to configure anything; I installed it, and it just worked with the following command: mailx -s "SUBJECT" -r FROMMYADDRESS TOMYADDRESS < FILETOCATANDSEND
This occurs every Saturday and Sunday at noon after my backup scripts run.
I noticed yesterday that I did not receive these logs, so I logged into the machine, started 'mail' and saw messages like this: This is the mail system at host media.deagle.lan.
[Code]....
i have centos 5.5 and qmail installed in it this qmail is used for internal mail , we are not send mail from internal to external ids i.e gmail, yahoo etc, this qmail intalled on 192.x.x.x ip server this ip is not live ip but my problem is that from few days mail are sending from internal to external like indiatimes ,yahoo
View 2 Replies View Relatedi have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
How to send mail using sendmail on slackware? Can you show me a simple bash program that sends a message to an email? I am new to slackware and I can't send my email using sendmail command. I checked my mail queue on my Webmin and i see this status "access map: lookup [URL]..
View 9 Replies View RelatedWe host our own mail server on our Fedora box. We would like for our field people using there smart phones to be able to send and receive mail. Receiving is no problem but sending creates problems with relaying and port assignments. Is there any way sendmail can be configured to allow these mobile phone users (AT&T, Verizon) to send mail through our server?
View 1 Replies View RelatedHow to communicate with an SMTP server with telnet, in order to send a mail?
telnet smtp.something.somewhere 53 Trying
10.xxx.xxx.xxx...
Connected to smtp.something.somewhere.
Escape character is '^]'.
And that is as far as I got. What do I have to do after?
What do I have to write after "HELO"?
I have sendmail setup on my server but for some reason the following command does not send me an email: echo "test" | mail -s testsubject xyz@gmail.com
however in my crontab i have MAILTO="anemail@anemail.com" and it that is pumping out emails.
I am running this on an AmazonEC2 machine running Fedora Core 8.
I would like to send the logfiles and the CallDetailRecording-files of my Asterisk-server weekly to my email-address.
But I'm having some issues...
This is the command I would use in a script :
I am attempting to run ssmtp from an initrd image to send an e-mail, via Gmail MTA, upon reboot of the machine. I have already successfully installed and configured ssmtp on the running box (in other words, ssmtp successfully runs after completion of the boot cycle). When attempting to mail something via `echo "Test" | ssmtp username@gmail.com`, I receive the following error message:
[Code]...
i'm using fedora 12 and i wanna send mail using command $mail actually i tried to send mail to my gmail , yahoo ,and hotmail emails but i didn't receive the mail so i expect that i should have some configuration on my host before sending mai
View 2 Replies View RelatedI have configured Sendmail client to send mail to outside network ( Within local domain ), but i am unable to send any mail as i am getting the following error,
[root@cclx10 mail]# cat test |sendmail -v abhilash-o.padmanabhan@hp.com
abhilash-o.padmanabhan@hp.com... Connecting to [127.0.0.1] via relay...
abhilash-o.padmanabhan@hp.com... Deferred: Connection refused by [127.0.0.1]
I have the following configuration in my "/etc/sendmail.cf" file
# SMTP daemon options
O DaemonPortOptions=Port=smtp,Addr=15.146.237.113, Name=MTA
And netstat is showing that sendmail is listening on Port 25 on the IP address which is mentioned.
[root@cclx10 mail]# netstat -an |grep 25
tcp 0 0 15.146.237.113:25831 0.0.0.0:* LISTEN
tcp 0 0 15.146.237.113:25 0.0.0.0:* LISTEN
I'm trying to setup notification function for the Nagios Core which use Mail to send notification.I got an account from Rogers. I have SMTP server, email account with authentication information.My Nagios server is in a workgroup, there is now domain assigned to it, I just use nagiosserver.localdomain in /etc/hosts.I added Rogers SMTP server in /etc/mail/sendmail.mc and Future (AuthInfo) I created an /etc/mail/AuthInfo and add AuthoInfo:smtpserver "U:user" " P: pwd" "M:Plain"I added smtp server in /etc/mail/access for RelayI added root@nagiosserver.localdomain on /etc/mail/virtusertableI regenerated sendmail.cf by user m4 commandrestart sendmail service.When I ran: Mial -s test nagios4ccs@rogers.comIt did not prompt any error message , in the maillog it says the message is queued but It can not be sent out
View 3 Replies View Relatedthe sendmail packages on my f15 server were updated from 8.14.4-20 to 8.14.5-1 yesterday. since then, every attempt to send mail via a smart relay have failed with :
Jun 25 14:05:10 server sendmail[23512]: p5PD59jr023512: from=root, size=208, class=0, nrcpts=1, msgid=<201106251305.p5PD59jr023512@server.{fromdom ain}>, relay=root@localhost
Jun 25 14:05:10 server sendmail[23513]: p5PD5A8l023513: from=<root@server.{fromdomain}>, size=480,
[code]....
i've tried using various different smtp relays and they all now throw the same error. without going through all my sendmail config, i have the following entries in /etc/mail/sendmail.mc :
define(`SMART_HOST', `{smtp server}')dnl
FEATURE(`authinfo', `hash /etc/mail/authinfo')dnl
and the /etc/mail/authinfo file contains :
AuthInfo:{incoming mail server} "U:{user}" "P:{password}"