Networking :: Unable To Send Mail From Server To Outside Using Sendmail?
Jun 1, 2011
I have configured Sendmail client to send mail to outside network ( Within local domain ), but i am unable to send any mail as i am getting the following error,
[root@cclx10 mail]# cat test |sendmail -v abhilash-o.padmanabhan@hp.com
abhilash-o.padmanabhan@hp.com... Connecting to [127.0.0.1] via relay...
abhilash-o.padmanabhan@hp.com... Deferred: Connection refused by [127.0.0.1]
I have the following configuration in my "/etc/sendmail.cf" file
# SMTP daemon options
O DaemonPortOptions=Port=smtp,Addr=15.146.237.113, Name=MTA
And netstat is showing that sendmail is listening on Port 25 on the IP address which is mentioned.
[root@cclx10 mail]# netstat -an |grep 25
tcp 0 0 15.146.237.113:25831 0.0.0.0:* LISTEN
tcp 0 0 15.146.237.113:25 0.0.0.0:* LISTEN
View 1 Replies
ADVERTISEMENT
Jun 21, 2011
I try to configure nagios server in my network. In nagios server I need to configure sendmail rely agent. I configured sendmail like given below
Code:
dnl #DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
define(`SMART_HOST', `mail.mydomain.com')dnl
define(`RELAY_MAILER_ARGS', `TCP $h 25')dnl
define(`ESMTP_MAILER_ARGS', `TCP $h 25')dnl
[code].....
View 1 Replies
View Related
Feb 24, 2010
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
View 4 Replies
View Related
Nov 15, 2010
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies
View Related
Jun 25, 2011
the sendmail packages on my f15 server were updated from 8.14.4-20 to 8.14.5-1 yesterday. since then, every attempt to send mail via a smart relay have failed with :
Jun 25 14:05:10 server sendmail[23512]: p5PD59jr023512: from=root, size=208, class=0, nrcpts=1, msgid=<201106251305.p5PD59jr023512@server.{fromdom ain}>, relay=root@localhost
Jun 25 14:05:10 server sendmail[23513]: p5PD5A8l023513: from=<root@server.{fromdomain}>, size=480,
[code]....
i've tried using various different smtp relays and they all now throw the same error. without going through all my sendmail config, i have the following entries in /etc/mail/sendmail.mc :
define(`SMART_HOST', `{smtp server}')dnl
FEATURE(`authinfo', `hash /etc/mail/authinfo')dnl
and the /etc/mail/authinfo file contains :
AuthInfo:{incoming mail server} "U:{user}" "P:{password}"
View 1 Replies
View Related
Apr 30, 2009
I would like to send the logfiles and the CallDetailRecording-files of my Asterisk-server weekly to my email-address.
But I'm having some issues...
This is the command I would use in a script :
View 5 Replies
View Related
Jan 22, 2011
I'm currently running Ubuntu 10.10 Server using VirtualBox 3.2.12 r68302. I've setup a LAMP Server and Installed Redmine and I'm going to be starting some projects. The problem I have is that I've linked it to a subdomain thru my hosting, so things are a little more complex for me then usual. Here's the software I've added for this setup:
Ruby version 1.8.7 (i686-linux)
RubyGems version 1.3.7
Rack version 1.1
[code]...
how mail server functionality works as well as how to properly set the host of the virtual pc.
View 1 Replies
View Related
Oct 21, 2009
How to restrict some uses to send mail to outside domains except local in sendmail.I am using ( CentOS5 + Sendmail )
View 2 Replies
View Related
Aug 3, 2010
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
View 1 Replies
View Related
Jul 13, 2010
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
View 2 Replies
View Related
Mar 30, 2011
i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
View 1 Replies
View Related
Jun 30, 2011
I am trying to send an email by sendmail (ubuntu) to external servers, but unable to send. following is what i am trying to do and what i got the response:
sendmail -v xxx@hotmail/gmail.com < mail.test
where mail.test contains
[COLOR="rgb(105, 105, 105)"]
From: bla@bla.com
[code]....
View 2 Replies
View Related
Jan 13, 2010
i have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
View 2 Replies
View Related
Apr 5, 2011
How to send mail using sendmail on slackware? Can you show me a simple bash program that sends a message to an email? I am new to slackware and I can't send my email using sendmail command. I checked my mail queue on my Webmin and i see this status "access map: lookup [URL]..
View 9 Replies
View Related
Jun 10, 2010
I have recently installed the ISPCP web hosting control panel. It seems that after a while running and testing I can receive but I cannot send e-mail. basically I get an error which goes
Code:
postfix/smtp[5939]: connect to alt1.gmail-smtp-in.l.google.com[72.14.213.27]:25: Connection timed out
I have, in the recent past, been able to send e-mail so I know that there is something that has gone wrong with my configuration, which I cannot. I post here my master.cf and my main.cf files as well as the mail.log file and the mail.warn....
Ubuntu Server 8.04 LTS 64x
spCP 1.0.4 OMEGA
build: 20100228
Codename: Priamos
View 2 Replies
View Related
Mar 17, 2010
I have sendmail setup on my server but for some reason the following command does not send me an email: echo "test" | mail -s testsubject xyz@gmail.com
however in my crontab i have MAILTO="anemail@anemail.com" and it that is pumping out emails.
I am running this on an AmazonEC2 machine running Fedora Core 8.
View 1 Replies
View Related
Apr 11, 2011
I am trying to configure sendmail to use GMail to send emails. I followed the instructions at[URL]lay-howto.html but it failed.After I was done with these instructions, I think I "cooked" sendmail... Can no longer configure it and it seems that I will have to start from scratch again...How to get sendmail to send emails using Gmail's SMTP server?
View 12 Replies
View Related
Aug 11, 2011
I'm trying to setup notification function for the Nagios Core which use Mail to send notification.I got an account from Rogers. I have SMTP server, email account with authentication information.My Nagios server is in a workgroup, there is now domain assigned to it, I just use nagiosserver.localdomain in /etc/hosts.I added Rogers SMTP server in /etc/mail/sendmail.mc and Future (AuthInfo) I created an /etc/mail/AuthInfo and add AuthoInfo:smtpserver "U:user" " P: pwd" "M:Plain"I added smtp server in /etc/mail/access for RelayI added root@nagiosserver.localdomain on /etc/mail/virtusertableI regenerated sendmail.cf by user m4 commandrestart sendmail service.When I ran: Mial -s test nagios4ccs@rogers.comIt did not prompt any error message , in the maillog it says the message is queued but It can not be sent out
View 3 Replies
View Related
Jul 13, 2011
We are using postfix for relaying our internal system generated mail to other domain through google apps. All client servers able to send mail through the postfix server, only user of local postfix server(root, etc) unable to send mail with command like mutt, mail.My detail configuration given below:
Code:
postconf -n
output
Code:
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
[code]....
View 8 Replies
View Related
Sep 1, 2010
i have install and configure the qmail server in centos 5.4 and its working fine. i have created the domain (ex - abc.com)in qmail server and also create the user and its working fine. but i am not able to send the mail which user not found in qmail(abc.com) server, which are created on the web (at isp side or pop user)
View 1 Replies
View Related
Nov 23, 2010
I have a really weird (but consistent) problem with my Kubuntu 10.10 install: I cannot post some HTTP forms.
First off, this is a client PC problem. My squirrelmail on the server works fine. I just use squirrelmail 1.4.17 to troubleshoot the ubuntu desktop problem
I used an old (07.04) Ubuntu install which worked fine. Then I wiped the disk and installed Kubuntu 10.10 on the same hardware. Everything works but **some** HTTP post does not work (I can log in but not send mail or save draft). I noticed I cannot log in to Yahoo, for example.
My webhosting account can display the apache access_log. When I hit the <Send> button the POST request never arrives to the web server.
I use a router (Dlink DL-604) behind a DSL modem and ooma box. There is a Windows 7 PC and a Kubuntu PC connected to the router. I can use squirrelmail just fine from the Windows PC.
I tried several steps:
- reinstalled Kubuntu
- installed Firefox and Chromium (on top of reconq)
- ran from a CD on my other (Windows 7) PC
- installed Wireshark and compared the traffic (but was unable to pinpoint a problem)
The result was the same: the <Send> button just keeps waiting; the POST request never makes it to the web server.
This sounds (and is) scary and suspect. The fact that the "demo" Kubuntu install (from the CD on my other Windows PC) using the reconq exhibits the same problem on a totally different hardware leads me to believe this may be related to Kubuntu. For example, I had to type this very message on the Windows PC as I could not post it on the forum from my Kubuntu box.
View 2 Replies
View Related
Jul 30, 2011
I am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
View 1 Replies
View Related
Apr 8, 2010
How long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies
View Related
Feb 22, 2011
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies
View Related
Mar 4, 2011
I'm trying to configure postfix so smart daemon can send out notifications emails. My system will need to send emails to a mail server that is on the same local network. I have not had much luck in getting this to work, and am confused on what I need to setup to do this and how to set it up. Does my system need to be apart of the same domain as the mail server? If so, how do I do this? Is there any restrictions sending emails from the command line as the root user? Do I need to configure a relayhost?
Basically all I need to do is send emails to a local mail server, i.e. a mail server on the same local network. I do not need to receive emails. I am rather clueless as to how to set this all up, and what I need for this basic email functionality. I have read and tried many postfix configuration tutorials, but when I try to send out a test email to a email address on the local network mail server I always get "Connection refused" to the server and deferred or bounced status on my test email.
View 2 Replies
View Related
Jun 1, 2011
I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
View 2 Replies
View Related
Feb 15, 2010
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies
View Related
Jun 8, 2011
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies
View Related
Nov 19, 2010
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
View 9 Replies
View Related
Dec 1, 2010
I'm an Oracle DBA and started working for my current employer about 4 months ago. This past weekend an alert re: FS space brought my attention to /var/spool/clientmqueue (full of mail re: cron jobs) and the fact that sendmail is not running on our Linux servers.I'm told that the IT security team deemed sendmail too vulnerable so we don't run it.Aside from FS filling up and missing notification of issues with crontab entries, I'm concerned that we may be missing notification of potential issues. In other Unix/Linux environments I've seen emails from the print daemon when it experienced problems with specific jobs.
Are there other Linux facilities aside from cron and lpd that use email to advise the users of possible issues? Are there ways to secure sendmail or secure alternatives to sendmail? My primary need/desire is to make sure that emails regarding issues on the server get to the appropriate users. Secondary goal would be to have the ability to use mailx to send mail out. There is No need/desire to receive mail from outside.
View 1 Replies
View Related
