General :: Unable To Insert The Driver Module
Jun 18, 2010I am viswanath. i want to know how to insert a driver module in Linux fedora 2.6.while using insmod <driver name> it showing an error. shall i install any plugins.
View 2 Replies
ADVERTISEMENT
General :: Getting Error "invalid Module Format" And "insert Kernel Module" / What Is This?
Feb 22, 2010What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedGeneral :: Adding A New Kernel Module To Wireless Driver Module?
Apr 22, 2010I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedNetworking :: Insert Module In System Run On AT91SAM9261EK?
Mar 7, 2011When I tried to insert module in my linux system run on AT91SAM9261EK , I've got something like :
[Code]...
I suspect I have missed some kernel settings when I compiled my kernel so that the kernel cannot recognize those functions ..
Programming :: Insert Kernel Module Into Menuconfig
Jan 14, 2011I am looking for information to insert kernel module into kernel. I am not looking at dynamically insert of kernel module using insmod, modprobe etc. I am looking for statically insertion of kernel module procedure, such as what to change on makefile, what to change on menuconfig, what to change on .config file, etc.
View 2 Replies View RelatedUbuntu :: Load Module On Usb Dongle Insert?
Nov 12, 2010I have a problem with a wireless mouse on my laptop running Ubuntu 10.10. If thw receiver is plugged during boot, it works out of the box. But if I plug it in afterwards, I have to manually do
Code:
sudo modprobe usbhid
for it to start workin.
My question is how to automatically load a module when a usb device with a given id is inserted?
Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?
Jun 1, 2009When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
General :: Unable To Use Shift + Insert To Paste And Copy Using Text Selection?
Mar 9, 2010know what can be done to enable the "select text to copy" and "shift+insert to paste" features in linux.
View 2 Replies View RelatedGeneral :: Find The Driver Module Name Using MAJOR NUMBER?
Aug 16, 2010how to find the driver module name using MAJOR NUMBER. In general major number list is available in Documentation/devices.txt but if i want to find out the driver module name specific for a given MAJOR NUMBER, what can be done?
View 2 Replies View RelatedHardware :: USB Generic Serial Driver, And FTDI Single Port Driver As A Module, But It Still Isn't Getting Recognized?
Feb 4, 2011My gentoo laptop doesn't have a serial port, so I got a usb-serial (RS-232) adapter from ebay. However when I plug it in, the only thing dmesg mentiones is: Code:usb 5-1: new full speed USB device using uhci_hcd and address 2I've tried to look for a kernel driver in "make menuconfig" by pressing "/" and typing 232. Nothing about RS-232. Device Drivers -> Character drivers -> Serial drivers has 8250 and UART as a module. Device Drivers -> USB support -> USB serial converter support has in-kernel: USB generic serial driver, and FTDI Single port driver as a module, but it still isn't getting recognized.Is there some module i forgot to enable, or do i have to download a separate module from somewhere?
View 5 Replies View RelatedCentOS 5 Networking :: Macbook Pro 5,5 - Late 2008 - Wireless - Download The Broadcom Driver And Create A Driver Module
Feb 20, 2010I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
General :: Unable To Mount A Pendrive - Message - Module Usb-ohci Not Found
Sep 30, 2010I need to use a pendrive with the Slackware 13.0 and I've tried a lot of things I've found at the internet but unfortunately they didn't work. It's not possible to use graphical interface because some reasons. So the problem need to be solved by command line.
When I use "lsusb" command, I can see the pendrive.
However, when I try these:
I got the following message: "Module usb-ohci not found" and "Module usbcore not found"
How can I deal with these problem? Because I guess without these module loaded it's not possible to mount the pendrive. Is it right?
Ubuntu Installation :: Error - Unable To Login Into Any Of The OS Until And Unless Insert Portable Drive
Sep 28, 2010One of my friends has installed ubuntu a day ago,when he installed it his portable hard-drive was attached to the PC .He is not sure whether he has installed ubuntu on portable drive or not,but now he not able to login into any of the OS on his machine until and unless he insert his portable drive,what could be the reason and what is the solution(his regular harddrive contains XP)
View 7 Replies View RelatedSoftware :: Cannot Compile A Driver Module
Jan 22, 2011i'm trying to compile a driver module on ubuntu 10.10 . initially i was getting a lot of include file errors. but then when i added the include path. but after doing that i was getting a series of errors which i have no idea how to solve and it wont fit in one page. i've followed the same way how it is given in the tutorials online but still i'm not able to get it done. Is there any simple method to do this? is there something that i shouldn't do.
View 9 Replies View RelatedGeneral :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27
Jan 30, 2011I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
Debian :: Cannot Get Kernal Module To Load The Driver For My NIC
Aug 17, 2010I am installed Debian 5.0.5 with kernel 2.6.x.
I do a lspci and get: Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Kernel modules: e1000e
I know under this im supposed to see: Kernel driver in use: e1000e <- but this doesn't exist.
So, under lsmod I see e1000e loaded:
Debian :: Blacklisting A I915 Driver (module)?
May 11, 2011I have really problems with i915 driver (module) and my graphic card on squeeze with gnome.There is a BUG and there is no any solution at the moment:[URL]So I'd like to disable i915 driver from the startup and load i810 module instead:
Code:
# modprobe i810
# modprobe i910
#
BTW I've tried to create /etc/X11/xorg.conf file with i810 module for the video card, but it doesn't work, i915 will be loaded.
Code:
Section "Device"
Identifier"i810"
Driver"i810"
EndSection
Is it any other way to blacklist i915 completely from the startup, for example in /etc/modprobe.d/blacklist.conf?
Software :: Using Modprobe To Install A Driver Module?
Jun 21, 2011I may be missing a last crucial step while trying to use modprobe to install a module and make it active.The system is Debian (Mint LMDE flavor).The module is for a Realtek wlan driver. Since it appears to be available in the kernel, I chose to try and use it instead of getting into a work-around using ndiswrapper.Here is how I found it..
Code:
# modprobe -l | grep r81
kernel/drivers/net/r8169.ko
[code]...
Slackware :: 2 Ethernet Cards Using The Same Driver As Module?
Oct 11, 2009i have 2 nic's that use the same 8139too module to be operated.so in order to run them i added in /etc/modprobe.d/a file with 2 aliases for the 2 nics alias eth0 8139too alias eth1 8139too and I added a udev rule to give the name eth1 to the 2nd card (the 1st card already had a rule) i still don't get the 2nd rule to be brought up automatically at start up... ifconfig only returns 'eth0' and i have to manually do 'ifconfig eth1 up' at which time the interface is brought up nicely.. then i do a dchpcd to get a network address and im all set. but i would like to do this automatically... note that i know that if i add static ips in /etc/rc.d/rc.inet1.conf i will get both ifs up... but i wonder how its gonna happen with the 2nics being 2 dhcp clients.
View 5 Replies View RelatedUbuntu Networking :: Wireless And Lan Driver Kernel Module?
May 1, 2010what is name of modules in kernel for wireless and lan driver ?
View 1 Replies View RelatedUbuntu :: RR1740 Driver Module Compilation Error?
Nov 3, 2010running the latest ubuntu 10.10 desktop i386i followed this guide for reference when building the updated driversall paths and references have been updated to reflect my version of the driveroriginal error during compilation:
DKMS make.log for rr174x-2.4 for kernel 2.6.35-22-generic (i686)
Wed Nov 3 01:28:03 EDT 2010
make: Entering directory `/usr/src/linux-headers-2.6.35-22-generic'
[code]....
Programming :: Detect Which Module/driver A Network Interface Use?
Dec 28, 2010In C++ or C, is there anyway to detect the name of the module or driver currently used by a network interface card (either wired or wireless, INCLUDING USB DEVICES)?My application must have this feature. I just want to detect whether the module / driver is ndiswrapper or not.
View 4 Replies View RelatedDebian Configuration :: Identify And Disable A Printer Driver / Module?
Mar 2, 2011I have a printer connected locally to my Debian box. It runs fine via cupsd.I am also running a Windows 2003 VMware guest which I would like to use the printer (use as a local printer, not a network printer).
VMware offers a connection via USB, so it should work. The printer I have plugged locally into the Debian host is recognised by the Windows 2003 guest, but it won't print. I get an error message saying that the printer is still connected to the host OS, and that I need to remove (or presumably disable) the host driver before the guest can use the printer.
So how can I find out which printer driver/module is being used by the Debian host to connect to this printer? And what is the best way to temporarily disable it, while my VMware guest is running?
OpenSUSE Hardware :: No More Ov51x-jpeg Webcam Module/driver In 11.1?
Jan 22, 2009ov51x-jpeg rpm was available for opensuse 11.0 and previous versions. I fail to find it for 11.1. My webcam requires it (IIRC it is a creative webcam ... if anybody requires details I can pull it out of my basement).I am comfortable with command-line, however I would prefer not to compile the source code (I am not familiar with compiling kernel modules )
View 19 Replies View RelatedUbuntu Multimedia :: Remove Video Driver Module For VESA
Sep 16, 2010I'm trying to remove 3Dlabs / Oxygen gmx , and install vesa - Generic VESA-compliant video driver module.How do I remove 3Dlabs / Oxygen gmx ?I can click on VESA in the 'Choose By Name...' , but when I close that box, it shows No Driver.
View 4 Replies View RelatedUbuntu Networking :: Download The Proper Driver For Wifi Module?
May 22, 2011where can I download the proper driver for my wifi module : Ralink RT3090 ?
Ubuntu 10.04 propose the rt3090sta which is no good
CentOS 5 Hardware :: Uninstall Nvidida Graphics Driver Module?
May 20, 2010I'm trying to compile a correct driver module for my graphics adapter "Nvidia Riva TNT2 M64". I visited the website "http://www.nvidia.com/object/linux_display_archive.html" and I downloaded the file "NVIDIA-Linux-x86-71.86.13-pkg1.run".to start installation I used the following commands:/sbin/init 3 --> to close the X rversh ~/NVIDIA-Linux-x86-71.86.13-pkg1.run
View 10 Replies View RelatedCentOS 5 Networking :: Find Out Which Package (rpm) Contains The Ipg (network Driver) Module?
Mar 22, 2011How do I find out which package (rpm) contains the ipg (network driver) module?
View 1 Replies View RelatedOpenSUSE Multimedia :: Realtek RTL2831 USB Digital-TV Key - Compiling Driver Module?
Sep 12, 2011I am running openSUSE 11.1 with modified Kernel. While trying to run make on the downloaded driver for the RTL2831 I am getting an error message that I do not full understand. That is:
Code:
linux-2c5j:~/rtl2831-r2 # make
make -C /root/rtl2831-r2/v4l
make[1]: Entering directory `/root/rtl2831-r2/v4l'
No version yet, using 3.0.4-41-desktop
[code]...
I am not sure what is required when the error is "first use this function". How can I use the function T_DIGITAL_TV if I first have to install my driver in order to use the stick?
Hardware :: Cannot Install Intel 82577 Driver With Makefile Module.symvers Or Both
Nov 8, 2010not entirely sure if this is a hardware or a kernel/distro issue but here goes: when trying to install the driver for an Intel e100 (82557) NIC (on an IBM Thinkpad A20m) I get the following from both <make> and <make install>....
make -C /lib/modules/2.6.30.9/build SUBDIRS=/root/e100-3.5.17/src modules
make[1]: Entering directory /usr/src/linux-source-2.6.30.9
WARNING: Symbol version dump /usr/src/linux-source-2.6.30.9/Module.symvers is missing: modules will have no dependencies and modversions.scripts/Makefile.build:49 *** CFLAGS was changed in "/root/e100-3.5.17/src/Makefile". Fix it to use EXTRA CFLAGS. Stop.
[Code]...