Ubuntu :: Load Module On Usb Dongle Insert?

Nov 12, 2010

I have a problem with a wireless mouse on my laptop running Ubuntu 10.10. If thw receiver is plugged during boot, it works out of the box. But if I plug it in afterwards, I have to manually do

Code:
sudo modprobe usbhid
for it to start workin.

My question is how to automatically load a module when a usb device with a given id is inserted?

View 4 Replies


ADVERTISEMENT

Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?

Jun 1, 2009

When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:

[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists

[code]...

Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.

Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.

View 3 Replies View Related

General :: Getting Error "invalid Module Format" And "insert Kernel Module" / What Is This?

Feb 22, 2010

What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?

View 8 Replies View Related

Networking :: Insert Module In System Run On AT91SAM9261EK?

Mar 7, 2011

When I tried to insert module in my linux system run on AT91SAM9261EK , I've got something like :

[Code]...

I suspect I have missed some kernel settings when I compiled my kernel so that the kernel cannot recognize those functions ..

View 2 Replies View Related

General :: Unable To Insert The Driver Module

Jun 18, 2010

I am viswanath. i want to know how to insert a driver module in Linux fedora 2.6.while using insmod <driver name> it showing an error. shall i install any plugins.

View 2 Replies View Related

Programming :: Insert Kernel Module Into Menuconfig

Jan 14, 2011

I am looking for information to insert kernel module into kernel. I am not looking at dynamically insert of kernel module using insmod, modprobe etc. I am looking for statically insertion of kernel module procedure, such as what to change on makefile, what to change on menuconfig, what to change on .config file, etc.

View 2 Replies View Related

Hardware :: Install Kernel Module For New Usb Wifi Dongle?

Apr 13, 2011

I:m trying to install the module RTL819CU onto my kernel so that I can use my wifi usb dongle. When I try to install it I get a make error 2.

[code].....

View 2 Replies View Related

Programming :: Load Fortran Module For Matio Libraries Using Gfortran - Can't Open Module File 'matio.mod' For Reading

Jun 27, 2010

I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1

Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?

View 1 Replies View Related

General :: Failed To Load "canberra-gtk-module": Libcanberra-gtk-module No Such File Or Directory

Mar 25, 2011

i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said

failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.

View 5 Replies View Related

OpenSUSE Install :: Failed To Load Module "fglrx" (module Does Not Exist, 0)

May 8, 2011

I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:

Failed to load module "fglrx" (module does not exist, 0)

I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?

View 5 Replies View Related

General :: (EE) Failed To Load Module "vmwgfx" (module Does Not Exist, 0)

Jun 23, 2011

I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:

(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"

[code]...

View 2 Replies View Related

Fedora :: Gtk Message - Failed To Load Module "'pk-gtk-module"

Aug 17, 2011

When opening gedit as a user I get the following message

Gkt-message: Failed to load module "'pk-gtk-module"

If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt

This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.

How to clean this up so the messages do no appear?

View 4 Replies View Related

OpenSUSE Install :: GUI Will Not Load - Insert System Disk And Press Enter

Jan 7, 2011

Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.

View 3 Replies View Related

OpenSUSE :: "canberra-gtk-module" Error Failed To Load Module "canberra-gtk-module"

Jan 28, 2010

OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!

now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more

View 3 Replies View Related

Ubuntu :: Not Able To Load Fb Module / Fix It?

Jun 10, 2011

This morning I came into my office and turned my computer on, per usual, but found that after about 10 minutes of waiting, I was still only getting the blinking cursor of waiting.

Since Ctr-Alt-Del did nothing, I held the power button down on the computer, and started again. This time I entered GRUB and chose the recovery mode, hoping for a fix disc option or some such.

However, what I was faced with was an ATA error that pointed to hard drive errors. (I can't remember what the exact error was now) So I pulled out my 10.10 install cd and booted into that.

I ran the fsck command until it returned no more errors, and rebooted. I waited for the login screen to come up, and was dismayed when it did - only command line style.

So I logged in and ran startx hoping to at least get something to show up on my screen, when it failed and gave me these errors code...

I was disappointed.

I won't bore you with the tales of my googling exploits and all the other things I've tried so far because the list would get extensive. So I ask you: Any ideas?

View 7 Replies View Related

Fedora :: Error "Failed To Load Module "nvidia" (module-specific Error,0) No Drivers Available

May 1, 2011

I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.

View 5 Replies View Related

Ubuntu :: Load Scsi_mod Kernel Module?

Sep 2, 2010

xubuntu 9.10 I have a Drobo, sort of RAID storage device. It makes use of volumes of 2TB. Only the first volume (LUN) is shown up. According this information;[URL]... that happens if the scsi_mod kernel module is not loaded.

View 1 Replies View Related

Ubuntu :: Uinput Module Won't Load In 10.10 Maverick?

Nov 9, 2010

I just upgraded my lenovo T61p to ubuntu 10.10 maverick. I use the thinkfinger package to use my fingerprint reader for sudo/login/screen unlocking. This has worked perfectly in previous ubuntu releases, but I can only get it to work for login, not sudo or locked screen.I think the problem has to do with uinput not loading. I have it in /etc/modules, but it still doesn't show up (I also manually load it with modprobe and it won't work):

Code:
kevin@milner:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.

[code]....

View 9 Replies View Related

Ubuntu :: Failed To Load NVIDIA Kernel Module?

May 11, 2010

My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:

(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration

I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).

Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.

I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.

Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.

Here's my xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"

[Code].....

View 9 Replies View Related

Ubuntu Multimedia :: Nvidia Module Won't Load / Make It Possible?

Jul 23, 2010

This nvidia driver is driving me nuts... I have tried everything I can think of including multiple solutions from threads.

I have a GeForce FX5200 with the nvidia-current drivers installed. On boot I receive the following error messages... code...

If I try and open the nvidia server settings I get the following message.

You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.

In Jockey I get:

The driver is activated but not currently in use.

I am using headers 2.6.32-23 and have updated to grub2 (something that seems to have fixed a mismatched header issue for others). I have uninstalled and reinstalled drivers, edited the xorg.conf with nvidia-xconfig as well as manually and I don't know what else to do... any suggestions would be appreciated... 640x480 is crap.

View 2 Replies View Related

Ubuntu :: 10.04 - Failed To Load NVidia Kernel Module

Aug 8, 2010

My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got

Code:
Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'

Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.

View 1 Replies View Related

Ubuntu :: 10.10 - Failed To Load NVidia Kernel Module

Feb 4, 2011

I am trying to fix my friends laptop and after the most recent upgrade she performed she got this error message when her laptop boots. Thing is that it stays frozen in that mode. I don't even see the grub boot loader. I know its the only operating system she has running on her laptop as well. The following error was encountered. You may need to update your configuration to solve this.

(EE) NVIDIA: failed to load the NVIDIA Kernel module.
please check your
(EE) NVIDIA: system's kernal log for additional error messages.
(EE) failed to load module "nvidia" (module-specific error, 0)
(EE) no drivers available
She is running ubuntu 10.10

View 5 Replies View Related

Ubuntu Installation :: Grub Rescuce - Cannot Load Module

Jul 1, 2011

This is my fourth variant of trying to get Ubuntu installed and i have lost how mant different steps of troubleshooting I have done.

I could attach a long list of specs but will wait for someone to request what thewy need. At the Livecd Enviroment ATM

I have gone back to a basic partion layout because i thought Raid1 > LVM may be causing issues.

Now installing on a single 750GB Drive:
Partioned
4GB - Swap
50GB /
rest /home

Every install drops me at the grub rescue> prompt.

I can boot the livcd I installed from no problem.

Grub rescue troubles:

I can ls and find the partions of the drive lablled

(hd0,msdos3) - home partion
(hd0,msdos2) - root partion
(hd0,msdos1) - swap area

ls (hd0,msdos2)/boot/grub - Lists the .mod's and both Linux and normal are there.

Issue comands:

set prefix=(hd0,msdos2)/boot/grub set root=(hd0,msdos2)

insmod normal Error 'Invalid object type'

insmod linux Error 'Invalid object type'

Tried to point via full path

insmod (hd0,msdos2)/boot/grub/normal.mod [I]ALSO [/I ]linux.mod

Brings back the same error. Error 'Invalid object type'

Tried to load from /usr/lib/grub/i386-pc

Again! gives the same error.

View 3 Replies View Related

Debian :: Nvidia Module Sometimes Won't Load

Jul 25, 2010

I'm fairly new to Debian, but during the past I've used Mandrake, Slackware and Ubuntu. Few months ago I've migrated from Ubuntu to Debian - I like it a lot but there is one thing which keeps bugging me.Sometimes - one of the few boots - nvidia module won't load and GDM won't start. During the "bad" boot system freezes for a while after the message "PME# disabled" and gives the message about nvidia GPU not supported. Because of that GDM fails to start.Below are the boot logs (without the leading time for easy diff comparison) - the "bad log" when nvidia fails to load and the "good log" when everything is OK. Any help?

View 14 Replies View Related

Fedora :: Way To Load Module On Startup?

Jul 12, 2011

I rebooted my computer and noticed the aoe module didn't loadad to do a modprobe aoe)What's the proper way to have this start at boot time? (rather than something like doing a modprobe aoe in the rc.local

View 1 Replies View Related

Red Hat / Fedora :: Load / Unload Module?

Apr 12, 2010

how to loads & unload module.why its important?

View 3 Replies View Related

Ubuntu Multimedia :: VLC No Longer Working After Update - Cannot Load Module

May 15, 2010

Since my latest update to Ubuntu Lucid, VLC is no longer working. When starting VLC, I get an impractical dark interface that doesn't response to any command.
vlc -v gives this output:

Code:
VLC media player 1.0.6 Goldeneye
[0x9d7f668] main libvlc warning: cannot load module `/usr/lib/vlc/gui/libqt4_plugin.so' (/usr/lib/vlc/gui/libqt4_plugin.so: undefined symbol: _ZN9QListData7append2ERKS_)
[0x9e2e6d0] main demux warning: no access_demux module matching "file" could be loaded
[0x9d7f668] main libvlc: Start vlc met standaardinterface. Gebruik 'cvlc' om vlc zonder interface te gebruiken.
[0x9e5bfa0] main generic error: no dialogs provider module matched "any"
[0xb7400e48] skins2 interface error: no suitable dialogs provider found (hint: compile the qt4 plugin, and make sure it is loaded properly)
[0xb7400e48] skins2 interface: skin: subX author: Martin Poehlmann
[0xb7400e48] skins2 interface warning: non-unique id: time
[0xb7400e48] skins2 interface warning: non-unique id: songticker
[0xb7400e48] skins2 interface warning: non-unique id: main.normal.dbuttons.info
[0xb7400e48] skins2 interface warning: non-unique id: eq.onoff.lef
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.menu
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.clos

It looks like a Qt4 problem, I have installed Qt4 with all possible dependencies, re-installed vlc several times but no effect! cvlc as proposed doesn't react.

View 4 Replies View Related

Ubuntu :: ERROR: Unable To Load The Kernel Module Nvidia.ko

May 16, 2010

for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).

so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:

Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:

Quote: sudo nano /etc/modprobe.d/blacklist.conf

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv

[Code]...

View 5 Replies View Related

Ubuntu Networking :: Rt2860 Kismet Power Always Says 0 How To Load Module?

Jun 26, 2010

I have a WS- something or other by gigabyte, it has the "ralink rt2860" chipset according to lspci.

It works well the only problem is in kismet or airodump-ng the power always shows as 0.

In the kismet.conf i had to set the source to rt2500, it does not seem to like rt2860 or rt2x00.

In airodump-ng it always says "chipset: ralink 2560pci" and "driver:rt2500"

Is there any way i can use the rt2x00 drivers, would they allow for more things ?

Whats funny is that network manager can see the signal strenght of all the sources.

View 2 Replies View Related

Ubuntu Multimedia :: Module Nvidia Failed To Load With Kernel 2.6.32-33

Jun 7, 2011

I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved