I have Backtrack4r2, and it did not detect my wireless card which is Intelpro 2200. I installed Windows wireless driver, after i installed the regular driver using wine, but it did not work.
module is not detected by linux No wireless extension. how can I install rhe driver where the card is not detected.
I am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
I am running Ubuntu 9.1 on my Gateway M305CRV and love it . . HOWEVER:Less I am plugged directly into the internet with Ethernet cable . . I have not internet. I purchased this laptop just prior to when internal wireless cards/ modems were standard . . thus I have an external Dell brand (True Mobile 1300-802.11 b/g PC Card) wireless card.Ubuntu does not seem to automatically detect it and I dont see
View 2 Replies View RelatedWhile installing my redhat distro in VMware 6, its giving an error message that ethernet will be disconnected.
View 1 Replies View RelatedI need an .inf and I don't have the software that came with the pc for the wireless driver. I already installed ndiswrapper.
What can I do next does someone have the .inf file I need ?
I recently formatted an old Dell D600 and installed 9.10 on a single partition. It connects to my Airport just fine hardwired, but I have had no success getting the IntelPro/Wireless 2200BG card to talk wireless. I've entered the SSID and WPA2 security ID with no success.
View 2 Replies View RelatedHow, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies View RelatedI just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
[Code].....
I have a Toshiba Satellite L550 laptop with Suse 11.3 dual booting with Windows 7. Windows can detect the built in wireless card but not Suse, what can I do to get the wireless recognized in Suse.
View 2 Replies View RelatedI recently downloaded ubuntu 9.10. I have a dell d410 with a built in wireless card. It won't detect it, and I have no access to a wired connection for now.
View 6 Replies View Relatedopensuse 11.3 cannot detect my wirless card.
View 9 Replies View RelatedJust like the title said it won't detect my wireless card. Anybody know what's wrong with it?
View 9 Replies View RelatedI recently purchased an MSI A5000 notebook, but regrettably it happens to use an obscure branded wireless card that's given me quite a bit of frustration to get working. I do have a bit of history behind this card that might help to solve this problem. First of all the card is a Ralink rt3090STA, and the manufacturer does provide a linux driver for this card (available here)
I was using Ubuntu 10.04 32 bit until last week, when I decided that I would like to try using a 64 bit system. I would prefer to use fedora instead of Ubuntu for the time being. Ubuntu had some major problems recognizing the card for some time before I was able to get it to work. The process I used to resolve the issue on my Ubuntu system has not proven successful on Fedora 13 x64, and I would like any help I can get to try to resolve this problem.
I'm on an HP Pavillion dv4-1125nr with a Broadcom BCM 4312 network card.
I only have Ubuntu 10.04 installed on this computer.
ifconfig reports:
Code:
eth0 Link encap:Ethernet HWaddr 00:1e:ec:b5:b4:85
inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21e:ecff:feb5:b485/64 Scope:Link
[Code]....
It isn't even detecting the wireless card, and the network manager will only let me connect to wired networks (I'm connected to my router via ethernet cable right now).
I've pressed the LED killswitch but it does nothing (doesn't change from orange to blue nor does it have any noticeable effect on the network manager or the reports of the above 2 commands).
My laptop is supposed to have a 802.11 a/b/g/n wireless network card, but I can't find it. I've run lspci -nn without seeing anything containing. 802.11 in the output. Moreover, when I look into hardinfo->network->interfaces I only find the wired connection. Could anyone please tell me if these programs find all devices or if there could still be a wireless card here?
View 3 Replies View RelatedI own an EeePC 701; right now I'm giving 10.04.1 a test run on it, using a live usb.
The EeePC has an Atheros wireless card, but live Lucid doesn't detect it. Here's the output from a ifconfig command:
Code:
Will the card be detected by a properly-installed Lucid? Is there some package I need to install so I can use wireless? Or should I steer clear of installing Lucid on my EeePC?
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code]...
[URL]
Quote:toracat wrote:Quote:Reason for custom build is the need to disable ieee80211 and ipw2200 pre-built module in kernel. Trying to get wireless working, and I want to use the later versions of these modules in the hope to get wireless working.
I am getting obsessed with Linux OS up to the point of starting to swap MS OS.I opened WICD and it show (Wired network = 0 wired-default VVV and wireless network = C STR ESSID ENCRYPT BSSID MODE CHNL is this meaning that build in wireless card is or is not recognized? I will keep looking for info, although is hard to learn a new OS from scratch.
View 4 Replies View RelatedI just changed over from Ubuntu to Debian Squeeze and now my WiFi doesn't work. My computer is a Toshiba Satellite and the wireless card is Intel 2200bg. I think that's the name of it. That's the driver, anyway. My router is using WPA2, and using iwlist scan, I can see the network just fine. When I try to connect, though, it starts to connect for a while, says it's validating authentication, then says it fails. I've triple-checked my password and it's right.
View 9 Replies View RelatedI have got a netgear wireless PC Card WG511 made in Taiwan (not china). I have intalled it in windows w/acouple of ver. Settling on v1. I am first generation pc. maybe toold for Linux? I can't even figure out how to post in the Dam Small Linux website. But have read most of the posts in linux questions. I can't install a wireless card ;<( this is an old laptop and would be like usable if I get the *&^%$ wireless working. In fact, does anyone have a wireless card working with Dam Small Linux? I have the book but, it's not been much help. Other that telling me to add nodhcp in the boot startup. That didn't help either. I have learned alot through this misery of the wireless nic.
View 10 Replies View RelatedI'm running Ubuntu 9.10 on a Dell M6400, using Wubi for Windows 7 x64. My ISP sets my router password at source, meaning I'm unable to disable wireless encryption (which is WPA 2 Personal). That being said, I don't seem to be able to detect *any* wireless networks (I can still connect via ethernet, which does not require the password).
I'm not certain where the problem is, so I'll outline my steps and what the results were:
Under "System > Administration > Hardware Drivers" I have the "Broadcom STA proprietary wireless driver" installed (for BCM4311-, BCM4312-, BCM4321-, and BCM4322- based hardware)
The driver is activated and currently in use. When I type
"nm-tool", I get NetworkManager disconnected
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
[code]...
Right so I just bought an Acer TimelineX with a Broadcom BCM43225 BCM43225 802.11b/g/n WiFi card. With this card I am not able to detect any wireless networks and after googling around I found out other people have had similar issues. But my problem is kind of unique in the sense that I'm using Backtrack as my Linux distribution (I'm not a blackhat or anything, more of an enthusiast with no malicious intentions) Also I'm not a God at Linux so if you have any solutions please be verbose! I tried the following: [URL] But the Makefile spits out a syntax error. (Makefile:29: *** missing separator. Stop.)
[Code]....
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
I have just install Redhat Enterprise Linux5, 2.6 kernel,Foxconn motherboard,model 45GMX-V but Linux did not detect the Onboard LAN card.Although when i use winxp it detects the card as RTL8139/810x.
View 4 Replies View RelatedCode...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
I installed a sound card but when I go to System->Preferences->Sound and go to Hardware it's not showing anything at all. If I boot from the Live CD then it will show the card and it works. How can I make my Linux installation detect this card? I was thinking that I could somehow copy the necessary files from the Live CD to make this work, but maybe there's an easier way.
View 1 Replies View RelatedSince I have upgraded to Ubuntu 10.04 Lucid Lynx, my second graphics card isn't detected by X server. When I do an lspci I get both listed though. I am using NVidia's driver v195.36.24
View 1 Replies View RelatedAfter switching over to linux on my desktop PC (ubuntu) I would like te learn more about linux.I'm trying to get an ELO touchscreen working on an IBM thin client. At the moment I managed to boot it from a CF card.(normally it boots kernel.2200 from a host PC but to avoid interference with the operating system, a flight simulator, I want to try it first with the system booted from a flash card)
I tried to install the 32 bit Linux driver from the ELO-website but did not succeed.I was following the manual.I managed to extract the files and copied them to the right directory but when I type in "make" the command is not recognised. I don't know if it would ever work, but when I tried "make" on my Ubuntu machine I get error #2?! What does that mean.