Networking :: Operate Vodafone E220 Modem On FC 13?
Nov 6, 2010
I have installed the 3 following pakages of Fedora 13 ozerocdoff-0.4-1.fc11.i386.rpm usb_modeswitch vodafone-mobile and after that I have given the command
vodafone-mobile-connect-card-driver-for-linux-debug
all I see after that :
vodafone-mobile-connect-card-driver-for-linux-debug
/usr/lib/python2.6/site-packages/twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[Code]....
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
View 2 Replies
ADVERTISEMENT
Jun 18, 2010
i have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
View 2 Replies
View Related
Mar 26, 2011
I can't using my usb modem on ubuntu 10.10.
I use vodafone usb modem, without detail information of what type or chipset used.Here is what I can collect, when I plugged the usb modem to laptop..
result of dmesg..
---start---
[ 956.873758] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 956.974318] scsi5 : usb-storage 1-1.1:1.0
[ 957.974336] scsi 5:0:0:0: CD-ROM HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 957.975167] scsi 5:0:0:1: Direct-Access HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
code....
how can I troubleshoot the problem, so the usb modem can work properly.
View 1 Replies
View Related
Jun 1, 2011
I want to get a vodafone internet stick, but "they" say I have to install: vmb_1.1.0-0_i386.deb, downloaded the file and get this error: Dependency is not satisfiable: libboost-serialization1.40.0 (>= 1.40.0-1) Now it turns out that I have libboost1.42.0 (1.42.0-4ubuntu2) installed...
Am I right in assuming that vodafone is to blame for the software not working?
Is there anyone who has got this software to work or has any tips?
View 3 Replies
View Related
Feb 4, 2011
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies
View Related
Aug 23, 2009
I want to configure the Huawei E220 modem I recently bought in Fedora 10. I read lot of detail documents in the internet. All were interesting and explaining the wvdial.conf file. The problem I have is that, the file asks for the phone # to dial, username & a password. I don't have these information since my ISP didn't provide those. It works perfectly in Windows, in which above information are not needed, because when plugged in Windows, a software installation launches, which does the job to connect to the internet. So, is there a way to configure the modem to connect to the internet without those information. Because my ISP refuses to provide those, when I called there customer services.
View 3 Replies
View Related
Aug 27, 2010
I use Hauwei E220 modem to connect to the internet but for some reason it doesn't want to connect anymore. It works perfectly in XP, it picks just about every wireless network in my area (which I have no access to), it works beautifully if I plug it in before switching on my PC. If, however, I plug it in when the PC is on then nothing
Strangely, it used to work fine then somehow forgot what its supposed to do...
View 6 Replies
View Related
Aug 5, 2010
I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
View 7 Replies
View Related
Jul 9, 2010
I have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings:
1. Make a new GSM Connection in kNetworkManager and enter settings there
2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to ""
3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
View 3 Replies
View Related
May 8, 2010
I am new to linux (Ubuntu 8.10). I don't know anything about sudo commands. At the moment I am using windows to connect to the internet because I con't get my vodafone K3765 USB 3G modem instal om Ubuntu. There is only .exe installation files on the stick. Every thing I try I first have to download it to a disk, restart my pc in Ubuntu and then try it if it dus not work,I have to restart my pc in windows connect to the internet and ask again. I love Ubuntu but I need internet.
View 3 Replies
View Related
Mar 29, 2011
i try to connect vodafone usb modem on it but m unable to connect
View 1 Replies
View Related
Dec 7, 2010
My name is Mayan Viljoen & I am from South Africa. I am very new with Ubuntu and I don't understand why the Vodafone 3G modem HSDPA USB stick (model k3570-Z) which I recently bought should not like Ubuntu as much as it does Windows. I want to work on the Ubuntu side of my split hard drive rather than the Windows side. It is notoriously difficult to get connected to the net on the new Ubuntu with this 3G modem. Is it because it is really manufactured for Windows or is there another reason? It will only really connect approx. 1 out of approx. 8 odd times on the Ubuntu 10.8 Operating System, which is very annoying to me. What can be the reason for this? If it is that this modem was really made for Windows, what then is the best 3G modem and network to use with Ubuntu 10.8?
View 2 Replies
View Related
Feb 22, 2011
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies
View Related
Apr 26, 2010
just install my HP notebook with Ubuntu 9.10. My problem is my ubuntu can't detect my Maxis Huawei E1762 (its not E220 - sorry) usb modem.
View 4 Replies
View Related
Apr 12, 2009
i'm looking for any documents or video tutorial for How to Start VPN SERVER on Cent os 5, i'm going to make VPN accounts and set monthly bandwidth on each ,on my Server and let to client's to connect to server via VPN Connetion, such as [URL]...
View 1 Replies
View Related
Dec 11, 2010
We recently got a new mini PC which came pre-installed with Ubuntu 10.10, so far, so good. Today, we invested in a Vodafone broadband dongle (model number: K3570-Z/K3571-Z). I've installed the dongle on our old XP machine, with no problems, however, Ubuntu won't even recognise that it's plugged in. What am I doing wrong? We've had the new machine for 3 days, so I'm really new to all of it and haven't learnt how to use the command prompt yet, so I'm hoping someone has some advice for a complete beginner. I can't understand why it's not recognising that somethings plugged in, because from what I've found, you need usb_modeswitch in over for the dongle to be recognised as a modem.
View 6 Replies
View Related
May 3, 2011
I have a Vodafone (UK) PAYG USB stick (Huawei K3565 v2) which worked perfectly out of the box in 10.10. I also installed Betavine Connection Manager but never actually needed it. Since upgrading to 11.04 the stick won't connect. When I plug it in I get a green flashing light then a blue one but it never registers with Connection Manager. Nothing I can do tweaking the settings seems to make it work either.
View 9 Replies
View Related
Jan 9, 2011
I need Internet on the road so brought a netbook and a USB Mobile Broadband stick. I've followed the installation instructions provided by the provider but this still does not work. I've also tried a couple of similar installation instructions found around the net. Has anybody had any luck getting this to work in Fedora 14? How did you or how can I get this to work?
View 1 Replies
View Related
Jun 14, 2011
My PC crashed and I replaced Windows XP with Ubuntu. My laptop is still on Windows. Haven't been able to connect to the internet on my PC, Linux IT guy told me there was an issue with drivers on Ubuntu. Was told the Ubuntu community would know how to fix this. I've been reading through the posts and found a similar sort of problem posted with a solution posted also. The solution it seemed, lay in the Sakis website. I went to the Sakis website and downloaded Sakis3G onto my memory stick via my laptop. I need to get internet connectivity on my PC. My friend advised me to put the stick into the PC and then to open the terminal and type the following commands: gunzip sakis3g.g2 > chmod+xsakis3g > /sakis3g --interactive. Each command on a new line however after typing the first line: gunzip sakis3g.g2, I got 'No such file or directory'.
View 9 Replies
View Related
Jun 23, 2011
I 've problem with this usb stick to connect to Internet. I desperately tried for 6 long hours but could not resolve it! I almost tried every possible / meaningful solution but none worked! My system detects the modem but it says NO CARRIER !
Code:
chinmaya@chinmaya:~$ sudo wvdial
--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
[Code]...
View 9 Replies
View Related
Aug 2, 2011
Anyone know how can get a vodafone huawei 4511 dongle working on ubuntu?
I've spent several hours reading stuff, most of which is way above my head.
I plug it in, set it up in "edit connections". Nothing happens.
It shows up in disk utility twice, as a usb vodaphone storage (huawei) and cd drive (vodafone cd rom)
I switched from puppy to ubuntu because I read that you could just plug dongles into ubuntu and they would be recognized. (Spent many many hours trying to get it working in puppy.)
View 8 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Feb 12, 2010
I'm new here. This is my first post. Something tells me my problem will be met with great sighs and shrugs of shoulders. I think you may have heard this problem just a few thousand times. couple of days ago i took the plunge and installed Ubuntu 9.10. I already run XP Pro. I have the system set for dual booting until i get to grips with Linux and have all that i use daily from software to hardware comprehesively installed and running. then i have this ideal romantic dream of dumping my microsoft heartache, and living a happy life with the new love in town (an OS that works!)
Vodafone (Huawei K3520) mobile broadband dongle. Yes i know its a touchy subject but i am going cross-eyed reading info on various forums from this one to the betavine forums and a detour through vodafone themselves. I just can't find clear concise info on how to get this dongle up and running with Ubuntu. My laptop is Acer Aspire 5633 WLMi. I would really really appreciate your help on this subject i need to get online with this dongle and Ubuntu.
View 9 Replies
View Related
Feb 19, 2010
[The configuration here is based on Celcom Malaysia's setting]
Download 3 debian files from Borneoubuntu's Blog
install ozerocdoff_0.4-2_i386.deb
install usb-modeswitch_0.9.7_i386.deb (depends on Ubuntu Ver, if not necessary don't install)
install vodafone-mobile-connect_2.1.5.01-2_all.deb
select apn setting "celcom malaysia/malaysia/contract"/OK
[Code]...
View 7 Replies
View Related
Oct 3, 2010
I have a Vodafone mobile broadband dongle for the United Kingdom. The installation software is for Windows and Macs only. In Windows it works fine. If I plug the dongle in the USB in Ubuntu then it is recognised but the installation does not start (quite understandably). So I tried using wine with the Windows executable. It starts off promisingly, then hangs. Some files are created along with desktop icons but the installation does not complete.
I have seen here (http://ubuntuforums.org/showthread.p...light=vodafone) the comment that Vodafone installation can be tricky. So, can any kind person tell me if it is possible to get Vodafone dongles working under 10.04? Also, are there any other UK broadband pay-as-you-go dongles that will work? I have seen in a very recent post that "3" seems to be plug-and-play?
View 5 Replies
View Related
Aug 13, 2010
i have a usb modem 3g huawei k3520 that is installed on FC13 minimal only shellli have see that my modem is config with dmesg ....
now i want to create a conection to my provider on boot ... can anyone help me find the files where i create my conection and how can i make my modem to conect autom on boot...????
i m newbie and i don t no very well the shell....
View 3 Replies
View Related
Jul 2, 2011
I have been trying to set up a network bridge for the 2 virtual machines installed on my Fedora 14 host PC. I want the VM's to be able to ping each other and have their own "network" in which they can operate/communicate. What is the simplest way to accomplish this? Most of what I have read revolves around turning off NetworkManager, and the following config files:
[code]...
Once these files are configured and the network is restarted, the bridge should work. Is this true? I have been encountering problems with this process, specifically when I try to link a VM to a bridge.
View 2 Replies
View Related
Jun 19, 2010
I have two laptops, all using Ubuntu Lucid. Just now I tried using a USB Modem Huawei E220 in both but was not detected as a modem. Why? Would have Lucid Ubuntu does not support Huawei E220? If yes, why? Whereas the older Sierra 881 could be used. For the record, before I use Ubuntu Karmic on both the laptop and all could use. Huawei E220
View 1 Replies
View Related
Mar 8, 2011
I'm a new on da linux network, wanna to install redhat interprise 5 but I have to format ma x windows first ( for ever ), but I have to know how toinstall and configure ma modem first ( Huwaie E220 ) to be in touch with da network
View 4 Replies
View Related
