General :: Unable To Start RALUS Service - Download Libstdc++.so.5
Sep 1, 2010
I trying to install RALUS on my RHEL 5 os version 2.6.18-8.el5 (i386) My backup exec server is BE 2010 R2 the installation of ralus completes however with error libstdc++.so.5 missing noted that due to this i'm unable to start ralus service /etc/init/VRTSralus found a link [url] need to download compat-libstdc++-33-3.2.3-63.i386.rpm tried the rpmfind.net and as well as rpm.pbone.netid did find appropriate rpm however could not download one.
i was download ralus "ralus2213HF314380-Linux.tar_314390.gz" when i extrack it's just result "installraluspatch.sh" and "HF314380-Linux.tar" not have result "linux" where file "installralus" is in. can someone tell me where i can to download ralus packet which have contain "linux" directory..
I have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
I've just install RALUS (linux backup agent) from BE 2010 R2 by manually uploading it to the server and then extracting it followed by executing the install script.
After the install i deleted the extracted directory, when i go to my Media Server i cannot browse for this server eventhough i already put the IP address of this server.
Here's my diagnostic regarding this error:
Code:
file: No such file or directory
Where can i download that file so that i can SCP to the proper directory in my Fedora COre 5 x86 Linux server ?
i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
How to repartition a hard drive using Mepis 3.3, none of the listed sites will open to me. Is this the best software to repartition a new Windows 7 hard drive? I notice there are later versions of the Mepis software.
First I go to the following URL to download the latest version of VLC Player, which I greatly prefer to Totem or any other standard Linux video/audio player: http://www.fileguru.com/Movie-Player/download. After I click on the "Download" link, a new window appears which asks me if I want to 1) Open with Archive Manager (default) or 2) Save File. There is a drop down arrow next to the first choice which only gives "Other..." as the only other choice. Well, if I choose the first option, the download appears as an .exe file in the "Downloads" window.
A window with "Download Error" in its Title Bar appears with the following message in it: "/tmp/VLC_Player_Setup-3.exe could not be opened, because the associated helper application does not exist. Change the association in your preferences." I don't even know yet how to even open up an .exe file in Linux, despite repeated research.
I installed MySQL and I want the service to (always) start. When I google I always find the same answer; Goto System > Administration > Services. But I don have it. Administration for me goes from 'Printing' to 'Software Sources', so there's no 'Services'...
Also should I be able to start it from a shell, but I also can find that. (I have no /etc/rc.d/-directory and my /etc/init.d/-directory han no 'mysql'). I just started using Linux a few days ago (I only used MaxOsX and Windows before).
I have a service/daemon that won't start from boot. I have used the chkconfig --add <script name> command that went ok I also used the chkconfig <script name> on and that seems to be fine and I have made the script executable Chmod 777 <filename>. By all account it looks like the script is running at boot the the services has not started. When I do a ps -ef | grep ndb_mgmd this process is no there. the script can be run from the console and sems to run fine!
#!/bin/bash # chkconfig: 345 70 30 # description: MySQL Cluster management server start/stop script echo hello Paul >> /tmp/hello.txt configdir=/var/lib/mysql-cluster/
I know I have to count how many instances are running: ps x | grep apache2 | wc -l result if it's running: 2, or else: 1 I also know there is a command called test that I could use to perform the verification, but I don't know how to use test with wc
My dhcpd service get failed every time when I try to start it 1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24 2) And I have a internet connection wirelessly which has a network 192.168.2.0/24 Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server: # dhcpd.conf # # Sample configuration file for ISC dhcpd # # option definitions common to all supported networks... option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; # Use this to enble / disable dynamic dns updates globally. #ddns-update-style none; .....
I have installed version of ntop 4.0.3 by guide.But I can't start ntop daemon/service. I didn't find a service file for starting.During the installation there was no problem only want to RRDTool so I installed that. Now there is no necessary package required.
I configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
I have found so many ways for root user to execute commands in so many possible path locations - but having difficulties on executing commands as normal user - during start up.This is what i've got for /etc/rc.d/rc.local script:Code:su -l user && (/bin/sh svc_cmd.sh &)But the command doesn't run at all...
The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
Recently i've upgraded my fedora 11 to 12 using the preupgrade command and now I have a problem booting! when i start the interactive boot it hangs after trying to run the service local, it looks as if its trying to boot because the cursor blinks really fast then blinks normally after a few seconds. no error was stated during the event. what seems to be the problem here?
I am trying to setup the "NIS" server in my server . But I am not able to start the "ypbind" service. May I know anything wrong in my configuration?
( 1 ) type "system-config-authentication"
( 2 ) tick on "NIS" Support and key in "RHCE" as NIS Domain and "IP_Address" ( My test computer IP Address , is it correct to use my server IP address ? )
( 3 ) click OK twice.
( 4 ) I received the following error message.
[root@server ~]# system-config-authentication Stopping portmap: [ OK ] Starting portmap: [ OK ] not registered: 100000 2 tcp 111 portmapper
I am using Fedora 13. and had bought MTS Mblaze Mobile Broadband device. One installer comes with this device for Fedora, I have installed it.There were some issues while starting this application on fedora. But after seeing some threads for SELinux, it had been solved.Now, when I run this software, a window appears. If i clicked connect, it does show connecting and once connected automatically firefox opens.
But i am not able to access internet. After some time software shows device is in sleep mode due to inactivity. Network connectivity icon on launch panel on fedora shows network is connected.I had similar problem with Mandriva 10..
I have a problem about to open zebra service after install quagga by command(./configure ; make ; make install ) and add service port ("/etc/services")
#service zebra status zebra dead but subsys locked
and can't telnet to zebra "telnet: unable to connection to remote host: connection refused"
I following a manual http://www.quagga.net/docs/docs-info.php but it's not perfect.