I have a netbook with a XP/SuSE dualboot and I want to get rid of SuSE, I have EASEUS partition and I know thats probably the easiest way to get rid of it, but the problem is the loading screen, seeing as im on a netbook, the xp disk is out of the question and I lack a usb cd drive, how would I go about removing grub?
View 5 RepliesUnfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
i just upgraded from 9.10 to 10.04 and the interface isn't completely loading. the desktop loads and i can run programs through alt-f2, but no interface shows up.
View 1 Replies View RelatedI have a netbook with a maximum screen resolution of 1024x600. I'm running a dualboot Ubuntu10.10 & Backtrack4r2, and I'm having some trouble with windows whose "height" was larger than 600px. Buttons end up below the screen, and I can't click 'Ok' or 'Cancel' or 'Apply'.
When my OS was still Windows7, I didn't have any problems because I can resize all of the windows that I use. Most of windows in linux (esp. in KDE settings), the windows has a fixed height.
Is there any workarounds to my problem?
I'm very new to Ubuntu, I'm running 10.10 Netbbok Edition.
I installed it a couple of weeks and everything was working fine, last night I did an update and now none of my browsers are working...
Chromium and Chrome will load but show a "oh snap" error window.
Firefox will only load images but no text...
I know there is no such thing as Restore Point, like in Windows.
Following this issue: [url] my laptop has been really slow. I think it's just the desktop, as nothing else appears to be that slow (except firefox loading).
I've looked in processes, and there are no obvious issues there. I still have all 1gb of my memory plugged in and I still have a 1.6ghZ processor (at that speed).
I am trying to install Ubuntu Netbook on an iiView A2. I realize this is not necessarily supported according to the Ubuntu documentation, however, one of my friends who has the same netbook was able to accomplish this with no issues. The computer boots up from the USB just fine, I get to the menu and choose install Ubuntu. I see a cursor flash on the screen for a second and then the Ubuntu logo. Immediately after seeing the Ubuntu logo the screen goes black (or blank) and I get no HDD activity (or any other activity). I have let it set for quite some time but it does not appear to be doing anything. This same kind of thing happens when I choose Try Ubuntu without installing from the initial menu after boot.how to install from the command line and edit xorg.conf later?
View 2 Replies View RelatedLong, sad story made short. I have a Samsung Netbook running Windows XP Home, SP3. I set it up to dual boot with Ubuntu, just so I could play around with Ubuntu. Well, Ubuntu started giving me trouble: my internet connection went south, I was unable to adjust the brightness of the Netbook screen, etc., and when I looked for troubleshooting help on the internet, it was all Greek to me as it involved working with Terminal.
I did a search for removing a partition in Windows XP and found "How to use Disk Management to configure basic disks in Windows XP" on the Microsoft and followed the instructions there.
[Code]...
i have a splash screen i want to use while gnome is loading (well it is a pic rather than a splash) rather than black screen till gnome i use ubuntu 9.04 or macbuntu as i call it (is looks exactly like a mac) so can i use a image while gnome is loading ?
View 3 Replies View RelatedI have tried to boot Ubantu 10.04 several times and every time the screen is unreadable, the desktop is broken up into about 5 vertical sections and that's as far as I can get. Help. I have a HP Pavilion dv6000 laptop. other versions of Ubantu work okay.
View 1 Replies View Relatedi have installed ubuntu 10.4 on my compaq 615 system successfully but when i restart the system it freezes, jus giving me a blank screen... i already have windows 7 home premium on the system then i partitioned sum space for the ubuntu but it still dosent work...
View 4 Replies View RelatedI got a new Lenovo S20 and I am having trouble loading Linux. I've loaded these variants with no success:
Ubuntu desktop
Ubuntu server
Linux Mint
CentOS
vmWare esxi
The live CD's run, and very nicely at that. But once I install to the workstation they won't boot. I just get a blank screen. I've tried different bootloaders.. I've toyed with different BIOS settings.. I've even installed to different drives (a hard disk and an SSD). Maybe a hint: BSD installs and runs with no problem at all. I have PC-BSD running at the moment. It's nice, maybe I'll keep it. But I'd rather have Linux.
My amateur computer science mind sees this as not a boot loader issue (recovery mode shows Linux seems to be loading to a point.. but I can't see the script line just before the lockup) not graphics related; UB Server and vmWare are text-only and they won't load either probably not a bios issue (liveCDs run and other people run Linux on S20s) not hardware (Windows and BSD run on this one)
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View Relatedlike any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
my play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?
View 14 Replies View RelatedWhy i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I have been playing with Maverick (and this was the same on earlier versions).When I am on my netbook (a 10.1" compaq mini with resolution set at the highest setting - 1024x600) I cannot see the whole window. This happens frequently in Eveolution where the bottom of the window is 'missing' so I cannot click ok when changing setting ect. This is extremely annoying and it is the only reason why I am still running Windows on my netbook.
View 3 Replies View RelatedSO, after about a week of research and trying to get the splash screen to appear on my netbook...I've sort of got it...but not. Here's the low down.
1- Had no boot splash at first. Now I do in low rez.
2- Had shutdown splash in Hi rez...now in low rez.
3- Boot splash lasts about a second at best...prior to that... black screen after I select ubuntu from the boot menu.
I have tried editing grub, updating afterwards, startup manager, online text help...nothing seems to be working to get the end result of Nice looking Plymouth splash screens (the nice purplish UBUNTU screens)
My netbook is an ASUS 1005PE with 2 gigs ram. Ubuntu is the only O/S (Boot menu shows the back up of the win7 install on my smart card). I am running the 64bit version. I also have Ubuntu on my HP HDX18 dual booting with windows7. No issues there. Hence my confusion.
Now...I'm not the most Linux sauvy to say...the last time I looked at Linux was Redhat back in '95 or '96. I'm a dos guy... so I'm not opposed to learning...just need to understand it better thats all. Anyways...if anyone can shed some light on this, that would be awesome. Aside form this hickup, everything seems to run just fine.
On this Lenovo netbook: I was playing with Firefox, came across a security.ubuntu.com problem, established in general terms what it was referring to and that it might be easier just to reinstall Ubuntu andupgrade to 9.04.Succesfully installed, it said, please to do a restart. But the screen is blank. Now, all I have is a totally dark screen whether booting off the hard drive (it starts running and clicking, then stops clicking; staysrunning 'til I switch off again) or via the external CD drive (which lights up, flashing, for a few moments while clicking, then runs down).
I've tried the Ubuntu CD which originally installed ok, and also the one from which I'd first installed Ubuntu instead of XP.I wondered if I'd inadvertently switched off the screen, but apparentlynot - in any case, presumably it would default to On? I've also looked forsomething on an external screen, I know that works because I played with
it a few weeks ago. fn-F" to toggle the screen doesn't do anything, nor fn-up/down to change brightness. I've just tried ctrl-alt-backspace, with CD and HDD, to no effect.
The battery's fully charged but in any case I'm using the psu and alllights are correctly lit. I've reseated the CD leads several times to besure.I've never networked it to the desktop - it had seemed a good idea to keep them separate so only one gets broken.
I'm trying to play Regnum Online on a netbook and windows is way too big for the screen, and it wont let me resize it
View 5 Replies View RelatedI have an EEE PC 1000H, which comes with a 10.2" monitor with 1024X600 resolution. Ubuntu mostly works well on it, but on certain applications I cannot see the buttons that would appear at the bottom of the program. This has happened on the Disk Utility and Gnome Color Chooser
View 5 Replies View RelatedI've got a Disney edition Asus EeePC with an xp/9.10 nbr dual boot.The 9" screen has a native resolution of 1024x600, but in xp it can expand that to 1024x768- either by scrolling the desktop up and down a bit, or by what they call "LCD Compress" mode, where ever thing gets squished vertically a bit to fit 768pixels of info in 600 pixels of space.
My daughter uses it to play games on webkinz.com, and their games pop up on a 800px high non resizable or scrollable window, so there are controls and junk that fall off the bottom that can't be reached unless I'm put it in one of the 768 pixel modes. That, and with her task bar set to auto hide, she can play games and have a good time. how do I set up Ubuntu 9.10 to do the same thing? Right now, the only screen resolution in Ubuntu is 1024x600.
I'm running Fedora 10, it seems to boot normally, but the login screen never appears. all it shows is the cursor with the blue circles running around it, meaning its working on something. I let it sit for about 10 minutes and still no login screen.
View 8 Replies View RelatedI have the new Ubuntu 10.04, installed through Wubi. It was fine for ages, graphics working fine and sound. Then it asked me to seemingly install my graphics card drivers. I did so, rebooted and not the loading screen is stretched at the wrong ratio and doesn't get past displaying 5 red dots. How can I get it working?
View 3 Replies View RelatedMy computer shut off randomly when battery died now my computers log in screen won't show.
The area where I put user and pass is completely black but I have mouse control its all I see a loading mouse pointer.
When ever I try to do sudo Apt get update I get things like " w: failed to fetch [url] There's a lot of them similar to that one failed to fetch
I've also tried to do compiz thing also I had no luck doing so anyone know how to resolve?
I would like to remove the linux loading screen, right after the system boots from the boot loader (grub) to be black blank until it loads!?
View 5 Replies View RelatedI installed Ubuntu netbook remix on an HP mini 110-3130 and its working great. My only complaint is that with certain webpages or programs part of the window goes beyond the dimensions of the screen. Is there any way for me to fix that? for example some program windows go below the screen and others go further right than the screen. I have attached an image that serves as the perfect example.
View 2 Replies View Related