I've got a Disney edition Asus EeePC with an xp/9.10 nbr dual boot.The 9" screen has a native resolution of 1024x600, but in xp it can expand that to 1024x768- either by scrolling the desktop up and down a bit, or by what they call "LCD Compress" mode, where ever thing gets squished vertically a bit to fit 768pixels of info in 600 pixels of space.
My daughter uses it to play games on webkinz.com, and their games pop up on a 800px high non resizable or scrollable window, so there are controls and junk that fall off the bottom that can't be reached unless I'm put it in one of the 768 pixel modes. That, and with her task bar set to auto hide, she can play games and have a good time. how do I set up Ubuntu 9.10 to do the same thing? Right now, the only screen resolution in Ubuntu is 1024x600.
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
I bought a Asus eeepc a few days ago which I really like, with the exception of one thing - windows 7 starter. I like Windows 7, but starter is just bad. I also really like ubuntu, so I've decided to put it on my netbook. I download the netbook edition from the site, put it on a usb drive, and than tested it out - well, my screen is dim, very dim. Changing the brightness setting on the tool bar up top doesn't change anything, and using the function keys does change it, but still keeps it very dim.
I've tried restarting my computer, same thing, I've tried messing around with settings in the battery options, nothing... I really don't want to install it if its going to be this dark, I can see things, but its not very pleasant to use. I'm starting to consider that its the problem with the file I downloaded. Theres nothing wrong with my netbook, everything worked perfectly fine in Windows 7. I use the full version of ubuntu 10.04 on my other laptop which works perfectly fine, I'm not sure why this version is acting so weird on my netbook.
After installing some (much needed) upgrades, I am stuck being unable to install nvidia-settings after screen-resolution-extra upgraded from .11 to .13. Nvidia-settings, supposedly, requires .11. I can, of course, downgrade to .11, but I do not know if this is recommended. Is there anyway to get nvidia-settings back without downgrading? What is a good course of action?
Just got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
I've installed Fedora 12 KDE using VMWare, but I can't for the life of me get my display settings to stick. When I change the resolution, my display responds appropriately but upon logging out or rebooting, these settings are lost. Am I missing something completely obvious here?
I am loving Slackware, but my Westinghouse monitor is having a hard time recognizing the screen resolution. After typing in startx, I get a black screen. I can plug my box into my trusty test monitor, change the res to a config that the Westinghouse will recognize,then switch monitors and all is fine.How can I edit the res and have Slackware remember the settings? This happens every time I reboot. I am logging in as root, I have not added a user yet at this point.
Recently I have acquired 2-port KVM switch. When the monitor is connected through this KVM in Windows 7 resolution is properly detected - 1280x1024. When I go under Linux (openSUSE 11.4 with KDE, nVidia 260.19.44) there is a problem with the resolution. In the screen settings does not appear a resolution higher than 1024x768. How do I set the desired resolution in Linux?
This is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.
I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.
I'm a relatively new Debian user, having come from Ubuntu. I recently bought a Dell micro-server to function as my Kodi media player. I installed an nVidia GeForce 210 to output to my Pioneer home theatre amplifier. The amp takes all my inputs (eg. Satellite set-top decoder, PS3, Kodi etc) and outputs to the TV. I installed XFCE as my desktop environment so that I could still interact with it via VNC.
Everything is working great except for one exceptionally annoying problem! Every day, I find that I am having to VNC into the desktop, load up nVidia X Settings, and change my screen resolution from Auto to 1920x1080 because it has lost the display configuration and the screen is blank. I presume this happens when the amplifier switches from one input to the next. It doesn't matter if I save the configuration to my X11.conf file or not - it still resets itself.
Before, this setup would run for months without any intervention (Same amplifier + HP microserver + Ubuntu + LXDE + ATI video card), so I'm pretty confident that the issue is either Debian, XFCE, or the nVidia card.
Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
I've been trying without success for the past couple of weeks to setup a filtering system for my little sister's netbook. The main problem I've been running into is inconsistency. First, I tried using dyndns per the instructions here: [URL] The problem with this is the DNS settings (and in turn the filtering settings) dont appear to 'stick' once the Netbook touches a different network. So if I sign onto a different wireless network than the one I used to set up the filtering, it stops working. The reason why is Ubuntu will overwrite the current DNS settings with those of the new network (I have no idea why, and am too frustrated to figure out).
Also, I noticed that even if the settings did stick, they're fairly easy to disable because all she has to do is stumble across the DNS settings, change them back and voila. I've had great success with OpenDNS on Windows boxes, but there doesn't seem a to be a feasible way to apply it to Ubuntu. Dansguardian looks like it may be worth a shot, but I've seen dozens of "simple" configuration guides, none of which that actually looked simple. So my question is this, what is the easiest, most bulletproof way to setup web filtering 10.4? Preferably something that a 12 year-old could easier find her way around.
I changed my display resolution to 832x624 from a higher resolution. Now all my resolution higher than 832x624 have disappeared and I cannot set a higher resolution.Does anyone know how I can get my higher display resolutions back.
Every time i boot up my computer (ubuntu 10.04) my screen resolution gets reset back to 800x600 when i want 1024x800. I save the configuration file, and when my computer starts i get this line in xorg.conf,
I just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
I have never used Linux always windows so heres the problem the display only has 2 settings 640x480 and a smaller one and it say unknown monitor. I installed the drivers in hardware driver in systems I'm running Ubuntu v 9.10 if that matters and the video card is a Nvida mx440.
i'm having a problem with nvidia-settings is that my resolution is not listed in. the only resolutions available are 640x480 and 320x240, the "detect display" doesn't work either.by the way i'm using the driver from nvidia site.other point is that i couldn't change resolution on kde before i installed the nvidia driver, it just showed the same two resolutions, i thought it was because i hadn't install the nvidia drivers but i got the same problem.
Cheese works sucessfully with my webcam, but the stuff it records in .ogg is pukeish of quality. I have a dual core high performance laptop and am wondering if there is no way to crank up the resolution or lessen the compression on the videos that get saved for higher quality. Cheese seems to have no settings whatsoever.
Before I upgrade to 10.4 It would be nice to find the best solution to this problem. I use a KVM switch that dont pass the EDID info from the screen to the OS. To solve this, that is, to get the correct screen resolution, i need to pass monitor and screen info to the OS at every startup. One way is to ad a script to /etc/gdm/init/default, or in KDE /etc/kde4/kdm/Xsetup.
in my media pc i have a geforce 8400, attached to a 32" 720p lcd using a dvi to vga adapter, and it is miss detecting the resolution it detects the resolution as 1080p, so when i try to enable full gpu scaling it gets the resolution wrong resulting no image on the screen. how do i manualy set the "back end resolution"
I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).
I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.
So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
I have been playing with Maverick (and this was the same on earlier versions).When I am on my netbook (a 10.1" compaq mini with resolution set at the highest setting - 1024x600) I cannot see the whole window. This happens frequently in Eveolution where the bottom of the window is 'missing' so I cannot click ok when changing setting ect. This is extremely annoying and it is the only reason why I am still running Windows on my netbook.
SO, after about a week of research and trying to get the splash screen to appear on my netbook...I've sort of got it...but not. Here's the low down.
1- Had no boot splash at first. Now I do in low rez.
2- Had shutdown splash in Hi rez...now in low rez.
3- Boot splash lasts about a second at best...prior to that... black screen after I select ubuntu from the boot menu.
I have tried editing grub, updating afterwards, startup manager, online text help...nothing seems to be working to get the end result of Nice looking Plymouth splash screens (the nice purplish UBUNTU screens)
My netbook is an ASUS 1005PE with 2 gigs ram. Ubuntu is the only O/S (Boot menu shows the back up of the win7 install on my smart card). I am running the 64bit version. I also have Ubuntu on my HP HDX18 dual booting with windows7. No issues there. Hence my confusion.
Now...I'm not the most Linux sauvy to say...the last time I looked at Linux was Redhat back in '95 or '96. I'm a dos guy... so I'm not opposed to learning...just need to understand it better thats all. Anyways...if anyone can shed some light on this, that would be awesome. Aside form this hickup, everything seems to run just fine.
On this Lenovo netbook: I was playing with Firefox, came across a security.ubuntu.com problem, established in general terms what it was referring to and that it might be easier just to reinstall Ubuntu andupgrade to 9.04.Succesfully installed, it said, please to do a restart. But the screen is blank. Now, all I have is a totally dark screen whether booting off the hard drive (it starts running and clicking, then stops clicking; staysrunning 'til I switch off again) or via the external CD drive (which lights up, flashing, for a few moments while clicking, then runs down).
I've tried the Ubuntu CD which originally installed ok, and also the one from which I'd first installed Ubuntu instead of XP.I wondered if I'd inadvertently switched off the screen, but apparentlynot - in any case, presumably it would default to On? I've also looked forsomething on an external screen, I know that works because I played with it a few weeks ago. fn-F" to toggle the screen doesn't do anything, nor fn-up/down to change brightness. I've just tried ctrl-alt-backspace, with CD and HDD, to no effect.
The battery's fully charged but in any case I'm using the psu and alllights are correctly lit. I've reseated the CD leads several times to besure.I've never networked it to the desktop - it had seemed a good idea to keep them separate so only one gets broken.
