I've installed Slackware 12.2 on a 12 year old desktop. It is the only OS on the machine. When I press the Power button it stops at Slackware's splash screen asking me to choose an OS, even tho' there is only one to choose from. I installed LILO to the MBR and that is also listed there as a possibility.
Is there a way to set Linux so it will simply load automatically?
I'm loging my slackware as a simple user After each reboot I need to start cupsd for my printer nfsd and mountd to export my shared directories I use init 4 for my desktop I would like these services to start always without the konsol and the command lines.
View 8 Replies View RelatedI'm curious as to why some things are not happening at boot time (i end up having to manually load them).
In /etc/rc.d/rc.modules (near the bottom) i have set "CPUFREQ=on" and commented out any modules not specific to my hardware.
I have left this one uncommented:
Code:
And below the "### CPU frequency scaling policies:" i have;
Code:
uncommented. My scaling governor is set to:
Code:
Now whenever i reboot my machine `lsmod` is not showing any of either powernow-k8 or cpufreq* related modules.
I know i could use /etc/rc.d/rc.local with these:
Code:
But seems to defeat the purpose of rc.modules, any idea why they are not being loaded at boot... ?
Code:
With slackware64-current
I want to automatic mount a ntfs partition after start. I work on fstab, everything seems to be ok, but now something strange is happening: sometimes after boot, when I use fdisk, I find all the partitions as sda, sometims they seems to appear as sdb. Of course, if in fstab I have written sda and they are sdb, they will not be aoutomount... I am using fedora 14 I was expecting that allways the partitions to be sda or sdb.
View 1 Replies View Relatedyou can refer to this ubuntu thread for context, but i'll sum up what i'm trying to do here to spare the reading. basically i want to be able to schedule a filesystem check with automatic repairs at the next boot time. but i'm not sure if this will try to automatically fix errors which is what i want to do. the reason i want to do this is because i experienced a power outage (the machine was not plugged into an UPS) and i want to make sure everything is ok.
View 2 Replies View RelatedI have a working RHEL in /dev/sda1 and a newly constructed Ubuntu Lucid in /dev/sda2. I'm going to edit the grub config and reboot the server into the new Ubuntu. However, I'm not 100% sure that the new distro can boot. And since my only way to access the server is via SSH, I need the network to be up too.
How can I configure Grub and Ubuntu so that if the server fails to boot, it will automatically reboot into the old RHEL? Currently using GRUB 0.93, but I can upgrade it if needed.
Update: In the end, no boot failure occured. But without the insurance from this, I wouldn't have attempted [URL]..
Slackware 13 didn't install correctly, and I accidentally installed it on my main hard drive on my Toshiba laptop, now it has the MBR all jacked up. I can't boot from CD. If my external usb HD is formatted in a linux format, I have the possibility to boot from that device, but as soon as I load another linux distro, such as ubuntu or pardus, it won't load, and actually disappears from my boot menu. Slackware is dead it runs into a Kernel problem and locks up and then i'm forced to reboot.
View 4 Replies View RelatedA colleague of mine was studying at the University of Vienna and saw an application which was based on linux whereby other pc's booted from it and if on the server they had set it to force a clean install on that PC it would download and install a windows image. Does anyone know of the app or could point me in the direction of a similar app.
View 5 Replies View RelatedI have started to write a SlackBuilds installer, similar in spirit to slackpkg. So far it is only about 100 lines of code and it can search for a package and install it automatically from slackbuilds.org. I doubt it will ever be as polished as slackpkg but it may be useful for some people. Maybe something like this already exists? If it does then I would like to check it out. If however this doesn't exist then I will most likely continue to develop my program. So far it is quite crude but it does install and search for packages.
View 4 Replies View Relatedi do software (learn keyboard) for blind people. I selected ubuntu and festival and TTS. Please i NEED (mandatory for disabled people) live cd what can be inserted into cdrom and everything is done - automatic boot, settings done, software is on start-up... created own distribution, programed software, done settings, but what kills me is : How i can run AUTOMATIC (without asking, no enter) boot from CD-ROOM. Now CD asking :
- 1) What language want you (here is only czech) - need ENTER (killer for disabled people)
- 2) Boot from CD or hdd - need ENTER (killer no. 2 for disabeld people)
- after 2) I m ok, i can handle it myself, works.
I edited file in isolinux menu.lst etc - I can edit text but i do not know how run defalut choice automaticly. timout 0 does not work I spent a lot of hours reading tutorials grub/isolinux and have nothing ...
What I'd like to have is alsa mixer enable microphone on plug-in and mute it on plug-out.
It's because when enabled it produces unwanted noise in the speakers, so I have to manually turn it off once I'm done with using skype and turn on again when I get a call. I'd like to automate that process.
I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View RelatedMy computer(win xp) crashed. When I turn it on I get the flickering line. If I press F2 while the BIOS is loading I can access the BIOS setup, but no operating system will load. I am not very familiar with BIOS. I put a cd in the cd drive that contained the latest download of Ubuntu and told it to reboot. Nothing happened. Setup says my CD-drive is set to a secondary drive. I looked in the CD files and I saw the windows installer (wubi). Is there a way I can boot linux?
View 13 Replies View RelatedUbuntu 9.1 is installed in sda1, however, while creating a separate boot partition an error occurred and now I can not boot sda1. I get the message load kernel first. I have tried without success to learn to load a kernel.
View 5 Replies View RelatedI have installed Linux Mint 9 within Win XP and have installed an additional HDD as a Slave on the same IDE cable as my DVD drive. I installed ubuntu on to the additional HDD using the live CD and when I try to boot the computer I am greeted by two versions of GRUB?! First version appears to be the one that comes with Mint and so asks me to boot either Windows or Mint, when I select Mint I get ubuntu's version of Grub, it asks me to boot one of three OS's; here's where it gets weird:
Top of screen says:
GNU GRUB Version 1.98-1ubuntu5-1mint2
If I select Win, it boots fine. If I select Mint it boots fine however if I select Ubuntu it says:
error: no such device
error: file not found
error: you need to load the kernel first
I pressed "e" within grub and was faced with this:
insmod ntfs
set root ='(hd1,1)'
search --no floppy --fs-uuid --set f6422203421e479
loopback loop0 /linuxmint/disks/root.disk
setroot =(loop0)
linux /boot/vmlinuz-2.6.3-21-generic root =dev/sdb1 loop=/linuxmint/disks/root.disk ro quiet splash
initrd/boot/initrd.img-2.6.32-21-generic
I am trying to load u-boot 1.1.6 in my samsung s3c6410 board. i am getting a error in this process,
s3c6410 # make clean
s3c6410 # make smdk6410_config
Above two command worked fine with out any error.
s3c6410 #make
executing the above command i am getting a lot of errors, such as
start.s:o: error:bad value (armv5t) for -march=switch
interrput.s:o: error:bad value (armv5t) for -march=switch
I am new to the porting, get me out of this problem
Just installed Slackware 13.37 and am trying to get dual boot to work properly. I have edited /etc/lilo.conf to point the Windows section to what I believe should be the correct partition (/dev/sda2) Here is the relevant section
Code:
# LILO configuration file
# Windows bootable partition config begins
other = /dev/sda2
[code]....
I have mounted /dev/sda2 to /ntfs-c as suggested during install and when I browse through there I see the files from my windows setup so it is in fact the correct partition. When I load Windows on boot, however, it is pointing to the recovery partition (/dev/sda1).
I unfortunately remove "some" softwares on my OpenSuse10 (preinstalled on my laptop, without cd driver) cause I was running out of space on hd. Icons starts to dissappear ...
Then I have only the Grub 0.97 shell that appears and to use to solve the problem... tried to boot kernel, but said that it "must be loaded before boot".
In the Grub 0.97 black window I have two lines :
I press "b", to boot with the First line : kernel (hd0,2)/boot/vmlinuz ... but the window turns blue and said "all data would be lost", so it shut down the system automatically to avoid this.
I press "e" to edit the command in the boot sequence for the same line, but don't really know what to tell Grub to do.
I must get my important datas back on my hd before "Restore to factory settings" (the last option). Any solution ?
Maybe it is a step on a solution ?
From [url] I downloaded linux kernel 2.6.27.27 on a usb memory stick. Could it be useful ? how to ?
I've installed Gnewsense on my sda1 and I no longer have the option to load Ubuntu 10.04 on sda2 at boot. As Gnewsense is ext 3 I cannot access my files in my Ubuntu Home dir. Can I simply switch my boot to sda2? It will solve my problem for the medium term.
View 1 Replies View RelatedAfter a kernel update, the system always updates the GRUB menu, and the newer kernel is the default boot option.However, after an update on my F13 X64 system, the GRUB menu was updated, the config file still sets the default to "1" but if i left the automatic boot it will boot the previous kernel... am I crazy or missing something here?Here is my /boot/grub/grub.conf file:
Code:
#boot=/dev/sda
default=1
[code].....
I need to start an application (graphical) when the PC start, even before anybody login, and use/launch a specific user. Now only can do this manually; when gdm starts, switch to any text tty [ie. Ctrl + Alt + F1], then I login into the special user, start a X server, export the DISPLAY environment variable, and start the application.
With this steps:
Code:
$X :1 -verbose -nr -nolisten tcp &
# Maybe Metacity -> $ metacity
$export DISPLAY=:1
$JavaApp &
Now i need put this steps (script) in some place to launch the app automatically, and with and specific user [ie. manager].
How can I made it? Maybe in init.d? or an special xinitrc? And how can start the app with the specific user? And, if is possible, who can stop the app when the system going turn off? I have Debian 5.0 and a beginner knowledge of shell script.
I'm having installation issues with linux. I'm trying to set up a dual boot with vista and linux. I prepared my computer by backing up my files and partitioning my hard drive, leaving 20GB for linux. I downloaded Linux Mint 7, and booted from USB (using the universal USB installer from pendrivelinux.com). All good, entered into linux and installed by following the prompts (selecting use largest unallocated partition to point linux to the partition). At this stage the screen cleared to just leave me with the desktop background.
I patiently waited for it to reboot which never happened. So I waited for 20mins or so, then shut the computer down because I couldn't think of what else to do. When I restarted (without using the livecd/usb) it just went straight to vista. I did a bit of reading and found it might have been something to do with vista taking over grub, and some of the tutorials suggested downloading EasyBCD. So I did that, here's the summary:
Code:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 30 seconds.
Default OS: Linux Mint 7
Entry #1
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Linux Mint 7
BCD ID: {default}
Drive: C:
Bootloader Path: NST
st_grub.mbr
Code:
Windows Boot Manager
identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795}
device partition=C:
description Windows Boot Manager
locale en-US
inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e}
default {bbf9569e-31e5-11df-a844-91f7867d7949}
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
displayorder {3fb6bf63-700d-11db-8409-0016d303c867}
{bbf9569e-31e5-11df-a844-91f7867d7949}
toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d}
timeout 30
Windows Boot Loader
identifier {3fb6bf63-700d-11db-8409-0016d303c867}
device partition=C:
path Windowssystem32winload.exe
description Microsoft Windows Vista
locale en-US
inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7}
recoverysequence {572bcd55-ffa7-11d9-aae2-0007e994107d}
recoveryenabled Yes
osdevice partition=C:
systemroot Windows
resumeobject {3fb6bf64-700d-11db-8409-0016d303c867}
nx OptIn
Real-mode Boot Sector
identifier {bbf9569e-31e5-11df-a844-91f7867d7949}
device partition=C:
path NST
st_grub.mbr
description Linux Mint 7
Now when I turn my computer on, I get options for vista and linux. Vista works fine, but if I select Linux Mint 7 I get an error that reads "cannot load from harddisk, insert systemdisk and press any key".
I have a Realtek WN511b wireless card with a BM4321 chip.
It runs on the wl driver but when I boot the system the card won't install.
With help (I am noob) we have figured out that the ssb and the b43 drivers are installing even though I have them blacklisted. I have seen similar problems described elsewhere but no real fixes.
I can boot the system (Dell d630) then pop the card out and re-insert, enter password and it connects no problem.
It would be nice if it simply installed on boot.
Wondering if anyone had a solution?
When I try to run programs from root terminal I get the error
Code: Select allQDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
No protocol specified
kate: cannot connect to X server :0
I found a solution: I do
Code: Select allxhost SI:localuser:root
but I have to do it after each reboot. I tried to put this command in rc.local but it did'nt work. How to do this auto?
I used LILI to create a live USB key - I believe I used the 686MB version. Everything worked fine. I wanted to try the full DVD install, so I did the same with that image.
Now, it doesn't matter if I load it in virtualbox or if I boot up my comp with the USB stick, I get to the Linux boot menu, choose "Persistent Mode", and then below it shows "Automatic boot in 10 Seconds..."
Once it counts down to 0 it just resets to 10, and keeps on counting!
Ubuntu 10.04 performed an automatic update today which required a reboot afterwards. The reboot took me into a shell "GNU GRUB version 1.98-1ubuntu6", rather than the usual grub boot menu.
View 2 Replies View RelatedI have just installed Centos 5, and created two user account in it. how can i set it up that it will automaticaly boot to one of the user acount upon bootup?
View 2 Replies View RelatedI'm using Ubuntu Lucid and any sudden power loss will usually cause problems with the file system. When I bring the computer back up, Ubuntu will then scan for errors at boot-time and if any errors are found it prompts me to select whether to repair or ignore them. I would much rather have it select the repair option automatically so that I don't have to be physically present.The reason for this is that i have a web server that should come back online automatically after a power loss.
View 2 Replies View Relatedconnect to the Internet through my newly bought USB adapter, and it works just fine now... But - after boot I can't connect to the Internet before i open a terminal and type
either: sudo modprobe ndiswrapper - from the ndiswrapper-1.56 folder
or: sudo iwlist wlan0 scan - from the root
Both commands are some I learned during installation of the USB device - I don't know if any other commands would work;
It would be nice if my device connected automatically - is this possible?