Ubuntu 10.04 performed an automatic update today which required a reboot afterwards. The reboot took me into a shell "GNU GRUB version 1.98-1ubuntu6", rather than the usual grub boot menu.
View 2 RepliesFor the past few days, the automatic GUI update has been crashing, complaining of a "Transaction error."
Here is the output that pops up in a separate window:
Code:
I tried the following:
Code:
And got the following (similar) output:
Code:
I very rarely use xfce and I don't quite know what exo is, but I'd like to fix this problem if it's not too involved.
I have 10.04 installed on my daughters Laptop. After running an update manager session, the system asked for a restart. After restarting the Laptop won't boot up. Get a black screen scrolling with lots of hex addresses then 3 unable to mount messages ( mounting to /dev /sys /prod ) then a no init found message, followed by entering a busybox shell session which leaves me at initramfs: I'm a newbie at this linux shell stuff and don't want to make it any worse by scrabbling along blindly! System is a dell Inspiron 1501, Ubuntu is installed on a clean formatted single partition.
View 2 Replies View Relatedtoday when i updated my ubuntu 9.10 it was about 44mb update and update manager was not able to download 13mb of files i clicked continue anyway. after that i shut down my pc and when i restarted it my old black and ordinary GRUB was gone and there was one with Debian symbol and blue background and everything and when i selected any OS ( i have 3 os 1 on my 80GB hard disk which is ubuntu and other 2 are debian and windows XP which are on 20GB hard disk) and it said
invalid character '+' file not found.
so i am now running on live cd.
Just did an update to 9.1 & now am unable to boot to ubuntu, windows7 still boots ok. Didnt pay much attention to the update but did notice there were a lot of cups files. Booting to ubuntu get something about using a tab & then getting a list of commands one can do. Tried boot got 'no kernel' tried exit & got a pc reboot which let me back to the tab msg.
View 2 Replies View RelatedThis morning, I booted into my administrator account and checked for updates. There were a number (bogofilter, for one) but also a update to the 2.6.32-24 kernel. I installed the updates and rebooted the system. When I rebooted, the thought occurred to me (from reading another thread) that one of the reasons my Zareason desktop boots slower than my laptop (55 seconds vs 35) was that I have an external floppy drive attached, and perhaps the delay was a difference in my system checking for a bootable floppy.
So I went into the BIOS when it was booting to check to see if the floppy was enabled (it wasn't). Then I selected "Exit without saving" and resumed booting. What happened next was instead of seeing the Ubuntu icon and the six dots, I see "Ubuntu 10.04" and four dots. Then I get on the black screen these errors (sorry for any mistyping, I wrote them down on a sheet of paper as I had no other computer available to troubleshoot):
udevadm trigger is not permitted while udev is unconfigured
udevadm settle is not permitted while udev is unconfigured
udevadm settle is not permitted while udev is unconfigured
udevadm settle is not permitted while udev is unconfigured
ALERT! /dev/disk/by-uiid/939af864-c1a8-41d7-9b24-91d25685b6 does not exist. Dropping to shell
Busybox v1.13.3 (Ubuntu 1:1.13:3-1ubuntu11 built-in shell (ash).
Enter 'help' for built-in commands
initramfs
Googling around once I got into work and had computer access, it seems that the problem is GRUB has lost track of what partition I should boot from? Here is a thread which might be relevant: [URL]. Before I left for work, I went into the BIOS again and looked at the CMOS settings--everything looked normal. I once again exited without saving anything. I was going to try selecting an earlier kernel from the GRUB menu on boot, but couldn't remember the key to press.
I found out later today, to enter GRUB 2 it's been changed to the shift key, and not the F2 key like it used to be. One poster on the aforementioned thread said his system would boot ok to the earlier kernel. The thread above has as its solution to either try to tell GRUB where your boot partition is and/or re-installing GRUB. I have /home on a separate partition, so if I need to do a re-install I can do so without it being a major pain. Sda1 is the partition which has the OS.
I've been running ubuntu on multiple computers for about 8 months now, installed on one computer as it's only OS (XP ran too slowly), and as a side OS for two others, one running XP and one running 7.The problem is, Ubuntu recently stopped booting on my Windows 7 computer. The option shows at start-up, but when I select it, the computer restarts back to the boot menu. I had recently installed an update from Update Manager that required a Restart, so when I restarted it to finish installing I left it to have dinner and it restarted into windows.About a day later, I wanted to boot ubuntu again, but my computer simply restarted, and has been doing this since (it's been about 3 days). I'm not sure if this has anything to do with it, but the last thing I installed before the update was a 1st person shooter game, I can't remember the name, but the icon was a "ka" symbol in katakana.
View 3 Replies View RelatedI have installed kubuntu 9.10 inside windows Xp and I installed ubuntu-desktop to get both gnome and kde .I upgraded to 10.4 from gnome and I updated it.no problem. Then I updated the kubuntu and restarted the system, I am unable to boot ubuntu or kubuntu but still i am able to boot windows Xp.
View 8 Replies View RelatedI'm a linux newbie so be gentle please. I'm on Lucid Lynx. Last night, the update manager installed updates to the linux kernel header. I'm not exactly sure what that means but it was one of the more important updates as it required a reboot.
This morning, my machine would not boot. After getting past the loading screen, my laptop hangs on a black screen. It was working flawlessly before yesterday. I can boot into recovery mode which appears identical to the regular mode, which works fine and is what I've been using. Also, I used a custom bootscreen, but it seems to have reverted to the default one that comes with the Lucid Lynx install.
This morning my update manager came up so I clicked to update. About halfway through the update an error message popped up & said to restart my system. I restarted my system and now have a black screen with the following message:
mountall: symbol lookup error: mountall: undefined symbol: udev_monitor_filter_a
dd_match_subsystem_devtype
init: mountall main process (344) terminated with status 127
I read around earlier & tried to use a Ubuntu disk and reboot but I have the same error.
I'm using a Dell Inspiron computer, it's just over a year old. I keep up with all the updates but unfortunately cannot say for sure which updates were taking place because I just hit the update box.
I am new to linux but have install fedora 14 twice on my computer now and about to go for three. The first time I installed it, ran the updates using yum update, downloaded and installed wireless driver b43 then tried to change boot order to boot to win 7 first and thought I messed it up when I did that. It took over 20 minutes just to boot up and log in and about 10 minutes just to open a terminal window. So re-installed it had a friend who is very good with fedora change the boot order, then did the yum updates and wireless driver install again today. Now when I reboot my computer it no longer automatically boots to windows, and does not even give me the option to boot to fedora.
I believe it's the grub menu but the boot menu that I used to get if i wanted to change the boot to fedora is now a different color (white & black) and doesn't list the option to boot to fedora. Currently I do not have the DVD I used to install and was hoping there was a way to fix it without re-installing it. The boot menu does give me the options of hitting 'e' to edit something or 'a' to edit the kernel arguments, and I have no idea what either of them are. But the 'a' does not do anything, 'e' brings me to another menu option with chainloader and rvnotify or something similar. And there are more buttons to edit stuff and 'b' to boot from the choices but they both boot to win 7 not fedora.
I have Ubuntu Lucid and am wondering how to have the wallpapers in the Background tab of the Appearances dialog box update automatically when I add a wallpaper to /usr/share/backgrounds. Or should I be putting them somewhere else for this to happen? I have several accounts on my computer and can't go into each account and manually update whenever I add a wallpaper
View 3 Replies View RelatedI've been using Lubuntu for the last 4-5 months as a virtual web server, for developing Joomla sites. I have been extremely happy with it so far. (Runs with ~300MB memory just fine)A few days ago I installed some updates and the next time I rebooted the login screen was different and I couldn't log in to the graphical environment any more.I hit Ctrl+Alt+F2 I can log in to the console bu
View 3 Replies View RelatedAfter running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies View RelatedI had a Centos 5.5 system working great...and then due to crazy curiosity, installed the kernel update. Did this through the graphical interface, uncheck all update other than kernel. It downloaded, installed fine..After reboot now all I get is GRUB_ and then nothing else! I waited 3-4 minutes and had to shut down system. Have been googling around but thought I will post it here as well..When I boot with Win7 and use Ext2fsd to check, the boot folder is empty. Not sure if this is because ext2fsd does not read boot folder or it got wiped out by the yum upgrade process.
View 9 Replies View RelatedI have recently run an update and now we are unable to boot the newer kernel. We get stuck as below;
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
Red Hat nash version 5.1.19.6 starting
Unable to access resume device (/dev/VolGroup00/LogVol06)
[Code]...
The kernel version we were at was 2.6.18-194.el5 and the update move us to 2.6.18-194.17.1.el5. I've done some googleing but I'm unable to work out exactly what I need to do. I'm guessing the new kernal is missing a module?
i do software (learn keyboard) for blind people. I selected ubuntu and festival and TTS. Please i NEED (mandatory for disabled people) live cd what can be inserted into cdrom and everything is done - automatic boot, settings done, software is on start-up... created own distribution, programed software, done settings, but what kills me is : How i can run AUTOMATIC (without asking, no enter) boot from CD-ROOM. Now CD asking :
- 1) What language want you (here is only czech) - need ENTER (killer for disabled people)
- 2) Boot from CD or hdd - need ENTER (killer no. 2 for disabeld people)
- after 2) I m ok, i can handle it myself, works.
I edited file in isolinux menu.lst etc - I can edit text but i do not know how run defalut choice automaticly. timout 0 does not work I spent a lot of hours reading tutorials grub/isolinux and have nothing ...
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
I have a kind o Kubuntu-Studio 9.10
I installed from Ubuntu Karmic minimal, so i did install KDE.
i have update-manager-kde, update-notifier-kde and kpackage kit installed. for manual installing i use synaptic though.
in the repositry-manager the automatic updates are anabled (daily).
but it is not checking for updates. i checked manually in synaptic, and there are updates available.
so, how do i let it check automaticly for updates?
can someone please confirm or correct my understanding of automatic upgrades in F14:as far as i currently understand the automatic update mechanism in F14 it works the following way:
1.) PackageKit (packagekitd) periodically checks for updates using YUM as it's backend and displays a nice icon in the tray to inform the user when upgrades are available.
2.) PackageKit (packagekitd) only runs when a user needs it and terminates afterward. When a interactive Desktop session is running, packagekitd is always running because it's spawned by the session manager.
3.) When using a console only system (without X) or when nobody is logging in on the local graphical console for a longer time i need yum-checkupdates for configuring automatic upgrades (same as done per default in CentOS).
YaST2 now does not have an "Online Update Configuration" anymore.Where are we supposed to setup automatic update installation? In Gnome there is an item for this in the Gnome Update Applet, but there is nothing equivalent in the KDE Updater Applet.
View 9 Replies View RelatedAfter the latest update of Debian Wheezy, about three days ago, one of my machines won't boot anymore. The update was done by:
Code: Select all/usr/sbin/update-smart-drivedb
apt-get update
apt-get -y upgrade
apt-get -y autoremove
I get the error message: "Alert! /dev/disk/by-uuid/71c... does not exist. Dropping to a shell!"
The dir /dev/disk contains only "by-id" and "by-path".
I booted with the rescue system, dropped into a shell and recreated the ramdisk with
Code: Select alldpkg-reconfigure linux-image-3.2.0-4-amd64
dpkg-reconfigure grub-pc
But without success. On another machine the update went flawlessly.
I've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies View RelatedI am using Ubuntu 8.04. Most of my Administration functions have stopped working. If I click on Hardware Drivers, Hardware Testing, Log In Window, Software Sources, Synaptic Package Manager, and Windows Wireless Drivers my pointer turns into the timer wheel, so I know it is working, but then it just disappears and nothing happens. When I click on Update Manager my computer freezes. If I try to update through the red Updates Available arrow at the top of my screen my computer freezes. I can update through terminal but the red arrow never goes away. I also have 17 updates that won't update. I have tried them one at a time through terminal but they just freeze the computer. The only way to unfreeze it is to shut the computer down.
View 4 Replies View RelatedI've just installed debian sid and see that I've the kernel 2.6.32. I was a bit surprise as on ubuntu I had the 2.6.35 and debian sid is supposed to be more up to date that ubuntu (maybe I'm wrong).So I checked what were the packages available :
mart@mart-laptop:~$ uname -a
Linux mart-laptop 2.6.32-5-686-bigmem #1 SMP Sat Oct 30 23:25:58 UTC 2010 i686 GNU/Linux
mart@mart-laptop:~$ sudo aptitude search ^linux-image
[code]...
So, I logged into my laptop this morning and tried to run a VirtualBox VM and it barked that I had not setup the kernel module yet. I found this odd since I was running it fine yesterday... so I was poking around my system and noticed that there was a yum update yesterday
Code:
Jun 07 14:03:21 Updated: 1:gdm-3.0.4-1.fc15.x86_64
Jun 07 14:03:22 Updated: 1:gdm-plugin-fingerprint-3.0.4-1.fc15.x86_64
Jun 07 14:03:35 Installed: kernel-debug-devel-2.6.38.7-30.fc15.x86_64
Jun 07 14:03:37 Updated: kernel-headers-2.6.38.7-30.fc15.x86_64
[Code]......
I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies View RelatedI enabled Automatic Online Updates in opensuse 11.2, and set the frequency to "Daily", but after 24 hours I haven't seen an update. It may be because I had YaST still running and maybe the installed software database was locked.At any rate,ow can I verify that Automatic Online Updates are scheduled?
View 4 Replies View Relatedi have recently configured squid with dansguardian. Squid was running on a whitelist mode, meaning i deny every single traffic, and allow traffic that matches with what i allow only.
this however, introduced a problem where i have to manually update the list of sites allowed for kids, which is not efficient. is there any websites where i can use' wget' to download recommended websites for kids, and plug it into the list of allowed websites.
or I'm thinking that maybe if there's some way to write a script where it will automatically add the search results to the list, from reliable search engines like www.kidrex.org.
I should have know, it's named after a windows "feature".On my laptop (Acer Aspire 5310) Fedora 10 offered me an automatic update to Fedora 11. Because I trust any automatic update Fedora brings to me (it's tested right) I automatically pressed yes. It started some downloads and everything seems to run pretty smooth. Then I had to reboot the computer, press that button as well.... and it reboots into Fedora 10 (untill the end of the bar). After that I have no clue what happens, because before X is started I get a black screen with nothing on it, even ESC doesn't do anything :O I don't even get the "_" to indicate the laptop is doing anything.
View 3 Replies View Related