Ubuntu Networking :: Automatic Connection To Internet After Boot?
Aug 15, 2011
connect to the Internet through my newly bought USB adapter, and it works just fine now... But - after boot I can't connect to the Internet before i open a terminal and type
either: sudo modprobe ndiswrapper - from the ndiswrapper-1.56 folder
or: sudo iwlist wlan0 scan - from the root
Both commands are some I learned during installation of the USB device - I don't know if any other commands would work;
It would be nice if my device connected automatically - is this possible?
View 2 Replies
ADVERTISEMENT
Oct 16, 2010
I can connect to the internet on Win7 without issue. Boot to Ubuntu 10.10 amd64 & it works sometimes & sometimes it doesn't.
I've attached 4 screen photos; 2 when internet is working (Working ifcomfig & Working route -n) & 2 when internet is NOT-working (NonWorking ifcomfig & NonWorking route -n).
The 1st I notice when looking @ working ifconfig is line 3 under eth0, inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0, is missing on NonWorking ifconfig.
View 2 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Jan 4, 2010
I'm new to Ubuntu so bear with me. I installed 9.10 from a CD and it looks fine and works OK wired. However, my wireless keeps picking up a connection at home via my Linksys router that is not mine and I can't get around it, blacklist it or delete it. No matter what I do it keeps showing back up as an AutoConnection. It is the same type of router as mine but the security is different (I use WPA-Personal and the offender is WEP). How can I permanently blockdisableetc the extra connection? I can't get on my home network until the bad autoconnection is gone. More info: I use an IBM R40 into which I installed a Toshiba mini-PC wireless card. I know it works as I have used it to connect to other wireless networks other than my own. I prefer to leave my router configured as it is due to other users at home and the configs I use for them. I read about WICD if that is a possibility, but actually connecting wirelessly is not the issue.
View 4 Replies
View Related
Apr 14, 2010
I accidentally clicked a secured wireless which I do not have password. Now every time I open Ubuntu, a window pops up asking for password for the wireless. I am wondering how to turn if off.
View 1 Replies
View Related
Sep 5, 2010
I'm working in France right now. And my internet access is through a router on a local network (LAN) of the hotel in which I stay. In order to have internet access I must type in my room number, my name, check the agreement and then click Enter.The problem is that the router cuts off internet every two hours.What I need is some script that does the followings:
- detect if there is no more internet connection (the LAN connection stays on)
- if there isn't to run the script that does all those things above.
What I've managed to do is the script that puts room number, name, check the agreement and click Enter using DejaClick, making it a bookmark and then open the firefox and run the script.The command that I've used in Terminal and which I think I can use in my script was:
[URL]
It works well. It's connecting to the net.What remains is the detection of the cut off of the internet connection.
Tried with Wicd, going to the properties of the wireless connection and then on Script. here I'm stucked.Don't know what to do anymore.It has the post-disconnection script option, but my LAN connection is not disconnecting, only the Internet access through this LAN is disconnecting.
View 1 Replies
View Related
Sep 10, 2010
After running a large update and rebooting a few weeks ago, I found that my internet connection had stopped working. My internal network still worked fine though, so it I know it's not the card itself or its configuration. After a bit of trial and error I discovered that simply running dhclient brings the connection up again, so it appears that something is interfering with the initial dhcp update to my ISP (or something like that; I'm no expert in this area. ) My usual policy in cases like this is to wait through two or three updates in the hopes that it's just a temporary problem, but it's been a while now and subsequent updates haven't fixed it.
I've tried looking around, but I can't come up with search criteria specific enough to narrow it down to my specific situation. I'm not even sure where to begin looking to diagnose the problem, nor do I know which package update(s) could've affected it. I'm not sure what might be useful, but here's the relevant entry in /etc/network/interfaces. I have it configured with a static internal address, with my router as the gateway.
Code:
# The primary network interface
mapping eth0
script grep
map eth0
[code].....
View 7 Replies
View Related
May 26, 2009
My computer takes a while to connect to my Linksys N router.
It used to connect in a snap of your finger automatically.
Now it does not.
Yes I have tried manual configuration, and double checking the password, ssid, protocols, and security type.
WPA2 personal is the security type.
There are maybe 4 different ways I know how to connect. The most annoying thing is when this box pops up saying to type in a password for the network connection.. and keeps popping up even when everything is right.
All I need is a reliable, easy, and automatic program to connect me to the internet, maybe even before I log into my system.
Linux Ubuntu 8.04 LTS Desktop Edition is my system. Brilliant system.
View 4 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related
May 1, 2011
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
May 9, 2011
I've installed Debian squeeze using the net installer and while beginning the installation I loaded the 'ppp-udeb' module to connect to the internet for accessing the Debian mirrors during the installation. Now, whenever I boot into Debian, internet connection kicks in automatically. I would want to have control over when to start the internet connection. I don't want it to be triggered during my login.
View 2 Replies
View Related
Dec 14, 2010
I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
View 7 Replies
View Related
Jul 8, 2010
I'm using ubuntu 10.04 dual boot with windows xp. Recently I'm having problems using the internet, I can connect to our wireless network but can't use the internet, firefox just says error on opening the page. But when im in windows xp i can surf and use the net. Is their a way to diagnose whats causing the problem. I use a Realtek RTL8187 wireless lan, it works fine before its just now that its not working with ubuntu.
View 4 Replies
View Related
Jan 11, 2011
I installed ubuntu 10.10 with windows 7 (dual boot) in my fujitsu lifebook. I use zoom ultra by Sentar EVDO MODEM ST880U. I tried pppoeconf or DSL or mobile broadband but fail to connecte internet. In first exprience on ubuntu 9.04 same via dell latitude with Huawei EC123 Data card.Any one can assist me to overcome the bad condition to like ubuntu as on offline mood in my work zone.Actually i used ubuntu 9.04 for my offline work in Dell. Now also same condition starts. Please help to come internet and enjoy ubuntu.
View 2 Replies
View Related
Jun 17, 2011
OS is Ubuntu 10.04. I have HomePNA-connection which is converted to Ethernet by Netsys NH-300 HomePNA-Ethernet adapter.
The problems that I have: Sometimes when I boot I don't get IP from DHCP. If try to ping any address I am told that host is unreachable. Sometimes this I can get IP by using command dhlient -r and dhclient to request new ip. Sometimes only way to get my connection to work is booting the computer.
Sometimes the connection works fine from the start but disconnects later for short time. Sometimes this happens every ten minutes, sometimes less often. If I wait for a while the connection might start working again, if not dhclient -r or reboot helps usually. But not always.
View 7 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
Jan 18, 2010
I installed Ubuntu 9.10 using the default setup (Gnome I think) and on my Gateway Notebook using a wireless connection. It appears to be working great and I can even see my Windows drives and network storage on my home office systems.I have also set it up to run my favorite Bible software on Windows running under VirtualBox. I then installed the KDE Desktop so that I can select either desktop when logging on.
However, once I am in the KDE desktop, I cannot connect to the internet. I have checked and double-checked and the wireless settings seem to be the same on both the Gnom and KDE Desktops but still no network or internet connection when using KDE. I might mention that I am using the 64 Bit version of Ubuntu.
View 2 Replies
View Related
Feb 5, 2010
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
View 7 Replies
View Related
Apr 3, 2010
I have an EMachine T3095 with xp home os and ubuntu os. I install ubuntu in windows. In windows I don't load internet software, yet surfing the web fine in both os. Recently did complete re-installation of windows and ubuntu os, for got 3 trojan viruses on windows. Now can't get on the internet in windows. Emachine said I need to get motherboard downloaded to get LAN, which is not on windows software. Isn't the same motherboard used by ubuntu to get on the internet? Obviously some software has been corrupted? Which software could be the problem. Is there a link to download it?
View 2 Replies
View Related
May 6, 2010
I have a system with windows xp, and to connect to internet I use a usb card EVDO (brand ZTE) given by my provider (BSNL India).Now I installed ubuntu 10:04 but I do not know how to make my usb card work to connect to internet (the provider gave the software only for win xp)
View 9 Replies
View Related
May 20, 2010
I'm using 10.04 I tried to connect to a free WiFi connection. I had the password for it too. I had been able to access the connection 2 weeks ago with no real trouble. Now, the thing at the top of my screen indicates I'm connected BUT I can't get Firefox to access any sites. I can't download email using Thunderbird. Pretty strange isn't it?
View 8 Replies
View Related
May 29, 2010
I tough that firefox was the problem of my very slow web sites loading, but I am suspecting that sometimes the internet connection is the reason, maybe for some reason that I don't know it can not just connect to the site.I am running Linux quick-desktop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux.when I browse the web it is very slow to load.sometimes I get this error message.Could not locate remote server.Even I know the site is up running like google.
View 6 Replies
View Related
Jun 1, 2010
When I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies
View Related
Jul 10, 2010
I'm trying to connect two PCs to the Internet (or at least to create a local network) using a crossover cable. My main PC (the one that has two ethernet adapters and is connected to the Internet) runs Windows 7 and my secondary PC runs Ubuntu 10.04.Unfortunately, it doesn't work. Both systems send out packages but don't receive anything. How can I possibly fix this, so that I could use LAN and share the Internet connection between PCs? Does Windows need special software to recognize Ubuntu (or the other way around)?
View 1 Replies
View Related
