A colleague of mine was studying at the University of Vienna and saw an application which was based on linux whereby other pc's booted from it and if on the server they had set it to force a clean install on that PC it would download and install a windows image. Does anyone know of the app or could point me in the direction of a similar app.
View 5 RepliesI installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View RelatedJust installed Slackware 13.37 and am trying to get dual boot to work properly. I have edited /etc/lilo.conf to point the Windows section to what I believe should be the correct partition (/dev/sda2) Here is the relevant section
Code:
# LILO configuration file
# Windows bootable partition config begins
other = /dev/sda2
[code]....
I have mounted /dev/sda2 to /ntfs-c as suggested during install and when I browse through there I see the files from my windows setup so it is in fact the correct partition. When I load Windows on boot, however, it is pointing to the recovery partition (/dev/sda1).
I am writing one simple server daemon and running with /etc/init.d/server its running properly but when i want to run one simple QT GUI with system() function , its not able to run it and returning 256 as return code .
If same daemon i m running from terminal then its working properly and also system() function is getting success with return value 0 and GUI is getting popped up.
I need to start an application (graphical) when the PC start, even before anybody login, and use/launch a specific user. Now only can do this manually; when gdm starts, switch to any text tty [ie. Ctrl + Alt + F1], then I login into the special user, start a X server, export the DISPLAY environment variable, and start the application.
With this steps:
Code:
$X :1 -verbose -nr -nolisten tcp &
# Maybe Metacity -> $ metacity
$export DISPLAY=:1
$JavaApp &
Now i need put this steps (script) in some place to launch the app automatically, and with and specific user [ie. manager].
How can I made it? Maybe in init.d? or an special xinitrc? And how can start the app with the specific user? And, if is possible, who can stop the app when the system going turn off? I have Debian 5.0 and a beginner knowledge of shell script.
i have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
I have installed freeswitch app from opensuse 11.2 repositories. App got broken during the process/setup.., I have removed it (yast) ignoring some of it's dependencies, also I have removed folder /opt/freeswitch manually. In Yast it shows that app is still installed.. when trying to remove it, there is an error, force remove also out puts an error. "whereis" command shows no file, I was also trying to force install it one more time but it fails. Is there a was to delete it permanently?
View 3 Replies View RelatedI have made a set of ISO CDs for Fedora 11. I put in the first one (disc1 not the Live CS) and boot the system. This is fine. I choose "Install or upgrade an existing system". It is a fresh system not an upgrade. The installation proceeds - but it starts to download everything from the network, not from the CDs. How do I prevent this and force it to load from the CDs?
View 2 Replies View RelatedI have Mandrake 7.1 installed on a laptop and I have several problems that an upgrade would likely fix or provide a path that will support a fix. The Mousepad is irratic and the PCMCIA WiFi and Ethernet cards are not recognized. What's a good way to upgrade? (I can access the network from an external modem and from a dual-boot Windows 98 WiFi)
View 7 Replies View RelatedDuring startup (suse linux old distro) LILO immediately after stratup procedure I can see login for about 1 sec and then Xserver starts. I'm unable to kill it with Ctrl+Alt+Backspace or Ctrl+F1..So the question is: is there any way I can force linux to boot into console mode before it starts xserver? (I'm unable to modify any files since I cannot reach the consol mode)?Is there any shortcut ky I need to press during boot in order to prevent GUI from starting?
View 5 Replies View RelatedI managed somehow to successfully install a dual boot with Ubuntu 9.02 and Windows XP. Ubuntu was on a PATA drive and the WinXP was on a SATA drive. The SATA drive was configured to boot first. As I was having problems with Ubuntu I booted into WinXP, re-formatted the PATA drive, then restarted the computer and installed Ubuntu 9.10. It all went well.I rebooted the machine and the following message was on the screen:
GRUB Loading stage1.5.GRUB Loading, please wait....Error 17
I rebooted, changed the boot order so that the PATA disk (Ubuntu) started first, then the SATA(WinXP). Ubuntu loaded up the dual boot screen.I chose WINXP, but I was greeted with a black screen.I rebooted again and chose to load Ubuntu, which it did without a hitch.what I should do to restore my access to WinXP? Or should I start again? If so, how?
I installed ubuntu 10.04, aftert that i cluld not able to start windows xp,Please find the details about my hard disk
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I installed Ubuntu 11.04 on a separate partition, with Grub being in it own partition. When I start the PC only windows Xp is available. So how do I get grub or Ubuntu load with windows xp boot loader? I tried with Live cd, the sudo grub but then it says command not found. I think its because Ubuntu 11.04 uses grub 2.
View 1 Replies View RelatedFirst, let me start off by saying that for the past 5-6 months I've been using Linux stand-alone without Windows at all. Recently though, I got netflix and found that there is no support for Linux distros. So, begrudgingly, I installed a small Windows Partition on my computer. So here's the problem: I can't boot back into Ubuntu. Whenever I turn on my computer, it automatically boots up into Windows 7. I know my Ubuntu partition is still there, because when I boot from my live disc I can see it. Is there a way I can fix this using Windows and/or a live disc?
View 5 Replies View RelatedI am new to opensuse, having migrated from Ubuntu. I have had some difficulty with power management on Ubuntu so i decided to install opensuse with kde as i heard it was good for laptops. I have had lots of trouble getting opensuse 11.4 to boot properly and to run without freezing.
I have trawled the forums and bugzilla and the documentation, e.g. SDB:ATI - openSUSE and SDB:Configuring graphics cards - openSUSE. Consequently i am now able to boot (normally), however whenever i open any application, e.g. Dolphin file manager, Firefox, etc, the tab starts to load (little circle starts spinning on the tab), and then it freezes.
At this point I can exit X Windows and enter the text mode. I have repeated this with the FGLRX and Radeon drivers running. This is always repeatable. I can also boot into level 3 and do things there.
My computer details are:
HP Pavilion dv6 3032TX
Processor - Intel i7 720 QM
Ram - 6GB
GPU - ATI Mobility Radeon 5650
Harddrive - 640GB 5400rpm
[Code]...
What i have tried so far:
1. First 4 steps on SDB:Configuring graphics cards - openSUSE
2. Install and run FGLRX
Note that i cannot failsafe boot - it never boots into X Windows and just hangs. I really do like the look and feel of opensuse and would love to use it, but at this point my only option is to try another distro.
install on my machine with windows xp an Ubuntu 10.10 server without losing windows xp..I can't find some step-by-step procedure on how to set up a dual boot
View 10 Replies View RelatedMy Suse server is failing to boot and it is giving the following error:
Mellanox ConnectX Boot over IB v1.9.972
gPXE 0.9.6+ -- Open Source Boot Firmware -- [URL]
No more network devices
I have two network interfaces
Infiniband network and the Ethernet network.
It is a x6275 Sun server.
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedA few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
I am unable to load Ubuntu onto computer as dual boot or inside windows. Thus scanned the CD and found it has 23 errors.Are these files suppose to be on the CD?casper, .disk, install, install, isolinux, pics, pool, pressed, autorun, md5sum.
View 4 Replies View RelatedI let a 'friend' use my laptop over the weekend. Now when I turn it on, it loads the BIOS details, then says no active partition, then no OS cannot be found.
It looks like they have deleted the partition with SuSE with the Grub Loader.
I cannot load up SuSE or Windows 7!
Any ideas on how to recover the boot to load Windows 7?
I have tried using the Windows 7 install disc to repair - but it does not recognise that Windows is installed and wants to do a clean install only.
Is it worth trying to reinstall SuSE and hope it detects Windows on the other partition? (I assume it is still there!)
I cannot get to a command prompt.
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I am writing one simple server daemon and running with /etc/init.d/server its running properly but when i want to run one simple QT GUI with system() function , its not able to run it and returning 256 as return code .
if same daemon i m running from terminal then its working properly and also system() function is getting success with return value 0 and GUI is getting popped up.
i m using ubuntu-9.10 below is the code ....
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netinet/in.h>
[Code].....
Have been running ubuntu for sometime now and love its functionality...However since a recent update have the following issues..When I power on the laptop I get the toshiba logo followed by grub loading with the message ' invalid enviroment block" "unable to load default boot entries". When I then try to run the laptop off a LiveCd, the ubuntu splash screen appears with the loading process bar (horizontal line) displayed..however it then appears to display a black screen with no further activity..Now all of this is via an external monitor as my laptop screen shows no activity right from the very start with just a blank screen....so am really stuck here wondering if its a harware/software issue or a combination of both...
View 1 Replies View RelatedI am trying to setup a ventrilo server. I want it to load the server automatically on system boot so it is running at all times. I have downloaded the server files and can manually start it, but I do not know where/how to make it start automatically.
View 1 Replies View RelatedI'm trying to run a Linux application and all I want to run is this one application off of boot. I need networking and that's all (no display, peripherals, etc.). I want no other applications running so that the application I run has 100% of the CPU. Is this possible?
View 4 Replies View RelatedI have Ubuntu 10.10 installed on my pc with XBMC installed. It's set to boot into xbmc on start up and works fine. I also have squeezebox server (a music server for my network) installed and again don't have any trouble. I'd now like to get squeezeslave running, a client for squeezebox server so I added the following lines to /etc/init.d/local:
#!/bin/sh
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin
squeezeslave -o0 -r3 192.168.1.3 &
exit 0
This fails to start the client on boot, however if I ssh into the machine and run /etc/init.d/local it runs fine.
I have a loadable module, simple enough I believe it should run on any 2.6 kernel. I want to force the load and test that assumption. How can I do it?
ismod does not seem to notice the -f in 2.7 modprobe has -f but cannot locate the module.No go. So I read the manpage for modprobe which says: modprobe looks in the module directory /lib/modules/'uname -r'.So I copied MYMODULE.ko to /lib/modules/2.6.(the only directory in here) and type: modprobe -f MYMODULE.ko.Still can't locate MYMODULE.ko.I notice there are no other .ko modules in that directory; so I go in deeper to kernel/drivers/char, guessing about the char directory, and copy MYMODULE.ko there.
I have a need to run a specific app as a specific user when the machine boots into init 3. I can not run this as root so I need to specify a user. Can someone tell me how to accomplish this?I usually have to log in and start this application by typing check -D which starts this app and daemonizes it. I want to be able to run that at boot with my normal user not root.I hope I explained this correctly.I have added it to rc.local but it runs as root.
View 3 Replies View Related