I'm trying to set up a test system for Windows 7. I've been having trouble getting it to map drives on the domain where I work, so I wanted to set up a test system with a similar setup so I can play around with settings without mucking up our network. Only problem is I can't get it configured to even work with XP, which does work on our domain.
When I type \server in the Run box I get the explorer window showing all of the test shares I've set up. But when I try to access them, it says the network path could not be found. Here is my smb.conf file:
[global]
workgroup = MAJOR
netbios name = VPN
realm = MAJOR.COM
I installed Samba on CentOS, create a principal share called "public" . I want to populate this share with subfolders, and to grant access rights to specific folders for specific users. The content of "public" will be visible for all Samba users, but they will have read/write access only to the specified subfolders based on my security policy. I need the best way for doing this kind of stuff...
I can't be the first one with this problem. What am I missing?
I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.
---- Environment summary: Clean server install of CentOS 5.4 includes SELinux - lets call this 'server' - updated samba to 3.0.33-3.15.el5_4.1
Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above Client2 - Windows Vista - WINS configuration uses 'server' noted above
---- What works / what doesn't ------ Clients can see the server (XP and vista) in network neighborhood. The following does not work from windows (xp or vista) net view net view \server net view \server-ip net view \servershare
This does work on the server smbclient -L \server smbclient -L \server --user validuser smbclient -L \client1 --user validuser
---- What I have configured and tried (config/output below) -------- firewall ports for samba are open SELinux enforcing or permissive file context is set on share samba booleans are set
***firewall -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT
***SELinux mode/booleans # sestatus SELinux status: enabled SELinuxfs mount: /selinux Current mode: permissive Mode from config file: enforcing Policy version: 21 Policy from config file: targeted
# getsebool -a | grep smb allow_smbd_anon_write --> off smbd_disable_trans --> on
# getsebool -a | grep samba samba_domain_controller --> on samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off
i did install and configure samba buy google tutorials. I can ping the centos box from windows but cannt access folder which is on centos. I can ping the machine.
cannot restrict share access to a single user. I've played with the security and valid users options in the smb.conf and I can get it to mount if I remove the valid users option, but this does not provide the access restriction I need. I also left it open and tried making the folder permissions rwx for backupadmin only and that didn't work. I'm using a credentials file which I include below, but I've tried manually entering them in the command too.
[root@aaphst02 /]# mount -t cifs //aapsan01/aapxen01 /mnt/aapxen01 --verbose -o credentials=/root/smbcreds mount.cifs kernel mount options: unc=//aapsan01aapxen01,ip=10.0.1.34,user=backupadmin,ver=1,rw,credentials=/root/smbcreds,pass=********
This is my first post. I am not all that new to Linux. I have done lots of reading on the OS but always felt a little timid when it came to trying out stuff.Here is my problem I have a stand alone samba server I am trying to setup to share all my digital photos and other doc. I can see the share from other machines. On the windows machines you can see the users home directory and the share itself in an folder icon. Whenever I try to access the share it asks for a passwd. I enter the passwd and the share folder is visible when I click on the folder I get and error message.
I am using samba t share my files.I am sharing /media/MEDIA folder. it is a ntfs partition mounted with ntfs-3g with write/read access from linux.I can see and browse my shares and also create files in the root of this partition, ie /media/MEDIA, but in its subfolders i do not have write permissions.
another interesting thing is that i have permission to create directory and delete files everywhere and in any folder, subfolder but when trying to create files i get not enough free disk space error.by the way i dont know if this config file is correct, i find as template in internet.
I'm running Ubuntu 9.1 server on an PII Compaq. Read an article "Samba: How to share files for your LAN without user/password" [URL] and some others and can see and pull up files, can't change or delete. Here is my smb.conf:
# Sample configuration file for the Samba suite for Debian GNU/Linux. # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example
# Some options that are often worth tuning have been included as # commented-out examples in this file. # - When such options are commented with ";", the proposed setting # differs from the default Samba behaviour # - When commented with "#", the proposed setting is the default # behaviour of Samba but the option is considered important # enough to be mentioned here .....
I'm pulling my hair out trying to figure out what is wrong with my Samba share. I have set up a directory /samba to serve up some movies, music, etc, on an Ubuntu 10.04 Server box. For now, I have given that directory 777 permissions, along with the subfolders:
Code: drwxrwxrwx 4 michal michal 4096 2010-06-22 18:02 Apps drwxrwxrwx 3 michal michal 4096 2010-06-22 19:02 Music drwxrwxrwx 3 michal michal 4096 2010-08-14 19:27 Pics drwxrwxrwx 5 michal michal 4096 2010-06-22 19:48 Video This is how my smb.conf file looks like for this particular share:
Code: [share1] comment = share1 browsable = yes path = /samba write list = michal Furthermore, I went ahead and mapped the Samba user to my Linux user account in /etc/samba/smbusers:
Code: michal = "michal" When I try to login from a Windows machine using michal as the username, I can see the folders, but I am unable to create new files on the share. Considering that the file system permissions are liberal on the share directory, I have no clue as to why I'm still getting denied write permission.
I don't think it has anything to do with the config file.More to do with SElinux. I need to know how to configure SElinux so I can see my samba share when SELinuxis on. When I setenforce 0 I can seen all the files and folders set it to setenforce 1 cannot see anything.Here is the output when I ran [root@fileserver /]# getsebool -a | grep smballow_smbd_anon_write --> onsmbd_disable_trans --> onThese two options were off I tried turning them on.This is another one of the commands I tried running. I did change a few options but I am not sure which I do need to change. I am running a stand alone server so I don't need the DC option.
[root@fileserver /]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> off
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
I'm trying to set up quota limit in samba-3.0.33-3.15.el5_4.1 in CentOS 5.5, by means of the module vfs objects. In the samba howto [1] I found a very brief explanation, but it isn't working for me. The basic idea is to setup a user called 'quota2g' (uid 499) and setup the [homes] share, as it comes by default, to enforce the quota on each user share.quota2g:x:499:499:User quota 2GB:/home/quota2g:/bin/bash
I have been having off and on issues with my samba file shares. I am sharing a NTFS formated hard drive where the mount point is in my home directory, as well as a printer connected via USB. I am to the point where printing works (using it as an ipp print share, samba is configured for it, but I don't know if it works or not), and I can access the shared folder from Windows, but I can't access the shared folder from any Ubuntu machine. I get the error:
I'm planning to use a virtual CentOS box for web development (to use the same software as on the real server). I configured Samba to have root guest access to /var/www/ but it doesn't let me in /var. Chmod 777 doesn't help. Nethertheless, I have full access to /sbin and /etc.
when client goes to bind to NFS share on remote server - they are getting access denied when using the mount command; [SERVER] - CentOS 5.3 /etc/exports /mnt/data 192.168.5.199(rw) - implying the client I want to have access
I have a samba-share that mounts on my desktop. But how do I find it from applications? When I browse from application is not visible in the desktop folder.
PS. I find it with smb://pathway, but I don't know how I can do it from some gui-applications.
I installed samba server on fedora13 last week and share some files from samba server GUI. I also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP. When I open samba share from other fedora such as smb://192.168.10.2. I can see share file and when I browse folder, password required box is appeared but after I put samba username and password. The Error message is Unable to mount location Failed to mount Windows share. Even when I browsed samba share from windows xp.
Error message is \192.168.10.2smbshare is not accessible. You might not persioon to use this network resource. Contact the administrator. The network path was not found. How can I get access samba share from both fedora and XP that is what I installed on server:
I'm relatively new to liunx and I have recently installed Fedora 9 to act as a media server. I thought everything was going well until I tried to connect to my Samba share but could not.Not sure what the netbios is but I believe this can be anything I want?So as far as I can tell, the laptop can see the Samba Share, Fedora can see it's own Samba share but nothing (both laptops XP and Vista or the Media Player) can connect to the /public folder..I don't login to either Laptop with a user account, so I believe I do not have to create a user.
i want to do a script that check samba shares with command smbstatus and see if one of the folders is accessed by unauthorized user by comparing with list of authorized users.
I have Samba shares on a Red Hat server vmware virtual machine. We just upgraded our vmware tools and vmware hardware to vsphere and now I can't authenticate to the samba shares. It prompts for credentials, but it won't take the login. Has anyone seen this or have any idea how to fix this?
How come I can access samba share, and windows workgroup computer and don't have any samba package installed? Sudo aptitude show smbclient says not installed. Sudo aptitude show samba says not installed.
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
I have configure few folders access by 3 users, In common folder only users that create that document can do changes. The rest of the users can only read the file but can not do changes. Ownership of the folder is admin, group is sambashare which already have the access create and delete files. All the 3 users already in sambashare main group, and they only can edit the file that they copy or create to the common folder .........
I need to access a windows share at my university's server. When I am at the university, I can access the share by nautilus (or dolphin) in a similar way to ftp:
smb://domain%5Cusername@server/share
The thing is that when I try the above anywhere else except the university, it does not connect. I guess it has something to do with the domain, but I am not sure.
My work uses an internal software suite where the data is hosted with a linux server. It uses mysql and samba shares. We are currently opening a new location and need to be able to access the samba shares. We are able to access the mysql databases. The samba shares are used to store various files for the software such as updates, invoices (as pdf files), etc. I've setup vpn connections using windows servers in the past but I can't, for the life of me, get a VPN server setup on our linux server that windows will connect to. I've tried openvpn and pptp. I'd prefer to use the built in windows client to connect.
why cant I access samba share by short-hostname from win7.when I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com pinging short-hostname does work, but accessing it from start-run does not! accessing by ip or short-hostname.mydomain.com works fine.ssh by short-hostname from win7 works fine too.
I've got a fresh Wheezy/Xfce install.I'm trying to access a remote samba share the gigolo way. It is an external USB hard drive connected to my router. I can access it read only using the following URL with Icedove: smb://bbox/
Anyway, this is just to try and give might-be-useful information, but ultimately, I don't really want to use fusesmb. I would rather have the gigolo way working, allowing local network shares browsing, auto-connect, etc.
Running samba-3.5.6-71.fc14.x86_64. Why cant I access samba share by short-hostname from win7. When I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com
sa pinging short-hostname does work, but accessing it from start-run does not! Accessing by ip or short-hostname.mydomain.com works fine. ssh by short-hostname from win7 works fine too.
I have currently have opensuse 11.2 installed. I am trying to setup samba shares which you can only access as certain user. Currently looks like the only way I can access these share is use root username/password!
I want to which GUI I need to use to setup this up properly. And of course what setting to exactly to use.
I am trying to properly mount a samba share in order to access it from a terminal and run a script that I've written over a folder in the share. How could I do that? I tried smbclient but after successfully logging in I couldn't issue the sh command. Isn't it possible to have it mounted in the /mnt folder like a normal filesystem?
