I have just configured samba and it is working fine, the only problem that i have face when i go to access some sharing on samba server it asking me about password but the problem is that its username option is embossed. By default it will login as guest but i dont know the guest password.
View 1 RepliesI want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
I recently switched from centos to fedora as my server choice. Probably not the best decision but I like trying new things. Now before I switched I had my samba server setup just they way I wanted it. Now I'm having a hard time getting it back to that way. Here is my smb.conf
Code:
[global]
workgroup = workgroup
netbios name = netbios name
server string = Linux Server
security = user
wins support = yes
encrypt passwords = Yes
domain logons = yes
[homes]
comment = Home Directories
browseable = yes
writable = yes
valid users = %S
[me]
path = /home/me
read only = no
public = yes
create mask = 0777
directory mask = 0777
browseable = yes
writable = yes
Now I did throw away my old smb.conf because it wasn't that complicated and I figured I could reproduce it.. aside from that everything is working except for the fact that I can access any share I want to listed without it requesting a password. I have a username and password setup with smbpasswd and I think everything else is setup correctly involving samba shares but I have no idea why it won't request a password.
I want to share folder in fedora 12 so that any windows user can access my folder (without modifying its content) and there should be no password to be entered by the windows user. I tried samba gui but the folder does not open using windows.
View 3 Replies View Relatedmy main computer hostname is home, and the others are ubuntu and eduardo.In home, I try to configure samba, downloading it with "sudo apt-get install samba" and then downloading at the synaptic manager the samba-common-bin thing.I shared my folders as ROOT in home and I cannot access from ubuntu and eduardo.Then I googled and I found this site: Quote:URL]Well... I follow all steps and I can't access these files.What I need to do to share files between these computers???
View 9 Replies View RelatedI set up a samba file sharing system but my workgroup asks for a username and password see this-This is the text in /etc/samba/smb.conf:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
[code]...
I have just installed Ubuntu desktop and I am using this pc as a file server. I have already installed Samba and have it operational and viewable by my windows computers. Now the problem is that I have 2 hard drives and the way that I have Samba set up it is sharing my home directory which is wonderful but my windows computers do not have access to the second hard drive. I search for several hours this morning trying to figure out how to do this but cannot figure it out.
View 7 Replies View RelatedI have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies View Relatedi am able to set up samba server with adc it is working properly. also i set the GID and stikki bit permission in sharing so i can set only crater can delete the files. But i want some users have ability to delete permission for all files and folders in that sharing
I am not able to set that
below is testparm O/P.
[root@cserver ~]# testparm
Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[printers]"
Processing section "[testing]"
Processing section "[export]"
[Code]...
if I am tring to connect shared dir on windows machine \16.x.p.export, then i am getting error message : this path was not found. So meanwhile please let me know..what was i have missed in smb.conf file ?
Note : 1 >i have configured samba shared dir in differet network i.e : 16.x. 2 >I am trying to access on : 16.y series network. 3. i have host-allowed on both network at smb.conf file .
I have just configured samba on suse linux. I can see it in the windows workgroup but i cannot access it. When it says the server is not accessible. You might not have permission to use this network resource.I have attached a copy of smb.conf
View 2 Replies View RelatedI would like to configure an access to folder
/fileserver
for two services : Samba and VSFTPD
How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.
My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)
I installed samba server on fedora13 last week and share some files from samba server GUI i also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP When I open samba share from other fedora such as smb://192.168.10.2 I can see share file and when I browse folder, password required box is appeared but after I put samba username and password the Error message is Unable to mount location Failed to mount Windows share even when I browsed samba share from windows xp error message is \192.168.10.2smbshare is not accessible. you might not persioon to use this network resource. Contact the administrator The network path was not found.
[Code]...
I have created a shared folder via nautilus. I can not access it, because it asks me for user name and password again and again. I'm sure both username and password are exactly right. But I can not access the folder. Only when I check "Allow guest user access" it will allow me to access my data, Which is not secure enough for me.
View 6 Replies View RelatedI have NIS setup to manage all my users, and I have samba set up to share out a directory to the users windows computers - which are part of a corporate domain. I have a requirement to synchronise the NIS password to the Samba password so that when a user changes their password in the Linux environment it automatically updates the Samba password so that the user can simply update the password stored by Windows Explorer.
View 1 Replies View RelatedI am trying to setup samba to allow file sharing to: /home/kris & /var/www
I am trying the command smb://192.168.*.* from my MacBook & \192.168.*.* but when I enter "kris" & password: "******" it keep's on coming up "Incorrect Username &/or Password"
Here is my conf file:
Code:
[global]
workgroup = homegroup ;put your own workgroup name here
netbios name = intranet ; this should be your own too
server string = Intranet in Kris' Room.
; hosts allow = 192.168.1
[Code].....
I have a server at home running as a file server and DHCP connected to a switch with a wireless AP in there as-well. with this setup I can access the files and do some configurations via SSH on the actual server anytime I'm able to get the wireless signal, now lately I felt the need to be able to do the same but this time over the internet. I've read somewhere already that I'm gonna need a router with port forwarding and NAT, then know the IP address of the server but my problem is once you start talking about routers then you need broadband connection which is something I don't have. Getting a router is not much of a problem but without ADSL like connection I guess its useless, what do I need to do?
View 7 Replies View RelatedI've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
1> i have centos5.4 fileserver.
i synchronize my document of windows xp with fileserver through samba server.
while synchronzing ,virus effected file are also get sync in fileserver .
i scheduled copying in crontab also.meanwhile by synchronizing the fresh file get replaced by virus file.this result lost of my data.
is there is any solution to restrict virus file from copying through rsync....
2> is there is any program to compare size of files on samba server
We are running RedHat Enterprise Server 5. We have a Windows 7 Pro with an HP Printer attached to it, and shared. I can see the printer in RedHat, but everytime I send a print job, it just does nothing but sit there. I've even tried to attach to it via smbclient, and I get the following response: tree connect failed: NT_STATUS_BAD_NETWORK_NAME
View 4 Replies View RelatedIm using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies View RelatedOriginally Posted by van 2.0 If you are not having a problem with Samba and have nothing to offer the OP in his bid to solve the problem then your post is not relevant to the discussion. The reason I asked you to point out where SELinux has been mentioned is that those are the docs of an Enterprise OS and any relevant steps would be included.I see you are new to SELinux, but interrupting a post to point out something unrelated does not help, it just adds confusion and consternation.I think that, perhaps in your your zeal to serve as police officer of the relevance trees, you've failed to see the forest. It could be that I was not sufficiently clear in my first post here, so I'll explain it very, very slowly and carefully, so as not to cause any you any further confusion.
The original poster is unable to access his Samba shares. The original poster does not understand why and seems to think that it is configured correctly. Other posters have added suggestions about smbpasswd and testparm to check for correct syntax. Presumably, these things have not yet solved the problem, since the OP has not returned to say the problem is solved, though you linking to one of the first links that would appear in a google search for redhat and samba was no doubt wildly and extraordinarily helpful.
So, I had an idea. I recognized that, in a crazy plan to make a functional OS, the authors of Linux had allowed more than one binary to execute simultaneously. This means, that SELinux and samba can both run at the same time. Now, stay with me here - if SELinux is not configured to allow permissions for the samba user on the Samba share.... "permission denied" log errors can occur in Samba. Now, that sounds familiar for some reason. Hmmm... oh, yeah! That was what the original poster mentioned! And, I just dealt with that exact problem, caused by insufficient SELinux permissions!I knew there was a method to my madness.So, anyway, adopting your own ironically sanctimonious tone, I hope you've learned a lesson today that can improve the quality of your posting. This lesson is two-fold: (1) it's not especially good form to quibble with someone trying to help in good faith and (2) if you are going to, it pays to have something tangible to offer to go along with your condescension.No need to thank me - helping you be a better poster is its own reward, and I'm rapidly losing interest in anything you have to say in general, anyway. From what I've seen, it's not anything I couldn't find in under 10 seconds on google.
I am at a total loss. For all intents and purposes - sharing files over a lan without a password between this ubuntu 10.04 machine and my wifes laptop (windows 7) should be trouble free.I've installed samba, and created an smb.conf file in /etc/samba
I want to note that I was using Arch Linux and this exact setup worked flawlessly. Why on earth would it not work the same in Ubuntu? Is it not the same Samba??
i would like to setup one of my old pcs as a file server and internet gateway; we are living in a large building shared with 40 others. the ubuntu box would be the one connected to the internet via ethernet and sharing connexion via wifi. i haven't started yet - presently, i am doing the ground work and reading before to start i understand sharing the internet is relatively simple and can be done from the GUI
What we would like is slightly like BT Fon or BT Open Zone in the UK: you can hook on a free network but in order to access outside (internet: email, web, ftp, etc) you need to login login would help us monitor fair usage. I imagine something with username and password for each user would do: as we are a few in the same building not everyone is actually paying for the connection and we don't want to end up with rather large excess bills. So the ones who are paying access both files and internet; those who dont just have access to the files on the local server.
Do i need Ubuntu server to set this up? What hardware would be ideal - given we are all far from rich but willing to have a nice setup
It would be great if you could share some knowledge around the topic and eventually provide some tutorial; also any heads-up on the hardware side would be great! (signal booster, etc - there's 3 floors and 3 buildings)
I am using RHEL5 in that i have installed samba rpm as well as created samba users while access the shared folders in WINDOWS i got "access dined" error.
View 1 Replies View RelatedI try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies View RelatedI have set up my samba server. I tested from my windows side, all the public ones works fine except the [homes]. Here is my [homes] setting:
Code:
[homes]
comment = Home Directories
browseable = yes
writable = yes
The homes is suppose to let each user see his/her own home directory. But I tested at the windows side, I found that windows doesn't even prompt me about username or password, it just directly give me "not accessible" error. How do I config so my windows side at least prompt me about username/password?
I finished setup Samba PDC with Openldap backend. I can joint Winxp client to domain but can not change pass by press Ctrl + Alt + Delete and choose Change password button
This is my conf.
I used
samba3x-3.3.8
openldap 2.3.43
slapd.access.conf
Code:
access to attrs=userPassword,shadowLastChange,sambaNTPassword,sambaLMPassword
by dn="cn=Manager,dc=microhdesk,dc=net" write
by anonymous auth
by self write
by * none
[Code]....
I'm using on my smb.conf
# Sincronizacion de cuentas LDAP, NT y LM
# unix password sync = Yes
ldap passwd sync = Yes
[code]....
I'm new with Samba and have access problem with Samba on Rhel 5. I want to share iso directory, and user admin can read and write while user bill can read only. smb.conf file looks like this#======================= Global Settings =====================================
[global]
workgroup = CORP
security = SHARE
[code]....