General :: Page Cannot Be Displayed Until Refreshed
Jul 19, 2011
I have installed squid proxy server on cent os 5.5 the problem i am facing is with some websitesthis issue arose suddenly the issue is when i access certain sites then i get page cannot be displayed but when i refresh it it displays the page. again when i close the browser and start again same issue. What could be the reason how can i solve it
I've tried untinstalling and reinstalling the package for ampache.
I still cannot get localhost/ampache to display in my browser. I can't even get localhost to display in my browser. I've tried checking around in config files to see if i have ports open for listening. (i'm a noob at all of this)
My router has the port open that i specified. on code - service apache2 start i get:
(..Address already in use: make_sock: could not bind to address 192.168.1.65:8000 no listening sockets available, shutting down
I can't find any other config files. I don't know what else to do with the amapche installation. (which included an install of mysql-server package, even tho i NEVER got a prompt to enter in root passwd for the mysql db.)
When I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.
I installed ubu server 9.10 on my desktop, then I tried to install webmin and I was able to do that too. When I try to connect to webmin I get "page cannot be displayed" so I thought let's change the port...I changed to port 443 as recommended on the website.
Here is the miniserv.conf: port=443 addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ..... Now I tried connecting using the ip address and the hostname. I also tried with http and https https://hostname.com:10000 and 443 ... no go.
I have duel boot (XP & Jaunty). I have installed Jaunty in one of my parition through wubi installer. Problem is, though my network connection shows active, I am unable to connect internet via firefox browser or any other browser.
1. I have plugged in ethernet wired connection.
2. I have single network connection (wired connection1)
I installed Ubuntu 9.10 on an old PC, Dell dimension L550r, PIII500, 512M ram. There is a problem that monitor is not detected. I could logon as 'xterm' type, but the window size is only 1/4 of screen. When I logon as 'GNOME', it seems screen is not refreshed. media player window is blank, but can see a static image if minimize and restore window. Even terminal window is blank.
Go to "System"->"Preference"->"Display", shows "monitor unknown" I can not find file /etc/X11/xorg.conf, is this normal?
i'm not able to play music at all. videos videos seem to crash my browser and using either rhythmbox or banshee they crash too.i ran rhythmbox by typing sudo rhythmbox and tried to play a file and it displayed a pop-up window saying that my autioaudiosink element is missing and the terminal displayed this:
code: (rhythmbox:8415): rhythmbox-warning **: unable to grab media player keys: could not get owner of name 'org.gnome.settingsdaemon': no such name warning: unhandled message: interface=org.freedesktop.dbus.introspectable, path=/, member=introspect
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
I have a fresh new F13 installation and I am not linux expert, I need to test Fedora for some reasons. When I try to start HTTPD or vncserver services, status display as "This service is being refreshed right now", it keeps like this for a long moment. Closing and reopening services applet, I notice that both services are stopped. I googled about apache, the 1st thing I understood is to search error_log, opened it in gedit, nothing is written in this file.
I actually don't know what was the cause of this. Because of some display problems such as openSUSE freezes with external monitors, I have included xorg repository and updated relevant packages. A couple of days ago, suddenly my system started not refreshing the screen properly. For example, when I change a folder in Nautilus, the file pane is blank even though there are lots of files. The files appear when I move mouse cursor around or I activate some other window with alt-tab, and get back. Or in OpenOffice Witer, if I press arrow keys, there are lots of residual image of the cursor. So the screen is not properly refreshed right now.
I installed Ubuntu 9.10 on an old PC, Dell dimension L550r, PIII500, 512M ram. There is a problem that monitor is not detected. I could logon as 'xterm' type, but the window size is only 1/4 of screen. When I logon as 'GNOME', it seems screen is not refreshed. media player window is blank, but can see a static image if minimize and restore window. Even terminal window is blank.
Go to "System"->"Preference"->"Display", shows "monitor unknown". I can not find file /etc/X11/xorg.conf, is this normal? xrandr command output: Screen 0: minimum 640x400, current 1024x768, maximum 1024x768 default connected 1024x768+0+0 0mm x0mm 1024x768 60.0* 75.0 70 832x624 75.0 .....
I don't know if the title is a correct description of the problem I have. I registered a domain name in godaddy, created a subdomain name and pointed it to some name servers. After some time, I moved my website so I change the name servers of this subdomain name. But the problem now is it is still pointing to the old name servers. Everytime I visit the website in my computer, I get errors. But I try it in another computer, I works. So I suspect there is something left in my computer that still tells my browser to go for the old name server. I've cleared cache and temporary files of this browser but it still does not change.
I want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
Im having issues to connecting to my network and it continues to not connect and keeps saying that webpage cannot be displayed....i have other computers here that connect just find....i was wondering is there a command like ipconfig or something
The following are the output of command "ifconfig -a":
[Code]....
The interface "eth0", which is down, was not displayed, but loopback interface has been displayed. So, how can I make my application display all interfaces, including the interfaces which are down, but excluding the loopback interface?
I have an 80GB Intel X25-M SSD drive installed on a Linux box running Debian 5.0. The file system on the SSD is ext4. I've had no problems with the drive, and have been using it for quite some time as both swap file storage as well as a place to store a few large database files which require random access.
I changed the names of the files here for security reasons, but other than that this is exactly what ls has output. Obviously, the total size readout is incorrect.
Here is the corresponding output from df
> df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 74G 35G 36G 50% /ssd
Despite this incorrect readout, the drive seems to be working fine, and diagnostic utilities turned up nothing wrong with the drive. Is this some sort of known bug in ext4, or is it more likely there's something physically wrong with the drive?
I'm programming an web system using LAMP, currently I'm using Ubuntu 10.04, so, when I load the index page the background image is not displayed, it looks like a permission file issue - I guess-, so currently all images have this permissions:
Code: -rw-r--r-- and the permissions for the php files are:
Code: -rwxr-xr-x
what permissions should I set to display the background image?
Having problems displaying French chars. They are dumped into an nfs share by a Windows/cifs configuration which has been blamed for this unwanted behavior but when I transfer a file continaing � via WinSCP to the RedHat, instead of getting the filename Response.txt I see R?sponse.txt. When I refresh WinSCP to view the file it views it ok.
I have linux firefox installed on my notebook, and after having a bit of a problem with it, I did a full factory reset back to all the original settings. Now when I connect to the internet, some of the pages now are not displayed properly. For instance, when visiting E-bay, the listings look fine, but my E-bay page is all listed down the page, (if that makes sense) and I cannot look at any of the photos. MSN is also, how can I put this, spread out across the page. I have done a live update to see if that makes a difference, but no joy.
I vaguely remember that there is a way to store instructions for vim in my file (like tabstop width etc). I'm not speaking of settings in vimrc but of storing those settings with in the file to be edited. That way the tabstop has always the right width even if I transfer this file to another computer. However, I can't remember what the magic word is so that vim picks up those settings when loading the file.
Got 3 computers connected by ethernet to a router modem. At this router modem only port 80 is forwarded to a web server (one of the 3 computers). Now I realized several times a port scanning attack displayed at interactive firewall of Webserver ( Apache at Mandriva LINUX ). Actually the message is port scanning attempt of heanet (actually this names are different mostly). I wonder how to figure out is this portscanning attack possible through port 80 or is the modemrouter (Draytek VIGOR) misconfigured, compromised or one of the other 2 machines (Windows) are compromised and attacking the server inside intranet?
On FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
i am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.