I have duel boot (XP & Jaunty). I have installed Jaunty in one of my parition through wubi installer. Problem is, though my network connection shows active, I am unable to connect internet via firefox browser or any other browser.
1. I have plugged in ethernet wired connection.
2. I have single network connection (wired connection1)
A couple of weeks ago my laptop's wifi started acting up, to the point that it didn't function. When I click the nwManager icon to being up a list of available networks, it is empty. If I try to create a new network, with the credentials of my modem, it appears to work, and asks for the password. After I enter the password, it seems to work for about 30 seconds (much longer than normal) but then it prompts me again for the password. This cycle continues indefinitely.
I'm running Karmic on a Dell i1525. how to find out what wireless card I have.
am new to ubuntu, have some issues with connecting to wireless. I have downloaded my wireless drivers and installed, I can see that my wireless is on from the indicatior, but I cant connect to any wireless access point because I cant locate network manager on the notification area. Am using Dell inspiron 1501.The second issue I have is connecting as root. after I installed ubuntu, it created a user for me which I specified during installation, but most things am doing requires root privilleges. I cant connect as root because I dont know root password, I have tried changing the password but it doesn't go. Pls guys help me sort out these issues.
View 2 Replies View RelatedHow to parse the bunch of values displayed by the socket program into the php file so that further it can be displayed in HTML page
View 1 Replies View RelatedI am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail
View 6 Replies View RelatedI followed (or at least tried to follow) tutorials on doing this. I installed network-manager-pptp and tried to configure network manager to connect to a VPN. In the settings when I select MPPE with 128-bit encryption, after I've selected it and applied it, I check the settings and it's invariably unchecked. I tried using KVpnc after getting frustrated with network manager, and I can't seem to get that working either. I've been trying to search for info on this, and I can't seem to find anything on why I can't select MPPE with 128-bit encryption. That seems like it might be why I'm unable to connect to the VPN?
View 1 Replies View RelatedI have been using Hardy for about 3yrs now and using dialup to connect to the internet. I have a 64bit ASUS with a nVidia ethernet interface........I have just recently switched to cable broadband with a wired connection direct to the eth0 port. I have another computer running puppy linux in which the broadband works. hence this is how I am typing this now. I have connected my ubuntu machine to the cable and the network admin shows a wired connection but will not let me browse on the net with any browser. Not really sure how I got puppy to find it, but it did.
I have used the network manager on both machines with one connecting and the other not. I know there a newer ubuntu's out but I really do like Hardy and want to keep it, but without internet connection other than dialup it seems a bit lame. I am not above using command line options as I use wodim and wget all the time, so my question is.
Accidentally I removed the NM Applet from the panel and I am trying to reset it. When I right-click on the panel and "Add to Panel", I couldn't see Network Manager. Hence I couldn't connect to the available wireless network. I am able to add Network Monitor, which is similar to Network manager, but this just displays info about current network.
View 5 Replies View RelatedI have a 5720 Mini PCIE broadband modem card and though it works, it won't connect automatically in a Ubuntu system. Network Manager says it is enabled when I right click on the icon, but when I do a left click it says it is disabled. I have to right click and disable and then enable before my Verizon connection will work.
View 1 Replies View RelatedI've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
I've tried untinstalling and reinstalling the package for ampache.
I still cannot get localhost/ampache to display in my browser. I can't even get localhost to display in my browser. I've tried checking around in config files to see if i have ports open for listening. (i'm a noob at all of this)
My router has the port open that i specified. on code - service apache2 start i get:
(..Address already in use: make_sock: could not bind to address 192.168.1.65:8000
no listening sockets available, shutting down
I can't find any other config files. I don't know what else to do with the amapche installation. (which included an install of mysql-server package, even tho i NEVER got a prompt to enter in root passwd for the mysql db.)
Currently using dhcp.
I have installed squid proxy server on cent os 5.5 the problem i am facing is with some websitesthis issue arose suddenly the issue is when i access certain sites then i get page cannot be displayed but when i refresh it it displays the page. again when i close the browser and start again same issue. What could be the reason how can i solve it
View 1 Replies View RelatedI'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
View 6 Replies View RelatedWhen I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.
View 11 Replies View RelatedI installed ubu server 9.10 on my desktop, then I tried to install webmin and I was able to do that too. When I try to connect to webmin I get "page cannot be displayed" so I thought let's change the port...I changed to port 443 as recommended on the website.
Here is the miniserv.conf:
port=443
addtype_cgi=internal/cgi
realm=Webmin Server
logfile=/var/webmin/miniserv.log
errorlog=/var/webmin/miniserv.error
pidfile=/var/webmin/miniserv.pid
logtime=168 .....
Now I tried connecting using the ip address and the hostname. I also tried with http and https
https://hostname.com:10000 and 443 ... no go.
I am sharing files between three computers: ubuntu pc , windows xp pc and windows vista pc.( using samba ) Windows xp displays ubuntu pc correctly but vista does not,ubuntu pc is displayed as unknown device.Despite of this i connect vista and ubuntu via ip. I would like see my ubuntu pc in windows vista network.
View 2 Replies View RelatedI recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies View RelatedI have started wvdial and able to ping all ips but not able to open any page in the browser
I dont have any proxy server.
Before i configured proxy server elinks open web pages. I configured squid proxy server but the elinks display error Unable to retrieve web page. squid running successfully but configuration not working My Configuration isacl mynet 192.168.1.9/255.255.255.0 http_access deny mynethis simple configuration is not working i dont know what i put wrong.Note : Centos 4 running as a guest Operating System in windows xp(Microsoft Virtual PC 2007)
View 1 Replies View RelatedI have been getting internet thru the NetworkManager service in FC12. Suddenly today it refused to connect. I tried turning the service on and off, made sure logon info was correct, no luck. Finally I just turned it off and turned on Network service, and that worked. Is there some kind of bug in NetworkManager these days?
View 2 Replies View RelatedI had an old machine running Feisty.I followed the EOL guides and upgraded from 7.04 => 7.10 => 8.04 => 8.10 (intrepid).Now that I'm at intrepid, I want to use the update manager to upgrade to 9.04 (Jaunty). Whenever I launch update manager (System->Administration->Update Manager) everything looks fine until I choose "New distribution release '9.04' is available" and click the Upgrade button.
At this point, Update Manager complains and says "Could not find the release notes" "The server may be overloaded". I'm assuming this could be a faulty URL somewhere, but I wouldn't know where. My sources.list seems to work fine for regular intrepid updates, so not sure there would be anything there that could be the fault. Once I get this error, I can only click "close".
Extracting the upgrade failed. There may be a problem with the network or with the server. Obviously, my general networking is fine (or I wouldn't be able to post this message)..and again, standard updates work fine.Any insight into what is causing this (or maybe how Update Manager works so that I might try a bit of debugging myself?
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View Relatedfor wireless when im out i can use some open wifi fine, but some give me a page that says the network is unsafe something about tunnel i think it was.
View 3 Replies View RelatedI had been running Fedora 12 for some time without much difficulty until I had to change the motherboard of the computer. The new MB comes with Realtek 8112L PCIe Gigabit LAN controller.I am not able to use this LAN controller without Network Manager. The problem is I am not able to set a static local IP with it. Network Manager -> Edit Connections -> Auto eth2 -> edit -> IPV settingsAs soon as I change Method to Manual, 'Apply' button gets grayed out.I am not able to save any change.
View 5 Replies View RelatedI recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedBeen using since summer 2009 the xserver no backfill from PPA: [URL] and it was working fine with my ATI video card. No heavy CPU usage when restoring from minimized and a general performance boost were the results of that use.But recently made an upgrade and realized that xserver-xorg-core package (check it from synaptic manager) has been upgraded to a jaunty-proposed version and the problems started to appear again!So using Synaptic I selected this package and hit CTRL-E key in order to choose the nobackfill version. This way things got back to normal!
View 2 Replies View RelatedI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
