Ubuntu Servers :: 9.10 - Webmin Not Working (Page Cannot Be Displayed)

Jan 23, 2010

I installed ubu server 9.10 on my desktop, then I tried to install webmin and I was able to do that too. When I try to connect to webmin I get "page cannot be displayed" so I thought let's change the port...I changed to port 443 as recommended on the website.

Here is the miniserv.conf:
realm=Webmin Server
logtime=168 .....
Now I tried connecting using the ip address and the hostname. I also tried with http and https
https://hostname.com:10000 and 443 ... no go.

View 9 Replies


Ubuntu Servers :: Webmin Not Working - Webpage Can't Be Displayed

Jan 13, 2011

I have installed ubuntu server 10.04 on a virtualhost. I have installed webmin fine.
When I try to access the webpage from my web browser the webpage cant be displayed.
I have attached the output of ifconfig.

View 3 Replies View Related

Server :: Parse The Bunch Of Values Displayed By The Socket Program Into The Php File So That Further It Can Be Displayed In HTML Page?

Apr 15, 2011

How to parse the bunch of values displayed by the socket program into the php file so that further it can be displayed in HTML page

View 1 Replies View Related

Ubuntu Servers :: EC2 10.04 EBS AMI & Webmin No Working

Jun 17, 2010

I recently started with Amazon's EC2, and it's been smooth sailing up to this point. I installed the official EBS AMI ( ami-714ba518 ) for Ubuntu 10.04 and installed LAMP, etc. All this worked fine. However, Webmin is a bust. I cannot fathom why I can't get Webmin working after adding the webmin repo and installing via apt-get. This worked just fine on my physical server, but on Amazon it gives me "Firefox can't establish a connection to the server at xxxxxxx:10000." I made sure my security group allowed port 10000 through to my IP, and MySQL client connections work fine, so that can't be the problem.

View 9 Replies View Related

Ubuntu Servers :: Everyting Is Working Except No Map Is Displayed?

Jan 15, 2010

I have set up a mapserver, everyting is working except no map is displayed, it looks like a problem with the tmp folder where the images should be writing to. I have searched for a solution and it seems that the user group needs to be www-data, however on my system apache is set as root not www-data and www-data does not exist as a group. Can I simply create this group? if so how?Then I assume I just do the following:

sudo chgrp www-data [path]/tmp
sudo chmod 755 [path]/tmp
sudo chmod g+s [path]/tmp


View 1 Replies View Related

Ubuntu Servers :: Dansguardian + Squid + Webmin = Not Working

Mar 22, 2011

I have a proxy server (squid-3) that I would like to setup Dansguardian to do additional web filtering.

The system:

Ubuntu 10.10 - all updates as of today
Dansguardian - (latest update)
Squid3 - latest update (not squid 2.7)
Webmin - 1.530 (all updates)
Webmin dansguardian module - 0.7.1

Ok - I have all of the above installed. When I go to the DG module page in Webmin, I get the following:

Warning - the version of DansGuardian you have is not supported by this Webmin module version
Webmin Module Version 0.7.1 supports DG version 2.10 (& 2.9)
Currently installed DG version

This obviously makes no sense, since I am running DG version 2.10.1...

PS. I have squid installed, but not configured (still tinkering) - could this be the problem? That squid needs to be running for DG to work?

View 2 Replies View Related

Ubuntu Servers :: Webmin Dependency - Install Webmin On Edition 10.04 ?

Apr 3, 2010

I encountered a a dependency issue when trying to install Webmin on Ubuntu Server Edition 10.04 Beta1.

When you try to install webmin, libmd5-perl is not available in any of the lucid repositories:

I resolved the dependency prob by adding the following repository to my /etc/apt/sources.list: deb [url]

Then I did a sudo apt-get update then sudo apt-get install and libmd5-perl installed fine along with webadmin. BTW. I got a GPG error when doing a apt=get update because I did not import the public key for the debian repos I used to get libdm5-perl, which doesn't matter to me as I commented out the repos once I got libmd5-perl installed.

View 1 Replies View Related

Ubuntu :: Localhost Page Cannot Be Displayed

May 2, 2011

I've tried untinstalling and reinstalling the package for ampache.

I still cannot get localhost/ampache to display in my browser. I can't even get localhost to display in my browser. I've tried checking around in config files to see if i have ports open for listening. (i'm a noob at all of this)

My router has the port open that i specified. on code - service apache2 start i get:

(..Address already in use: make_sock: could not bind to address
no listening sockets available, shutting down

I can't find any other config files. I don't know what else to do with the amapche installation. (which included an install of mysql-server package, even tho i NEVER got a prompt to enter in root passwd for the mysql db.)

Currently using dhcp.

View 1 Replies View Related

General :: Page Cannot Be Displayed Until Refreshed

Jul 19, 2011

I have installed squid proxy server on cent os 5.5 the problem i am facing is with some websitesthis issue arose suddenly the issue is when i access certain sites then i get page cannot be displayed but when i refresh it it displays the page. again when i close the browser and start again same issue. What could be the reason how can i solve it

View 1 Replies View Related

Software :: Apache Is Not Starting - The Page Cannot Be Displayed

Jan 7, 2010

When I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.

View 11 Replies View Related

Networking :: Unable To Use Network Manager In Jaunty - Page Could Not Be Displayed

Mar 7, 2010

I have duel boot (XP & Jaunty). I have installed Jaunty in one of my parition through wubi installer. Problem is, though my network connection shows active, I am unable to connect internet via firefox browser or any other browser.

1. I have plugged in ethernet wired connection.

2. I have single network connection (wired connection1)

View 4 Replies View Related

Fedora Servers :: Copied The Web Page Files To Its Document Root <var/www/html> & Disabled The Default Web Page?

Jun 8, 2009

I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ´╝îit shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to in LAN . Just for in case , I also download and running the DDNS software & installed it on PC in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation

View 2 Replies View Related

General :: Man Pages Not Displayed / Saying Formatting Pages And Then It Is Displaying Blank Page?

Sep 9, 2009

when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.

View 6 Replies View Related

Ubuntu Servers :: Webmin - How To Add New Domain

Apr 4, 2010

I'm just getting familiar with my new VPS. I have webmin installed. I'd like to host more than 1 website on my server and I just can't figure out how to add a new domain (addon domain) to my server.

View 1 Replies View Related

Ubuntu Servers :: Run Two Sites With Webmin?

Sep 5, 2010

Webmin running two websites from one server, i've made a second virtual server for my second site including its own document root with it's own index.html file ,but for some odd reason they both run the same site. And i use a Static ip address.



View 7 Replies View Related

Ubuntu Servers :: Unable To Use The Webmin

May 4, 2011

I have just done a fresh install of server 11.04 32bit.I installed webmin. I can hit webmin , but it doesn't take my login. I tried with both my users but it refuses to log me in as if my username or password is wrong.

View 5 Replies View Related

Ubuntu Servers :: Start To Finish Using Webmin?

Apr 2, 2010

I put together this 500+ page .pdf how-to, if your looking to setup a server, and manage it with Webmin. built on Debian, but should work here to for the most part[URL]..

View 9 Replies View Related

Ubuntu Servers :: Good Port For Webmin ?

Apr 11, 2010

I was wondering if I can use a different port for WebMin down below 1024 where I forward ports to my Linux box, rather than the current 10,000.

The reason is I forward higher ports to the Windows machine at present.

The goal is to keep Linux services down in the low port range. Suggestions?

View 3 Replies View Related

Ubuntu Servers :: Setup My Own Webserver Using Webmin

Nov 27, 2010

I am planning to setup my own webserver using webmin, but from what i've read i apprently need two harddrives. one for the OS & one for the data. can i just partition my harddrive into two because i dont have another hdd lying around. i also just want to note that this is my first time trying to do something like this sooo I rly want to try to set up my own server . As a side note ill list the specs of the comp i plan to use as a server. Pentium 4 2.8ghz, 1gb DDR, 80GB 7200RPM HDD.

View 7 Replies View Related

Ubuntu Servers :: Webmin Backup Does Not Work?

Mar 7, 2011

I want to make a daily backup of my websites from ubuntu server over ftp to another server I own. Backup schedule and process works, the problem is backup restore. Winrar says: The file is corrupt, 7-zip crashes.

Backup archive looks ok (the same size as original folder) and you can also extract it ignoring the error by winrar. But the extracted folder only contains one or two subfolder and one file(usually image) and that's all.

If I try to restore from Webmin it doesn't report any error, and it looks like restore worked. But restored files are nowhere.

View 5 Replies View Related

Ubuntu Servers :: Do You Need A Root-account When Using Webmin?

Mar 30, 2011

I've got an old computer around that I've put Ubuntu server 8.04 on.At the moment, this is only a little hobby of mine purely for educational purposes. (Great for learning Linux!) After using this tutorial:URL...for setting up a LAMP-server, I'm trying to figure out is whether or not setting up a root-password is necessary or not. I think the tutorial is really great for a newbie, but it consistently uses su instead of sudo.I'm aware of the fact that setting a root-password isn't recommended in the documentation, but don't you need a root-account to be able to run tools such as webmin?

View 8 Replies View Related

Ubuntu Servers :: Accessing The Webmin - This Webpage Is Not Available

Apr 28, 2011

i try to access my webmin but it give me "This webpage is not available." now, webmin is useless for me if i want to uninstall webmin, is some other application will affected (like apache, mysql, etc) ?

View 9 Replies View Related

Ubuntu Servers :: System Log Is Not Showing Up On Webmin?

Aug 11, 2011

I am using ubuntu 10.04.3 LTS and I have webmin 1.560 installed but when I look at Un-used Modules its showing system log is there and when I click on it I get this: The syslog configuration file /etc/syslog.conf was not found on your system. Maybe syslog is not installed, or a newer version like syslog-ng is in use, or the module configuration is incorrect.

View 2 Replies View Related

Ubuntu :: Displayed A Pop-up Window Saying That Autioaudiosink Element Is Missing And The Terminal Displayed?

Jan 12, 2010

i'm not able to play music at all. videos videos seem to crash my browser and using either rhythmbox or banshee they crash too.i ran rhythmbox by typing sudo rhythmbox and tried to play a file and it displayed a pop-up window saying that my autioaudiosink element is missing and the terminal displayed this:

code: (rhythmbox:8415): rhythmbox-warning **: unable to grab media player keys: could not get owner of name 'org.gnome.settingsdaemon': no such name
warning: unhandled message: interface=org.freedesktop.dbus.introspectable, path=/, member=introspect


View 1 Replies View Related

Ubuntu Servers :: No Frontpage Is Displayed At Localhost?

Sep 6, 2010

Instead of XAMPP or LAMP, I installed a local web server to my Ubuntu 10.04. Apache and phpmyadmin works well.

I copied the files of my Joomla website to /var/www folder. When I go to administrator panel, it works. But when I type in the browser "http://localhost/[folder_name], a blank page appears and nothing else.

View 2 Replies View Related

General :: Fail Webmin Install - E - Package Webmin Has No Installation Candidate

Apr 6, 2010

I have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.

Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."

The first thing i did after installing webmin was edit the sources.list

Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it

I also uncommented

deb cdrom:

I then typed this sudo wget [url]

After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl

Then i tryed to install it and got that error.

I also tryed install it using this tutorial [url]

When i got to the part when i need to type

sudo apt-get install update this is what happened

View 10 Replies View Related

Ubuntu Servers :: System Info Displayed At Login?

Oct 1, 2010

I've been trying to figure this out... What command does the system use to display this at login:


System information as of Fri Oct 1 08:35:54 CDT 2010

System load: 0.28
Usage of /: 10.8% of 17.89GB
Memory usage: 51%
Swap usage: 3%
Processes: 112
Users logged in: 1
IP address for eth0: <ip.address>

It's not uname, free, top, df, uptime, etc... Also doesn't appear to be anything in /proc that I've found. Anyone know what it is? I want to grab its output as part of a script. I could use other commands I suppose, but this system info output is neat and concise.

View 7 Replies View Related

Ubuntu Servers :: Tcp Port Webmin Is Set From A Terminal On The Host Computer?

Feb 26, 2010

I'm having trouble with Webmin. I got it up and running. However, I was changing the 'listen on port' to something other than port# 10000. I made sure ufw was open to the tcp requests on my new webmin port only. UDP has been disabled. I type in my browser my ip address with the new port, and I get 'problem loading page' now. How can I see the tcp port webmin is set from a terminal on the host computer? Do I goto a webmin folder and change a .conf file?

View 4 Replies View Related

Ubuntu Servers :: Script To Install Transparent Proxy With Webmin

Apr 11, 2010

I just made a script to install a Transparent Proxy with DHCP Server, Content Filtering and Webmin. It installs and configures the modules and starts them. I can use from two to five interfaces (eth0, eth1, eth2, eth3 & eth4). I've tested in 8.04 to 9.10 and works fine. It does not configures BIND and IPTABLES, just install all the modules needed for a transparent proxy, and configures DHCP, SQUID, DANSGUARDIAN and WEBMIN for Ubuntu. I did it because mostly all configurations I do are transparent proxies.

What does:
1. Installs many packages needed for transparent proxies, and webmin. Also installs perl modules needed.
2. Configures default Squid settings for transparent proxies, and a better Dansguardian content filtering for public access.
3. Configures and fixes Webmin DHCP and Dansguardian modules to work on Ubuntu.
4. Configures DHCP Server subnets.

What doesn't:
1. IPTABLES and BIND. You must configure both manually. IPTABLES can be configured with Firewall Builder or other firewall tool. BIND can be configured using Webmin or the CLI.
2. Configures /etc/network/interfaces. You must configure all network interfaces correctly. Any mistake can screw the automatic configuration.
3. Dansguardian Blacklists. You must use your prefered blacklists. I use URLBigBlacklist with a modified script to work on Ubuntu (downloaded from Danguardians' Extras and fixed up to work on Ubuntu).
4. Check the script if there's something missing.

View 1 Replies View Related

Ubuntu Servers :: Tomcat Manager And Webmin Not Accessable On EC2 Instance

Jun 23, 2010

I've got my first EC2/cloud instance of Ubuntu up and running. This is my first time really dealing with the server edition. I've loaded Apache, Tomcat, PostgreSQL, and Webmin. I've got a public IP on the instance and it is working. I've opened, for now, ports 80, 8080, 443, and 10000 to

I cannot get into Tomcat Manager or Webmin at all through a browser. For Tomcat, I've restarted, stop/started, and verified that Tomcat is running. I installed Webmin all through apt-get commands so any dependencies should have been installed (first time doing it this way), but cannot get to the login screen. But if I just go to the IP, Apache goes to the "It Works." splash page. Did I miss some set up? Is there an internal firewall in Ubuntu Server edition that needs to be set?

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved