Im having issues to connecting to my network and it continues to not connect and keeps saying that webpage cannot be displayed....i have other computers here that connect just find....i was wondering is there a command like ipconfig or something
View 1 RepliesI have installed ubuntu server 10.04 on a virtualhost. I have installed webmin fine.
When I try to access the webpage from my web browser the webpage cant be displayed.
I have attached the output of ifconfig.
i'm not able to play music at all. videos videos seem to crash my browser and using either rhythmbox or banshee they crash too.i ran rhythmbox by typing sudo rhythmbox and tried to play a file and it displayed a pop-up window saying that my autioaudiosink element is missing and the terminal displayed this:
code: (rhythmbox:8415): rhythmbox-warning **: unable to grab media player keys: could not get owner of name 'org.gnome.settingsdaemon': no such name
warning: unhandled message: interface=org.freedesktop.dbus.introspectable, path=/, member=introspect
[code]....
How to parse the bunch of values displayed by the socket program into the php file so that further it can be displayed in HTML page
View 1 Replies View RelatedIs there an easy way to use a web page as a screen saver under Linux? preferably without allowing any interaction with whats presented.
I'd like idle admin desktops to show our network monitoring page.
The following are the output of command "ifconfig -a":
[Code]....
The interface "eth0", which is down, was not displayed, but loopback interface has been displayed. So, how can I make my application display all interfaces, including the interfaces which are down, but excluding the loopback interface?
I have an 80GB Intel X25-M SSD drive installed on a Linux box running Debian 5.0. The file system on the SSD is ext4. I've had no problems with the drive, and have been using it for quite some time as both swap file storage as well as a place to store a few large database files which require random access.
However, I noticed this odd size readout from ls:
> ls -lh /ssd
total 34G
-rwx------ 1 root root 23G 2010-12-11 18:00 file1.dat
-rwx------ 1 root root 22G 2010-12-11 18:00 file2.dat
I changed the names of the files here for security reasons, but other than that this is exactly what ls has output. Obviously, the total size readout is incorrect.
Here is the corresponding output from df
> df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 74G 35G 36G 50% /ssd
Despite this incorrect readout, the drive seems to be working fine, and diagnostic utilities turned up nothing wrong with the drive. Is this some sort of known bug in ext4, or is it more likely there's something physically wrong with the drive?
Is there a way to get Linux to log all of the output that you see on the screen at boot?
It would sure beat having to dig through all of the different log files trying to find what was seen while it was booting.
I had a dual boot system with ubuntu and windows running fine, while using ububtu grub loader.
Now i installed red hat on the same computer and mentioned to install grub in the first boot partition sector.
Now while starting the the computer i see only the previous options to boot into eithre windows or ubuntu.
I dont see any option for red hat.
modify the ubuntu loader to read grub
I have installed squid proxy server on cent os 5.5 the problem i am facing is with some websitesthis issue arose suddenly the issue is when i access certain sites then i get page cannot be displayed but when i refresh it it displays the page. again when i close the browser and start again same issue. What could be the reason how can i solve it
View 1 Replies View RelatedI have some web pages that I need to frequently check. Is there any tool that will check for updates and send notifications by mail or RSS. These pages are not RSS supported.
I am looking for a Linux standalone application, browser extension, or a service that sends mails.
how to download a webpage using unix nd then parse throufh its content to extract particular portion (like header or title) ?
View 5 Replies View RelatedI'm programming an web system using LAMP, currently I'm using Ubuntu 10.04, so, when I load the index page the background image is not displayed, it looks like a permission file issue - I guess-, so currently all images have this permissions:
Code:
-rw-r--r--
and the permissions for the php files are:
Code:
-rwxr-xr-x
what permissions should I set to display the background image?
I have webpage its charset is 8859-9 and it was prepared in windows with char encoding ascii. From ftp access, I am opening it via gedit in ubuntu then turkish chars changes like (turkish ı became ý). What can I do to avoid this kind of stupid things?
View 2 Replies View RelatedI have set up a linux box running slackware 12.0, along with Apache 2.2.4, on my LAN I have a couple of computers. I want to force them to a webpage under document root, the webpage will be a agreement webpage. Is this possible to do with Apache? This will not be real domain, so my guess it that I would have to tell my DNS server to resolve the ip address to the hostname of my slackware box.
View 14 Replies View RelatedI have just install conky to my Linux Mint 9 system.I like to know if I can set up conky to auto reload a webpage.FYI, the webpage do not have rss feed therefore I cannot set conky to use rss.
View 10 Replies View RelatedI just setup my first Linux box using [URL] everything went along fine except now I have a problem that I cannot seem to solve. I've set up a webpage on the box for my company's intra-net for testing purposes but I cannot get the links to work. On the server itself all the links work but Firefox still ask me to authenticate with the Adobe Flashplayer (player10), but when I access the page from another computer I have the following issues:-
1. Even though hostname -f shows the a fully qualified domain name I have to use the IP Address eg. 192.168.100.100
2. I can access the page but the links leading to the other pages do not work I get "Webpage cannot be found or the HTTP 404 Not Found" Error Message
3. None of the embedded pictures show up I get the red X.
Having problems displaying French chars. They are dumped into an nfs share by a Windows/cifs configuration which has been blamed for this unwanted behavior but when I transfer a file continaing � via WinSCP to the RedHat, instead of getting the filename Response.txt I see R?sponse.txt. When I refresh WinSCP to view the file it views it ok.
[Code].....
I have linux firefox installed on my notebook, and after having a bit of a problem with it, I did a full factory reset back to all the original settings. Now when I connect to the internet, some of the pages now are not displayed properly. For instance, when visiting E-bay, the listings look fine, but my E-bay page is all listed down the page, (if that makes sense) and I cannot look at any of the photos. MSN is also, how can I put this, spread out across the page. I have done a live update to see if that makes a difference, but no joy.
View 9 Replies View Relatedmy webpage PHP below. I would like to enter "Hello, in the main inputbox field" below (You are editing: textfile.txt) and click "SAVE" directly from command line.
Sort of : wput_php "hello, in the main inputbox field" click save, and here is it. the text would be uploaded.
PHP Code:
[Code]....
company has asked to block some pages on google.co.in. i can not block the entire domain.is there any way to block specific webpage like
View 2 Replies View RelatedI vaguely remember that there is a way to store instructions for vim in my file (like tabstop width etc). I'm not speaking of settings in vimrc but of storing those settings with in the file to be edited. That way the tabstop has always the right width even if I transfer this file to another computer. However, I can't remember what the magic word is so that vim picks up those settings when loading the file.
View 1 Replies View RelatedGot 3 computers connected by ethernet to a router modem. At this router modem only port 80 is forwarded to a web server (one of the 3 computers). Now I realized several times a port scanning attack displayed at interactive firewall of Webserver ( Apache at Mandriva LINUX ). Actually the message is port scanning attempt of heanet (actually this names are different mostly). I wonder how to figure out is this portscanning attack possible through port 80 or is the modemrouter (Draytek VIGOR) misconfigured, compromised or one of the other 2 machines (Windows) are compromised and attacking the server inside intranet?
View 2 Replies View RelatedI would like to download a webpage using WGET which needs a form submission (POST method) in order to appear. I can do that with this command.
wget --post-data="computer=hosts&style=list" http://www.example.com
The problem is there is more than one form on the requested page and I dont know how to tell WGET which one should it POST the data to.
1.) Where can I find the setting to change the size and color of the font used for inactive windows?
2.) Where can I change the size of fonts used in webpages? For example, look at the size of the font I see here at this website.
Is there a command line option that will allow less to return to the command line if there are not sufficient lines in the file to warrant paging.
View 1 Replies View RelatedI have a requirement related to the apache access log file format: When a user access my local site, http authentication will be displayed:
Code: username: saagar password: 123 I wish to have the LogFormat in the configuration file in such a way that the username and password (saagar/123 in this case) will be logged in the /var/log/apache2/mysite_access_log file. I used the %u parameter as follows: Code: LogFormat "%h %u "%r" %>s %b" common CustomLog /var/log/apache2/mydreamhome_access.log common and it works, similarly I wish the password too to be displayed in the access_log file.
I have an xml file that is similar to this.Suppose that this file name is Example.
<PMID>10605436</PMID>
<Year>2000</Year>
<ArticleTitle>Steroids</ArticleTitle>
[code]...
I have an security cam with a built-in webpage inside my home network. That camera is using basic HTTP authentication instead of SSL. I want to be able to access the camera's webpage from outside my network, but I don't want to open an unencrypted video stream to the outside world. Right now, I'm doing some cumbersome ssh tunneling where I bounce off an ssh server like: ssh -N -L 9090:[URl]..and then I connect to my web page like: http://localhost:9090
But this is a pain. Now, gentle reader, I beseech you to tell me how I can use linux (Ubuntu) to get a fully encrypted SSL connection to my internal web page without the hassle of creating an ssh tunnel each time. I believe I can use stunnel, but I'm not sure of the command.
I am using Squid Server from last 5years. There is a site "http://www.firstflight.net", which was accessible before few days but now I am unable to access this site. If I use IE8 then getting below error:
"Internet Explorer cannot display the webpage"
Or using Google chrome getting error:
"This webpage is not available The webpage at http://www.firstflight.net/ might be temporarily down or it may have moved permanently to a new web address. Error 330 (net::ERR_CONTENT_DECODING_FAILED): Unknown error."
But other sites are working fine..