General :: Loose An Hour Every Time Reboot PC?
Aug 8, 2010
I was wondering if any one came across that issue before. Everytime I reboot my PC something (I assume GNOME) reset my system clock to an hour behind what is was the last time. So if a reboot twice in a row that'll be two hours behind and so on. It used to work fine until I had to change my system time backward temporally to overcome and issue with GPG. Since I put it back I get that phenomena. It's like it's adjusting it for the Day light saving everytime a boot. Problem is Japan does not have any day light saving. I run OpenSuse 11.2 with Gnome 2.28.2 as my interface. I'm currently located in Japan GMT+9 not DST. /etc/localtime -> /usr/share/zoneinfo/Asia/Tokyo
I suspect a bug in Gnome or Yast. It's not user specific because the time is already altered even before I log it.
View 13 Replies
ADVERTISEMENT
Jun 17, 2011
I just switched over to Lubuntu, and so far, it's been great.It's rendering quite well with my laptop, even though the fan is constantly running.I've had some small annoyances that I haven't been able to figure out. How do I get the power button and/or other related actions to the 'start' menu? Is there a way to drag and drop applets like in Ubuntu? How do I setup default brightness like in Ubuntu? How do I change the time to normal US time (12 hour instead of 24 hour)How do I change the time to a 12-hour instead of 24-hour?Is there a software center?
View 2 Replies
View Related
Apr 12, 2010
Currently whenever i run date command output is shown like
Mon Apr 12 05:17:21 IST 2010
When its 17:17 Here.
How would i change it so that it should show.
Mon Apr 12 17:17:21 IST 2010
View 9 Replies
View Related
Aug 24, 2011
Is there any way to force 24-hour time in my locale (for example, 14:00) instead of 12-hour time (2:00 PM)?
I use the en_US locale with a UTF-8 character set on Arch Linux, but this shouldn't matter, I think.
View 1 Replies
View Related
Aug 31, 2010
Recently moved into amazon's ec2 cloud and noticed our server time was in UTC where we use EST. I did some looking around, and changed using the following;
Followed up setting the correct time using the date command with the correct time, then date showed;
Now, that is correct, but if I do an ntpdate pool.time.org or any other time server, the offset is huge and the date moves back one hour. Is this a daylight settings or something I am just missing?
View 2 Replies
View Related
Mar 31, 2010
I have cron jobs running and the timing is critical, because I'm running Nessus scans on production servers. If I hit them at the wrong time, I'm toast. But when I check the cron log, I see that it is an hour off. Here is the output for the command "clock":
Wed 31 Mar 2010 03:01:26 PM CDT -0.257677 seconds
And this is the tail of the cron log:
Mar 31 16:00:01 nes-001 CROND[8790]: (root) CMD (/Nessus/Targets/NessusScriptDataCenterScan.test)
Mar 31 16:01:02 nes-001 CROND[8822]: (root) CMD (run-parts /etc/cron.hourly)
Mar 31 16:01:02 nes-001 run-parts(/etc/cron.hourly)[8822]: starting 0anacron
Mar 31 16:01:02 nes-001 anacron[8832]: Anacron started on 2010-03-31
Mar 31 16:01:02 nes-001 anacron[8832]: Normal exit (0 jobs run)
Mar 31 16:01:02 nes-001 run-parts(/etc/cron.hourly)[8834]: finished 0anacron
Cron thinks it is 4:00 p.m., but it's really 3:00 p.m. How do I tell Cron what time it is? (Stopping and restarting the crond service did not change it.)
View 1 Replies
View Related
May 17, 2011
I want to know how to change the Digital Clock panel applet to 12 hour time because the default is 24 hour.
View 4 Replies
View Related
Jul 2, 2011
How do I prevent mplayer from sending e-mail by the time mplayer plays the wave file that speaks the time?
Here is the script I use to speak time. I use my natural voice to record like this:
Code:
Last, but not least, I wrote the script:
Code:
Note that I've commented out /bin/cat as a bandage solution to delete mail after mplayer plays the file. I said "bandage solution" because if I have grayson@ubuntu-server forward mail to my e-mail account through SMTP relay, I'm going to be seeing the e-mail messages sent every hour and I need to stop this from happening in the first place.
Example of the mail I've been getting in /var/mail/grayson:
Code:
View 1 Replies
View Related
Mar 24, 2010
I recently decided to try KDE4 and would like the change the clock on the panel to display 12 hour format and not the default 24hour format but i can not find where to change this option currently the clock looks like the attached picture. Gnome has this option and I would like to see it in KDE if it exists in the default clock. I am willing to replace the default KDE clock with a seperate widget if one exists for this.
View 1 Replies
View Related
Mar 5, 2010
I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb.
The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again.
Is there some good solution to reset the camera without rebooting to make it work again?
View 1 Replies
View Related
Aug 5, 2010
I need to change the time displayed in the task bar from a 24 hour clock to a 12 hour format. I could not find the relevant settings in OpenSuse 11.2 and same is the case for 11.3 as well.
how to make the change? I have tried System Settings ---> Computer Administration ---> Date & Time; but I was not able to make the desired change.
Similarly, I have a digital clock widget that shows GMT + 5.5 hours and I need to change that to 12 hour format as well.
View 3 Replies
View Related
May 16, 2015
if I have to reset my system for any reason or even logging out my pavucontrol resets to my built in audio instead of sticking to my HDMI like I want it to.I can manually configure a file I will, I just need to know where to start.I will provide hardware info when asked for it, just need a feeler here.I am running Debian Jessie KDE 64bit
View 1 Replies
View Related
Jan 6, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code].....
View 9 Replies
View Related
Mar 21, 2010
I am using Ubuntu 9.10. Every time I try to reboot my system it hangs. Shutdowns work properly. I've done multiple re-installations. Nothing I've tried fixes the problem. Does anyone have any suggestions?
View 4 Replies
View Related
Jan 2, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code]....
View 1 Replies
View Related
Jul 15, 2009
I'm running a CentOS 5.2 vm on a W2K8 hyper-v core server. The problem I have is that when I reboot, the system time always resets itself to 6:00 am in the morning. I tried the /sbin/hwclock --systohc command but it hasn't taken hold.
View 1 Replies
View Related
Mar 24, 2010
Is there any possible way I could add loose/strict source routing for traffic originating from a host ? I mean to add certain hops I want my packet to pass.With iproute2 or maybe iptables ?
View 1 Replies
View Related
Jul 21, 2010
I change the audio channels to 6 in alsamixer by choosing my sound card and change the channels to '6ch'. But this setting is not preserved. I see that after a reboot the channels are again going back to 2ch. I have to manually change everytime to 6ch after each reboot. Is there a way to save the setting in alsamixer so that I will get 6ch everytime after reboot? I am not sure I have explained my problem in a way so that you can understand.
View 2 Replies
View Related
Sep 1, 2010
Dual boot system. Boot Linux Fedora 13 and the hardware clock is set to GMT. Boot Windows 7, time is wrong, as it expects the hardware clock to be set to the local time. reset the hardware clock each time I reboot in to the other O/S.
View 5 Replies
View Related
May 26, 2011
I upgraded from fedora 14 to fedora 15 yesterday. I live in India (IST) which is GMT +05:30. Every time I boot, my system clock increases its time by 5 and a half hours. For example, system clock on my machine is now Wednesday May 26,2011 22:44. If I were to reboot now, the time I would get is Thursday May 27, 2011 04:14. How do I correct this?
View 14 Replies
View Related
May 30, 2011
Just installed F15 using preupgrade (from F14) and now, every time I reboot, time jumps backwards 4 hours. If I reboot twice in a row without correcting the time, time will be off by 8 hours. Time zone is set correctly (Eastern Time). "Synchronize date and time over the network" is unchecked.
Since the difference between GMT and Eastern time is 4 hours, there appears to be some confusion over that but I can't find anything in the "Date & Time" app relative to that to try to play with to see if I can correct this. II do remember a similar issue many releases ago but I can't remember how it was dealt with.
Any ideas on how to diagnose and fix this?
View 8 Replies
View Related
Aug 28, 2011
I will open firefox then scroll to file-quit firefox, firefox closes fine but when i want to open firefox again it wont, i have to restrate opensuse 11.4 linux 2.6.37.6-0.7 kde 4.6.0.0.
View 3 Replies
View Related
Aug 17, 2010
Whenever I reboot my server, it looses all network connectivity. It can't see the LAN nor the internet. I have to issue the following:
Code:
ifconfig eth0 down
ifconfig eth1 down
ifconfig eth1 up
This will get the server talking to the LAN, but still not to the internet. To get that I have to do:
Code:
route add default gw 192.168.0.1
Then I'm up and running.
But why?
Granted I only have to reboot now and then (after a power failure, or, like last night where the server was actually heating the house too much on a hot August day) but why is this happening? It is like these settings are temporary and are lost on shutdown.
View 4 Replies
View Related
Sep 1, 2011
Is there a way to determine the time of last reboot and open all sessions and/or files that were open with a BASH script?
Oh also on this topic, does anyone know where a good repository of BASH, PERL and other Linux System Scripts are?
View 3 Replies
View Related
May 9, 2010
I have an indexer for sphinx, and i want it to run once every hour in linux. How would i do this?
View 8 Replies
View Related
May 20, 2011
Yesterday I configured an NTP Server, and synched a sever with my NTP Server. Now some how my Client clock jumped one hour ahead at 12:00 AM, while HW Clock and NTP Server Clock remained.
Code:
cat /etc/sysconfig/clock
# The ZONE parameter is only evaluated by system-config-date.
# The timezone of the system is defined by the contents of /etc/localtime.
ZONE="Asia/Karachi"
[Code]....
View 2 Replies
View Related
Dec 30, 2014
After a sleep resume cycle, my background image is corrupt. It's replace by a weird image.
Before [URL] ...
After [URL] .....
I'm using Debian Jessie, Gnome 3.14.1, Nividia-drvier 340.65-2
The problem was highlight previously [URL] ....
View 0 Replies
View Related
Oct 14, 2009
i have just registered to this forum so forgive me if i ask wrong question at wrong place.i have a server with OS: fedora 7 Hardware: SuperMicro X7DVL-L
[root@ ~]# /sbin/lspci
00:00.0 Host bridge: Intel Corporation 5000V Chipset Memory Controller Hub (rev b1)
00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev
[code]...
View 1 Replies
View Related
Mar 20, 2010
Just got a new toy!
Quote:
Compaq/HP CQ60-615DX Notebook @Best Buy $369.00
Intel Celeron 900 (2.2Ghz)
250GB(7200rpm) HDD
2GB DDR2 SDRAM
8x DVD +/- R/RW Double layer
Win7 Home Premium (for the time being)
[Code]...
I will keep Win7 for clients as this will be another laptop for that usage plus wanting to have a decent laptop for the rec room to do that style of work. Cheap way to service M$ clients without buying more personal license(s). So far no big deal with M$ Win7 but I need to have that pathway available to me.
My reason to buy this notebook rather then a netbook should be obvious, big enough for me to do what is necessary. I've got test beds to do the real work, netbooks just won't meet the needs as describe above. I purchased a Netbook for my wife. That one will be used while she's away to aid with the new Grandchild, a lot easier to carry than her old HP Laptop. If the Netbook is lost then no worry since it's cheaper than her HP.
View 3 Replies
View Related
Jan 30, 2011
When I log onto my 10.04 server via ssh, there is the /etc/motd displayed. This motd is made up each time by the files in /etc/update/motd.d/. There is this one file : update-motd-reboot-required The content is exec /usr/lib/update-notifier/update-mot-reboot-required and the content of this one is : if the file /var/run/reboot-required exists, print it.
But who is making this file and why ?we know who it is: it's pam_motd.. but why would I reboot ??!?
editt2 : nvmd [URL]
View 1 Replies
View Related
