General :: Installing Ubuntu 10.04 Package?
Apr 13, 2011
I was using a 3g iPod nano which was supported by my flavor of Ubuntu . However, recently I have acquired a 4g iPod Touch and to my dismay, it is not supported on my OS. After doing some research, I discovered that Ubuntu 10.04 Lucid Lynx supports all the newer generation Apple products, including my 4g iPod Touch. Is there anyway I can install this package without reformatting my computer COMPLETELY over again? Are there any easier ways to be able to sync my ipod with my computer?
View 5 Replies
ADVERTISEMENT
May 14, 2010
I am using ubuntu for a month. Yesterday i tried to upgrade it from 9.10 to 10.0. Then i had to shut down the pc for electricity failure. After that ubuntu came into halt in boot time and something like recovery shell came. It advised me to use "fsck" and i did that. All were again fine (Except some icon goes from left to right ). Then today i was trying to install "Virtuabox" and it says i need to remove "devicekit-power" package. i did it with synaptic package manager ( with my newbie wisdom , didn't knew it would crample my system ). Then the Empathy gone, shut down button gone ). I then installed some lost package
- gnome power manager
- indicator session
- indicator applet session
but ubuntu-desktop package is not installing. Whenever i try it says to fix broken package and i tried the option in synaptic, but no luck. also tried in recovery mode to fix broken package but it says the same. now i got the empathy and the green sign back ( after installing those 3 package ) but not like it was ( they are now separated , and uglier ). Same problem installing devicekit-power package. it says it is not in repository.
1. Did the 10.0 failure upgrade was behind this thing?
2. Any help installing Virtuabox? it first installs fine ( downloaded deb package ). then it tries to download some extra packages and always fails to download them. tried in command shell as instructed in its website and also treid in ubuntu soft centre but no luck.
3. Is there any way i can install the missing ubuntu-desktop and devicekit thing?
4. Would be very glad if someone tell me about a linux soft that protect my system from my wild exploration and destruction
View 9 Replies
View Related
Dec 29, 2010
I use RHEL 3 , but do not have installed the package for rcp , so now can not receive file via rcp , can advise what package that I need to install for using rcp ?
View 11 Replies
View Related
Aug 3, 2011
I have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
View 1 Replies
View Related
Jan 30, 2010
I have Ubuntu 9.10 installed on my laptop.And I am going to install mediaplayer from its "*.deb" file, But it requires a lot of other packages and each of those packages needs others and so on.Since I do not have internet connection on my Ubuntu and my internet connection is in Win XP, so I should download these packages and then check them in my Ubuntu and see what other packages it needs and download them and so on.
It is a very time consuming task. If I could find out what are all the required packages I could download all of them at once and then I could install them by "sudo dpkg -i *".Therefore I am wondering if there is a way to know which packages are the required ones for a typical package, my work would be much more easier.
View 1 Replies
View Related
Feb 24, 2010
Is there a way to determine which libraries a package needs before installing the package itself?
View 2 Replies
View Related
Mar 13, 2011
OS: Debian testing Is it possible to instruct apt-get to install only some of the files in a package?.Here is the specific problem I'm facing: I have installed latex using the latex installer from CTAN. Now I'd like to install lyx but when apt-get install lyx reports it will install all the deb latex packages (it seems to be unaware latex is already installed). can I instruct apt-get to install only the lyx files with the extra 300MB or so of latex?.
View 3 Replies
View Related
Jun 9, 2011
I have tried to install CentOS about twenty times. Each time it hangs up at package download. I says that file rsh-o,17-40.e15.i386.rpm cannot be oppened Due to a missing file or corrupt package or corrept nedia.
View 4 Replies
View Related
Jul 20, 2011
I've just downloaded a .tgz package to my desktop.
I've run tar zxf filename.tgz
And it's extracted another folder to my desktop.
I have attempted cd into the new created directory and run the following:
But nothing seems to happen, I'm basically trying to install the .tgz package I downloaded
View 8 Replies
View Related
Jan 18, 2010
A while ago (not sure exactly when) my Synaptic Package Manager, Update Manager, Ubuntu Software Center and apt-get install have not been working. When I try to do apt-get install I get this error
[Code]...
View 4 Replies
View Related
Jun 9, 2010
There is something wrong with the nvidia driver installation, but i dont know what is it exactly or how to fix it, when i try to install anything i get this errorinstallArchives() failed: Selecting previously deselected package gnomeradio. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading
View 2 Replies
View Related
Feb 23, 2010
I know it exists for Jaunty, but not Karmic. My question is just simply, how can I download this package, and can I just use Synaptic to install it without any problems? Any detailed documentation about installing "obsolete" packages and their dependencies? Perhaps is there some way to get my system to emulate Jaunty, I can install the package, then go back to Karmic?
View 5 Replies
View Related
Mar 17, 2010
for some reason my system crashed while installing a package. Now I get this error every time I install/remove a package. I have tried re-installing, removing, forcing options, 'dpkg --configure -a', dpkg-reconfigure. Nothing has worked.
Code:
A package failed to install. Trying to recover:
View 2 Replies
View Related
Sep 12, 2010
Initially the sound was working fine in my ubuntu 10.04 lucid. Headphone jack was not working. I downloaded and installed following packages in order to upgrade alsa.
alsa-driver-1.0.15rc3.tar.bz2
alsa-firmware-1.0.15rc1.tar.bz2
alsa-lib-1.0.15rc3.tar.bz2
alsa-utils-1.0.15rc1.tar.bz2
Now there is no sound. Whole system is fried. I don't know what happened.
View 3 Replies
View Related
Feb 5, 2011
This is on a cloud instance of maverick 64bit.In using cloud init to install a package (also does not work manually) I receive the following error.issuing an update with --fix-missing also does not work. I do notice, however this is trying to hit ec2.archive. For iperf I don't know that it needs to be ec2 specific. To my knowledge this worked a few weeks ago. Also, where it is easy enough on a Desktop version of maverick to simply switch sources for the upgrades/updates I have not found how to specify a new url (i.e. Duke University vs. MIT) The repositories I am happy with just the location of the repositories.On this particular cloud image is it even safe to leave ec2 as it is a specialized stripped down image.
View 2 Replies
View Related
Feb 23, 2010
I'm experiencing a strange behavior from apt on my Debian 4 etch installation.
Sometime ago I installed XMailServer on it, and so far so good, it is working quite fine and no issue at all here. However since this installation apt got crazy and now each time I install something else it goes and installs xmail again. This creates the issue that everytime I add or remove a package xmail gets unconfigured and I've to delete spool and recreate the domains.
Sort of:
apt-get install somePackage ....regular messages if something else is needed to be downloaded... then installs xmailserver again for no reason at all giving a whole load of "file already exists" errors while rewrite xmail's config.
Already tried apt-get clean, apt-get autoclean, purge/remove -> reinstall sequence, delete the .deb package from apt's cache. But still no luck, apt insists into reinstall it everytime I want to install anything else.
Any place I can edit to make apt stop doing this?
View 3 Replies
View Related
Oct 5, 2010
I am new to Linux. I need to install a package libstdc++.so.5. I think I would require RPM first in order to get this package installed.
View 6 Replies
View Related
Mar 21, 2010
I am trying to install jdk automatically using kickstart. I have added jdk-6u13-linux-i586.rpm to Server dir (where all rpms exist) and add jdk to %packages section. It always complain jdk is missing. I tried it also with another rpms which are not in the RedHat DVD and it always complatin the the package is missing.
View 4 Replies
View Related
Feb 6, 2010
I am new to ubuntu and would like to play my music library via a program. Was going to just try rhythmbox since it came with the OS, unless someone has another suggestion. When trying to play my mp3s I get a error saying I need to download a plugin which it can't find. I found this link and tried to follow it. [URL]..I was able to install the package on my laptop, but one my desk top when I click on 'Click here to install the ubuntu-restricted-extras package' I get prompted to use 'apturl' which I accept then it says Could not find package 'ubuntu-restricted-extras'.I am connected to my network, shouldn't it just reach out to and grab this?
View 1 Replies
View Related
Jun 1, 2010
I'm using Ubuntu 9.10 Desktop Edition to install DSpace on my desktop. I had install all the JDK,MAVEN,ANT and Postgresql. After i install these prequisites, I start to install DSpace(dspace-1.6.1-release). When i reach mvn pacakge, it will start to download packages. After a few minutes, it will stop on here [as shown below]:
Downloading: [URL] [INFO] Unable to find resource 'org.apache.maven.doxia:doxia-module-xdoc:jar:1.0-alpha-11' in repository java.net [URL] Downloading: [URL]
why it will only stop on this step and can't proceed to download other package? What should I do so that the mvn package can download all the packages that it want?
View 1 Replies
View Related
Jun 3, 2010
I currently using Ubuntu 10.04 LTS.Whenever I try installing any new package(*.deb) it will display red error message that I don't understand.What happen? and how to solve this problem?
View 8 Replies
View Related
Aug 8, 2010
after installing alsa package, i have no sound.
View 1 Replies
View Related
Nov 28, 2010
so i restarted my computer to find that gnome-panel package is gone- dont know how this happened, i use docky which still works and have all my main applications on there so i can run terminal, package manager etc, but the only way i know of connecting to the internet is through notification/indicator applet on gnome-panel and so cant install that package until i get internets, can i sort out an internet connection through terminal or some other way?
View 9 Replies
View Related
Dec 13, 2010
After installing Ubuntu,Firstly i went to the terminal & typed "$ sudo apt-get install Ubuntu Restricted Extras"then i input my password,to installbut sometime later the Ubuntu Restricted Extras Package installation was failed.How can i successfully install Ubuntu Restricted Extras Package?
View 9 Replies
View Related
May 14, 2010
When I write the command "sudo apt-get install dialog". I get this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package dialog is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package dialog has no installation candidate
View 1 Replies
View Related
Jan 2, 2011
Today I tried to install the Tex system on my notebook butI encountered an error during installing texlive-base package
Code:
The following NEW packages will be installed:
texlive-base
[code]....
View 2 Replies
View Related
Aug 16, 2010
When I use YUM to install ICAClient it ends with the following message "Package ICAClient-11.100-1.i386.rpm is not signed" (see the code below). However, when using browser (Nautilus) to start installation of the same ICAClient-11.100-1.i386.rpm it completes with success (see the image below).
This happens when installing with YUM from the CLI:
Code:
[root@nc6000 boris]# yum install /mnt/temp/DAT/software/linux/INSTALL/ICA/ICAClient-11.100-1.i386.rpm
Loaded plugins: downloadonly, fastestmirror, presto, refresh-packagekit, remove-with-leaves, security, show-leaves, verify
Loading mirror speeds from cached hostfile
[Code]....
I prefer using CLI when installing packages. Which options can be use to sign a package during installation with YUM?
View 4 Replies
View Related
Dec 27, 2010
I mean like, what does it do differently from just installing something from source? Check to make sure you have the required dependencies before compiling the .tgz package? something else?
View 12 Replies
View Related
Aug 17, 2010
I am a 'newbie' to ubuntu (with 45+ years as a 'computer nerd'). I am trying to follow the instructions for installing the Flash plug-in so I can view some of the action on webpages. I get on terminal and the prompt is mike@mike-laptop. The instructions say to key in "# rpm -Uvh <rpm_package_file>". I have tried as many variations of this command as I can think of with no response. I am assuming that my interpretation of <rpm_package_file> is incorrect.
View 2 Replies
View Related
Jul 9, 2010
Please tell me the command to install the pstricks package which is being used by TexLive.
View 2 Replies
View Related
