Debian :: How To Get RPM For Installing Package

Oct 5, 2010

I am new to Linux. I need to install a package libstdc++.so.5. I think I would require RPM first in order to get this package installed.

View 6 Replies


ADVERTISEMENT

Debian :: Installing The Mint-meta-debian Package From The Repo?

Apr 14, 2011

Is there stability advantages to installing the mint-meta-debian package from the repo below??? I have read that LMDE is safer than running Testing because there is less chance for breakage with LMDE. Less risky overall. Is that true?

# Linux Mint Debian Edition (I get Firefox from here)
# get the mint-keyring from the repo
deb http://packages.linuxmint.com/ debian main upstream import

View 3 Replies View Related

Debian :: APT Always Installing The Same Package?

Feb 23, 2010

I'm experiencing a strange behavior from apt on my Debian 4 etch installation.

Sometime ago I installed XMailServer on it, and so far so good, it is working quite fine and no issue at all here. However since this installation apt got crazy and now each time I install something else it goes and installs xmail again. This creates the issue that everytime I add or remove a package xmail gets unconfigured and I've to delete spool and recreate the domains.

Sort of:

apt-get install somePackage ....regular messages if something else is needed to be downloaded... then installs xmailserver again for no reason at all giving a whole load of "file already exists" errors while rewrite xmail's config.

Already tried apt-get clean, apt-get autoclean, purge/remove -> reinstall sequence, delete the .deb package from apt's cache. But still no luck, apt insists into reinstall it everytime I want to install anything else.

Any place I can edit to make apt stop doing this?

View 3 Replies View Related

Debian :: Installing Flash Plugin To Terminal - Package Not Found

May 25, 2011

I'm new to this and trying to install flashplugin to the terminal. I entered apt-get install flashplugin-nonfree, and it says package not found. What do i do. I can't install yahoo messenger without it or see any videos on ..... or any thing that requires adobe.

View 14 Replies View Related

Debian :: Installing Kernel Sources - Make Command To Build Package Fails

Jul 22, 2010

I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".

View 3 Replies View Related

Ubuntu Installation :: Installing Package Through Synaptic Package Manager?

Aug 3, 2011

I have a problem when installing this package through synaptic package manager. this is :

libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.

View 1 Replies View Related

Ubuntu :: Way To Determine Which Libraries Package Needs Before Installing Package Itself?

Feb 24, 2010

Is there a way to determine which libraries a package needs before installing the package itself?

View 2 Replies View Related

Debian Configuration :: Additional Settings After Installing "pulseaudio" Package?

Aug 31, 2011

I'm running squeeze. I installed from the netinstall cd (graphical install). I need to get pulseaudio, so here is my question: Is there any additional configuration you need to do after installing the "pulseaudio" package. (to integrate with alsa, gnome integration, multimedia keys etc.)?

View 3 Replies View Related

Debian Configuration :: Package-xy: Depends: Lib-something (>= Version_number) Which Is A Virtual Package

Nov 4, 2010

when I try to install a package, I've the message The following packages have unmet dependencies:package-xy: Depends:lib-something (>= version_number) which is a virtual package.

View 14 Replies View Related

Ubuntu :: Installing Tgz Package ?

Jul 20, 2011

I've just downloaded a .tgz package to my desktop.

I've run tar zxf filename.tgz

And it's extracted another folder to my desktop.

I have attempted cd into the new created directory and run the following:

But nothing seems to happen, I'm basically trying to install the .tgz package I downloaded

View 8 Replies View Related

General :: Installing The Package For Rcp?

Dec 29, 2010

I use RHEL 3 , but do not have installed the package for rcp , so now can not receive file via rcp , can advise what package that I need to install for using rcp ?

View 11 Replies View Related

Red Hat :: Installing Package Not In DVD Using Kickstart

Mar 21, 2010

I am trying to install jdk automatically using kickstart. I have added jdk-6u13-linux-i586.rpm to Server dir (where all rpms exist) and add jdk to %packages section. It always complain jdk is missing. I tried it also with another rpms which are not in the RedHat DVD and it always complatin the the package is missing.

View 4 Replies View Related

Fedora :: Sign A Package When Installing With Yum?

Aug 16, 2010

When I use YUM to install ICAClient it ends with the following message "Package ICAClient-11.100-1.i386.rpm is not signed" (see the code below). However, when using browser (Nautilus) to start installation of the same ICAClient-11.100-1.i386.rpm it completes with success (see the image below).

This happens when installing with YUM from the CLI:

Code:
[root@nc6000 boris]# yum install /mnt/temp/DAT/software/linux/INSTALL/ICA/ICAClient-11.100-1.i386.rpm
Loaded plugins: downloadonly, fastestmirror, presto, refresh-packagekit, remove-with-leaves, security, show-leaves, verify
Loading mirror speeds from cached hostfile

[Code]....

I prefer using CLI when installing packages. Which options can be use to sign a package during installation with YUM?

View 4 Replies View Related

Ubuntu :: Package Manager And Installing

Jan 18, 2010

A while ago (not sure exactly when) my Synaptic Package Manager, Update Manager, Ubuntu Software Center and apt-get install have not been working. When I try to do apt-get install I get this error

[Code]...

View 4 Replies View Related

Ubuntu :: Error While Installing A Package?

Jun 9, 2010

There is something wrong with the nvidia driver installation, but i dont know what is it exactly or how to fix it, when i try to install anything i get this errorinstallArchives() failed: Selecting previously deselected package gnomeradio. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading

View 2 Replies View Related

General :: Installing Only Some Of The Files From A Package?

Mar 13, 2011

OS: Debian testing Is it possible to instruct apt-get to install only some of the files in a package?.Here is the specific problem I'm facing: I have installed latex using the latex installer from CTAN. Now I'd like to install lyx but when apt-get install lyx reports it will install all the deb latex packages (it seems to be unaware latex is already installed). can I instruct apt-get to install only the lyx files with the extra 300MB or so of latex?.

View 3 Replies View Related

General :: Installing Ubuntu 10.04 Package?

Apr 13, 2011

I was using a 3g iPod nano which was supported by my flavor of Ubuntu . However, recently I have acquired a 4g iPod Touch and to my dismay, it is not supported on my OS. After doing some research, I discovered that Ubuntu 10.04 Lucid Lynx supports all the newer generation Apple products, including my 4g iPod Touch. Is there anyway I can install this package without reformatting my computer COMPLETELY over again? Are there any easier ways to be able to sync my ipod with my computer?

View 5 Replies View Related

Slackware :: Exactly Does A Slackbuild Do (aside From Installing A Package)?

Dec 27, 2010

I mean like, what does it do differently from just installing something from source? Check to make sure you have the required dependencies before compiling the .tgz package? something else?

View 12 Replies View Related

Fedora :: Command For Installing PSTricks Package

Jul 9, 2010

Please tell me the command to install the pstricks package which is being used by TexLive.

View 2 Replies View Related

OpenSUSE :: Installing RPMs Elsewhere - Package Not Relocatable

Jul 19, 2010

I can use KRPMview or midnight commander to see what's in an RPM, fine. I might want to inspect a file inside an RPM or actually install some of its files but this latter might upset already installed files. Or, it is so dependent on something else being previously installed. Therefore I need to install it elsewhere, take a look at he file content and/or copy, it to where I want.

There are options: --badreloc --prefix --relocate --nodeps --ignoreos --force

Some are mutually exclusive but the result is it still tells me - package not relocatable. Is there any other magic incantation or do I need to do some time-consuming backup, run the RPM install and any deps hell, do my intended thing, then another time-consuming restore? Or maybe set up a partition with a suitable suse version and just run the RPM there and then copy over?

View 4 Replies View Related

OpenSUSE Install :: Installing The Package With Zypper?

May 4, 2010

I have minimal open suse installed as a server and now i would like to install some packages with zypper and it always download some packages related to X11 and gnome but I want to ignore that.Is it possible some how that I can define a USE flag for that like -X -gnome?

View 1 Replies View Related

Ubuntu :: Installing Libgtk1.2-dev Package In Karmic?

Feb 23, 2010

I know it exists for Jaunty, but not Karmic. My question is just simply, how can I download this package, and can I just use Synaptic to install it without any problems? Any detailed documentation about installing "obsolete" packages and their dependencies? Perhaps is there some way to get my system to emulate Jaunty, I can install the package, then go back to Karmic?

View 5 Replies View Related

Ubuntu :: System Crashed While Installing A Package

Mar 17, 2010

for some reason my system crashed while installing a package. Now I get this error every time I install/remove a package. I have tried re-installing, removing, forcing options, 'dpkg --configure -a', dpkg-reconfigure. Nothing has worked.

Code:

A package failed to install. Trying to recover:

View 2 Replies View Related

Ubuntu :: No Sound After Installing ALSA Package

Sep 12, 2010

Initially the sound was working fine in my ubuntu 10.04 lucid. Headphone jack was not working. I downloaded and installed following packages in order to upgrade alsa.
alsa-driver-1.0.15rc3.tar.bz2
alsa-firmware-1.0.15rc1.tar.bz2
alsa-lib-1.0.15rc3.tar.bz2
alsa-utils-1.0.15rc1.tar.bz2
Now there is no sound. Whole system is fried. I don't know what happened.

View 3 Replies View Related

Ubuntu Servers :: Installing Package On Ec Image

Feb 5, 2011

This is on a cloud instance of maverick 64bit.In using cloud init to install a package (also does not work manually) I receive the following error.issuing an update with --fix-missing also does not work. I do notice, however this is trying to hit ec2.archive. For iperf I don't know that it needs to be ec2 specific. To my knowledge this worked a few weeks ago. Also, where it is easy enough on a Desktop version of maverick to simply switch sources for the upgrades/updates I have not found how to specify a new url (i.e. Duke University vs. MIT) The repositories I am happy with just the location of the repositories.On this particular cloud image is it even safe to leave ec2 as it is a specialized stripped down image.

View 2 Replies View Related

Applications :: Installing Package Fails Dependencies

Feb 8, 2011

I'm trying to install a package which is failing these dependencies:

[code]...

I downloaded Gnome2-GConf-1.044.tar.gz and I installed it, but I still the package fails the dependencies, even Gnome2::Gconf. What I can do?

View 3 Replies View Related

General :: Ubuntu-desktop Package Is Not Installing?

May 14, 2010

I am using ubuntu for a month. Yesterday i tried to upgrade it from 9.10 to 10.0. Then i had to shut down the pc for electricity failure. After that ubuntu came into halt in boot time and something like recovery shell came. It advised me to use "fsck" and i did that. All were again fine (Except some icon goes from left to right ). Then today i was trying to install "Virtuabox" and it says i need to remove "devicekit-power" package. i did it with synaptic package manager ( with my newbie wisdom , didn't knew it would crample my system ). Then the Empathy gone, shut down button gone ). I then installed some lost package

- gnome power manager
- indicator session
- indicator applet session

but ubuntu-desktop package is not installing. Whenever i try it says to fix broken package and i tried the option in synaptic, but no luck. also tried in recovery mode to fix broken package but it says the same. now i got the empathy and the green sign back ( after installing those 3 package ) but not like it was ( they are now separated , and uglier ). Same problem installing devicekit-power package. it says it is not in repository.

1. Did the 10.0 failure upgrade was behind this thing?

2. Any help installing Virtuabox? it first installs fine ( downloaded deb package ). then it tries to download some extra packages and always fails to download them. tried in command shell as instructed in its website and also treid in ubuntu soft centre but no luck.

3. Is there any way i can install the missing ubuntu-desktop and devicekit thing?

4. Would be very glad if someone tell me about a linux soft that protect my system from my wild exploration and destruction

View 9 Replies View Related

Software :: Gdk-pixbuf-2.0 Package Not Found When Installing Gtk+-2.22.1?

Dec 2, 2010

I am trying to install the gtk+ package so that i can install grapher which require gtk+-2.0

When I ./configure gtk+ I get this (lots of output before what I pasted):

configure: error: Package requirements (glib-2.0 >= 2.25.10 atk >= 1.29.2 pango >= 1.20 cairo >= 1.6 gdk-pixbuf-2.0 >= 2.21.0) were not met:

No package 'gdk-pixbuf-2.0' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.

Alternatively, you may set the environment variables BASE_DEPENDENCIES_CFLAGS
and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.

How/where can I find this package. I tried the usual apt-get to no avail.

View 1 Replies View Related

Software :: Installing Package X Needs 84MB On The /filesystem?

Jan 4, 2011

While installing an RPM x, it gave the error message as shown in subject. I used "df -m" and found the /filesystem has 406MB available space.

View 5 Replies View Related

Software :: Mockbuild Does Not Exist - Installing Rpm Package

Apr 28, 2010

I am following this instructions:

Code:

[URL]

I have downloaded the following kernel:

kernel-2.6.18-164.15.1.el5.src.rpm

I have done the following steps:

As root, install the packages rpm-build, redhat-rpm-config and unifdef:

Code:

[root@host]# yum install rpm-build redhat-rpm-config unifdef

As an ordinary user, not root, create a directory tree based on ~/rpmbuild:

Code:

[user@host]$ cd
[user@host]$ mkdir -p rpmbuild/{BUILD,RPMS,SOURCES,SPECS,SRPMS}
[user@host]$ echo '%_topdir %(echo $HOME)/rpmbuild' > .rpmmacros

However, when I try and install the rpm package:

Code:

[user@host]$ rpm -ivh kernel-2.6.18-164.15.1.el5.src.rpm | 2>&1 | grep -v mockb

I get the following error:

Code:

warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved