I mean like, what does it do differently from just installing something from source? Check to make sure you have the required dependencies before compiling the .tgz package? something else?
View 12 RepliesI'm looking for a VNC solution with the RENDER extension. TigerVNC seems to do what I want, but I have only found precompiled packages for Debian.
View 2 Replies View RelatedIs anyone aware of a package or SlackBuild of Klamav (not Clamav) for Slackware64?
View 4 Replies View RelatedI am trying to build ORBit2 as a dependency for GConf and then google-chrome.
This is a multilib system and I want 32 bit chrome.
Both my 64 bit and compat32 packages are all current as of today per ftp://slackware.mirrors.tds.net/pub/slackware/.
I have edited the Slackbuild as follows:
Code:
The build fails each time with:
Code:
I am using the newest version of ORBit2 as the above indicates, but this is just to see if the newer package would build. The X.X.17 version failed with the same output.
I have run:
Code:
I've had no problems building this package with current in a pure 64 bit environment.
I don't use wireless tools myself currently, since I'm wired to the internet; but, I found that a package I wanted to build, required at the least, a shared version of libiw, if not both the shared AND static version. Symptoms of when you are in this boat, are error messages during compiling, similar to:
Code:
/usr/lib64/libiw.a(iwlib.so): In function `iw_mwatt2dbm':
iwlib.c:(.text+0x1a77): undefined reference to `log10'
iwlib.c:(.text+0x1a84): undefined reference to `ceil'
/usr/lib64/libiw.a(iwlib.so): In function `iw_freq2float':
iwlib.c:(.text+0x1b11): undefined reference to `pow'
[Code]...
How do I open opera in slackware after installing it from slackbuild.
View 3 Replies View RelatedI have HandBrake 0.9.4 installed from Slackbuilds.org, but a new version came out yesterday that I want to install, but it isn't up on slackbuilds yet. Can I install it from source without doing anything to the old install?
When I installed it from slackbuilds, the slackbuild script also installed all the external multimedia libraries that I need. If I use removepkg (or whatever the command is) to remove the old HandBrake before installing the new one, will that also remove the multimedia packages that were installed along with handbrake? They were all built into the same .tgz
On my work computer so I can't do anything with it right now anyway, so maybe a slackbuild will be up when I get home.
For the last couple of weeks, I can't seem to reach [URL]... Browser just times out. Here's a traceroute: [URL]...
View 10 Replies View RelatedI am going to try out a tiling wm and I have narrowed my search down to scrotwm and dwm. I installed scrotwm from slackbuilds.org but it did not show up as a selection when I ran xwmconfig? Any ideas as to why? So then I went install dwm from slackbuilds.org but saw there was only a build script for slackware 13 as opposed to 13.1 which is what I am running. So two questions for dwm, one why is there no slackbuild for 13.1, and two when I tried to use the slackbuild for 13 this also didn't show up under xwmconfig, any thoughts?
View 4 Replies View RelatedAs always, very impressive effort from Slackbuilds.org to get slackbuild scripts updated for 13.1. Thanks to all who maintain these scripts. One which does not seem to have made it to 13.1 so far is a build script for WINE. Anybody know whether this is beacuse of some problem ? Or just an oversight ? The 13.0 script is there - might be OK to just use this with 13.1 ?
View 9 Replies View RelatedGetting the hang of diff and patch, to a small extent...However, I couldn't get the slack-desc to print anything useful when running installpkg. Always had trouble with the slack-desc files.
[code].....
i keep getting this error during gecko-mediaplayer build running 1337 stable up to date. lang.sh has en us utf8 enabled, (it didn't work with en US either.
[Code]...
it seems that there is no x11vnc slackbuild on sbo for 13.1. just wondering if there is something else people use to share the :0 desktop, or should i start looking into the 13.0 slackbuild
View 4 Replies View RelatedAt least, that is what I think happened.I was interested in trying out tilda, which needs the confuse libary, both of which are slackbuilds on slackbuilds.orgI built and installed confuse, and then went to build tilda but got some error I could not follow up on.However after this, nothing as a normal user would work!For some reason my libary directories, /lib64, /usr/lib64 and other key directories such as /usr/share and /usr/bin were set to have permissions 700It took me a while to figure out what was causing the problem.Can anyone confirm that the confuse slackbuild resets your permissions like this? Otherwise, what could have caused it?Can someone please give me the correct permissions for those direcories? Is it safe to just do chmod -R 755 /usr and /lib64?
View 14 Replies View RelatedI'm trying to install OpenShot for the second time. I was originally trying to make a slackbuild for this, when a new one appeared in SBo. It does not work for me, however. It seems that it has to run a python install script and this fails. The package then complains that it cannot find the mlt python bindings.
View 13 Replies View RelatedI have downloaded the source package and the slackbuild package for OpenOffice 3.2.0.Everything seems to go well until doinst, then I get error messages about zero length files:
Code:
install/
install/slack-desc
[code]...
Im trying to recompile glibc from a working slackware-current system using source from a slackware mirror. I'm doing it for testing purpose only. Never done that before, so i'm not sure if i'm doing it right. I get the following error:
Code:
make[2]: Entering directory `/glibc-tmp-a44be92860d34519b0c9a4500878e2e6/glibc-2.11.1/iconvdata'
../Makeconfig:85: ../i486/config.make: No such file or directory
/bin/sh: line 0: cd: ../i486: No such file or directory
The GNU C library has not been configured.
[code].....
I have the latest fbreader.Slackbuild via sbopkg. The compilation steps seem to run OK until, if I understand this correctly, it starts work on libzlcore, at which point things go wrong :
Code:
OK
The README says I will need liblinebreak, which I "Slackbuilt" with no problems.
I used the fbreader.SlackBuild in a 64bit system to create a package and I got some libraries installed under /usr/lib instead of /usr/lib64. FBReader seems to work fine though, so I'm not sure this is a problem. I guess it could be if some other app looks for those libraries. Just thought I should report it anyway.
I used UI=gtk if it matters.
Quote:
Trying to build ffmpeg in 13.37 but it fails with the rror above.
Any links to a guide for building a slackbuid script?[URL]SlackBuild_Script don't show nothing!
View 13 Replies View RelatedTried to compile kbluetooth using the SlackBuild and it was going well until it got to here,
[Code]...
The script was ran using Slackware64 13.37 and the 2.6.38.4 kernel. I've googled around and searched here, but haven't found anything "current" on the such a problem.
If 13.1 and KDE 4.4.3 aren't new enough for anyone, I've just successfully built and installed KDE 4.4.4 with the slackbuilds for 4.4.3. I had to edit the Slackbuild for kdenetwork by commenting out the line that patches the source. Other than that everything seems to be fine, although I don't know yet if this is a good thing or a bad thing since I've just got it installed.
View 14 Replies View RelatedAnyone knows a slackbuild for netbeans 6.8 for slackware64?
View 5 Replies View RelatedI was trying to install the HandBrake slackbuild. It gave me an error saying it needed webkit, so I check for it in slackbuilds.org, where I found it. Listing said it required two things: libsoup and icu4c. So I downloaded the slackbuilds for those two and they installed fine, then started the install for webkit.
It did its build thing for about ten minutes, then it errors out, but the error message is pretty convoluted so I'm not sure what its telling me. Here's the last few lines from the terminal:
[Code]...
Anyone know what went wrong, and what I need to do to fix this?
I downloaded the slackbuilds openoffice.org files, extracted them, added the original source, ran chmod +x openoffice.org.SlackBuild, ran ./openoffice.org.SlackBuild, then found the resulting .tgz and installpkg'ed it. I was able to get through all of the steps listed without any error messages and everything seemed to be going well. However, now when I navigate to opt/openoffice.org3 (the created folder) and attempt to run any of the programs from kde nothing happens. When I attempt to run them in terminal I get the following message:
root@slacktop:~# soffice
/usr/bin/soffice: line 98: /opt/openoffice.org3/program/../basis-link/program/pagein: No such file or directory
/usr/bin/soffice: line 104: /opt/openoffice.org3/program/../basis-link/ure-link/bin/javaldx: No such file or directory
/usr/bin/soffice: line 129: /opt/openoffice.org3/program/soffice.bin: No such file or directory
is there some reason these files wouldn't be in there after a normal installation? I read the howto on slackbuilds.org several times to make sure I got all the steps right, and have tried uninstalling with removepkg and reinstalling and the same thing keeps happening.
On my ubuntu system when I was editing pdf files I used PDF-ShufflerSo now I wrote a slackbuild script for my slackware 13 (xfce)To be more specific, I dont know how to write a slackbuild script so I try to edit the pyPdf.SlackBuild script, hopefully it works! So I want to give it in public view maybe someone need it some time.
Code:
Homepage:
http://pdfshuffler.sourceforge.net/
[code]....
Running Slackware64-13.1; installed the SlackBuild Blender and I changed the last line in SlackBuild script to .txz everything seems fine. Now I'm looking at FlashPlayer SlackBuild, noticed the last line is .tgz? Just want to make sure I am supposed to be changing the last script line .tgz to .txz?
View 5 Replies View RelatedWhere do slackbuild scripts put all their stuff? Because I was compiling QT4 with a slackbuild script and after like 10 years it finally got to the end I think and it was creating the tar.gz file in /tmp I think and then my stupid athlon overheated and my computer turned off. So I got an air compressor and blew all the dust out of the cooling fins and started over. But the script started completely over from the beginning like it hadn't done it all already.
My athlon's overheated before when compiling manually and when restarting make just skips all the files it already compiled. I wonder the slackbuild script doesn't do that.
can some one send me the slackbuild for openoffice 3.2.0?
View 2 Replies View Related