When I write the command "sudo apt-get install dialog". I get this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package dialog is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package dialog has no installation candidate
I'm trying to install the nautilus-dropbox plugin for dropbox on my CentOS 5.5; while configuring, there is the following error message:
checking pkg-config is at least version 0.9.0... yes
checking for NAUTILUS... yes
checking for GLIB... yes
checking for python... /usr/bin/python
[code]....
But I think I have already installed pygtk2, as shown by yum:
Installed Packages
pygtk2.x86_64 2.10.1-12.el5 installed
pygtk2-codegen.x86_64 2.10.1-12.el5 installed
[code]....
So does the error message means that it requires pygtk rather than pygtk2?
Package dialog is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source.E: Package 'dialog' has no installation candidate < ERROR > Installation failed, please check the terminal output.
View 7 Replies View RelatedI have 9.10 at work and at home. At home it was installed from scratch. At work it's upgraded from 8.10->9.06(?)->9.10
- At work, when I do something over ssh, like subversion, and I have a key for that host, i am presented with a nice dialog box for my ssh key. and that's it. for the rest of my uptime, i can ssh to places without any hassle.
- At home, I'm presented with the key input prompt on the terminal. Even If I manually start ssh-agent, it still happens.
What package am I missing? I have the ssh-askpass-gnome on both.
I tried Wubi, and all is fine, but when I choose Ubuntu on the boot menu, it shows some dialog, then just blank. its stays blank forever, so I had to shut the computer off.Then, I burned the Ubuntu iso to a CD and botted from it at startup. This at least showed the purpl-ish install screen. After I pressed enter over install, it went to the blank screen again. just black, nothing appeared.I'm not sure what the problem is. My laptop is fairly new, it shouldnt be having an issue to run it.I have 4Gb RAM, plenty of space on the hard drive, and a 1Gb video card...I have no clue what to do, as this is my first encounter with an Linux distro ever. help?
View 6 Replies View RelatedHow to properly integrate these RPMs into our system?
Option 1: we could take those missing OS RPMs and install them?
Option 2: can we package the missing files from missing OS RPMs into the existing Linux-xxx.rpm?
I have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
When i try installing anything i get errors, for example when i try to install somthing from ubuntu software center i get this.
Code: installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package ttf-symbol-replacement. (Reading database ... dpkg: warning: files list file for package `libsdl-image1.2' missing, assuming package has no files currently installed.
[Code]....
Is there a way to determine which libraries a package needs before installing the package itself?
View 2 Replies View Relatedfind out what packages from Yum will satisfy these two dependencies? I have search and can't seem to find them. I know there are integrated or slipped into some larger package because when I do a fresh install and customize my packageelection to include 'everything', it then installs this RPM with out any issues.
Code:
[root@vbox1 ~]# rpm -ivh VirtualBox-3.2-3.2.8_64453_rhel5-1.x86_64.rpm
warning: VirtualBox-3.2-3.2.8_64453_rhel5-1.x86_64.rpm: Header V4 DSA signature: NOKEY, key
[code]...
I'm trying to use a bibtex style file from the texlive-publishing package, but bibtex cant seem to find the .bib file even though I've tried everything from placing it in the same directory to exporting the BST to:
export BSTINPUTS=/usr/share/texmf-texlive/bibtex/bib/IEEEtran/
But bibtex still cant find my file.
I've been searching for a whole day this package, but yum couldn't find it and even googling it I can only find debian packages for that. Does anyone know how to find it in .rpm?I need it for compiling the vpnc client with openssl (still wondering why the ssl certification was excluded in the in-built package) because without it I get errors.
View 5 Replies View Relatedhow do i install and update the antivirus? i downloaded it using ubuntu geek help but the console is saying the package is missing.
View 8 Replies View Related1) I have micromax 372g usb modem(3g).. but it is not being connected ubuntu 10.10
2) I suppose my device is being recognized and I tried this method [URL] but when I tried to install, it said that package missing for wvdial.
What should I do. Where can I get this package and how can I install it (with no dependany check). My life is extremely difficult without internet on ubuntu, I am ready to give any other information that u need. I have ubuntu 10.10 maverick dual boot with windows. And yes take into consideration that I don't have internet on ubuntu. So provide me full detail how to install it from other media and commands to execute them.
I am running 32-bit Ubuntu 10.04. I just installed KStars and am having a problem. There are no scopes listed in Telescope Wizard. Is it a missing package?
View 5 Replies View RelatedToday is my first day to use ubuntu for my C++ programming. However, when I was trying to install build-essential, it failed. This is the output shown:
vie@vie-laptop:~/TestC++$ sudo apt-get install build-essential
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package build-essential is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package build-essential has no installation candidate
vie@vie-laptop:~/TestC++$ .....
I have been attempting to compile lmms on my 64 bit install of fedora 11, and have determined that I need the gcc-devel package. I cannot find it in any of the repositories. Where is it?
View 10 Replies View RelatedI am currently using SUSE ENT x64 v11 SP1. While trying to install various packages I keep getting dependencies error. I tried reinstalling the rpm packages(listed below) and use various versions but seems like no matter what I try it doesn't go away.
Code:
--> Missing Dependency: liby2storage.so.2()(64bit) is needed by package smis-providers-1.0.0-10.29.x86_64 (installed)
Error: Missing Dependency: librpmio-4.4.so()(64bit) is needed by package libsnmp15-5.4.2.1-8.1.x86_64 (installed)
Error: Missing Dependency: librpmio-4.4.so()(64bit) is needed by package kdebase4-SLED-11-25.1.x86_64 (installed) .....
Code:
rpm-python-4.4.2.3-37.2
rpm-4.4.2.3-60.2
rpm-32bit-4.4.2.3-37.8
deltarpm-3.4-103.22
rpm-devel-4.4.2.3-27.1
no broken libs or whatsoever. What am i missing here?
I thought I knew what I was doing, just a minimal install of slackware 13.1 for a game server (minecraft), but it seems I missed java or something - I get the "command not found" error. gcc-java is installed. What package did I miss/what series is it in? Does it have any dependencies?
View 1 Replies View RelatedI upgraded to the latest -current just like always. I do the kernel packages last. This time, the machine failed to boot, telling me that it could not find the kernel modules. Well, rats.
I booted with a slackware dvd, passed the huge.s kernel, and booted into /dev/sda7, which is my main partition. I mounted /dev/sda7, and installed the kernel-modules-2.6.35.11 pkg. Rebooted, and got the same error?
I booted again with the dvd, mounted the partition, and navigated to /lib/modules - no 2.6.35.11 in there!
How do I get that package to install?
I was trying to setup a cross-platform development environment with qt, an thus looked for the qt-sdk package I used to install on my 32-bit machine.This package appears to have been deleted from 64-bit ubuntu maverick, but I do not understand the details...
- Has this package been renamed, or is there another one in place of it?
- Is this package going to be available again in the future?
PS: I am aware that one can install the sdk by downloading the installer, but for unattended install I prefer the apt package...
am trying to install oracle 10g on my redhat 5.9 which is on vmware 7.0. I follow an installation guide from oracle which instructed me to install some package to enable oracle installation when run ./runInstaller and to install oracle it later tell me gcc-3.2 package is missing when checking for package requirements for oracle I down loaded the gcc-3.2. rpm package and tried to install it this is what happens
[Code]....
I Recently set up a dedicated server using CentOS as a new Linux wing of my Web services hosting business. To provision online varios Tucows services (names, blogs etc.) I need to use the Perl API provided by Tucows/OpenSRS. The API requires various extra perl modules including XML::Parser - without which the API will not function.
I was able to add with PPM to my Windows servers no problem but it will not install in CentOS.
As best I can tell the cause may be missing headers and libs for the c compile of Expat - required to build XML::Parser so after days of hunting I found your repository holds package expat-devel which claims to hold libs and headers for Expat similar to libexpat1-dev on other dists. I used YUM with success but although 3 libs were installed no headers were installed.
Is there a reason these headers are not included? I have downloaded them manually but am afraid of breaking something. Is there a reason I should not attempt to install with these headers? Is CentOS capable of using the Parser modules?
I have a CentOS release 5.5 (Final) box and can't find the kinit command.
I installed the krb5-workstation package which lists the program as one of its contents, but it does't come with it.
Here is the output for yum info krb5-workstation
Name : krb5-workstation
Arch : x86_64
Version : 1.6.1
Release : 36.el5_5.4
Size : 1.7 M
Repo : installed
Summary : Kerberos 5 programs for use on workstations.
URL : http://web.mit.edu/kerberos/www/
License : MIT, freely distributable.
Description: Kerberos is a network authentication system. The krb5-workstation
: package contains the basic Kerberos programs (kinit, klist, kdestroy,
: kpasswd). If your network uses Kerberos, this package should be
: installed on every workstation.
I'm trying to install freeside, a perl based web application using the provided rpms & yum installation instructions.
It won't proceed because of missing dependencies and ends with the following:
Anyone know if a more complete poppler-devel can be found for CentOS 5.5? There seems to be an enormous number of missing files from poppler-devel (page.h and PDFDoc.h are just two examples) resulting in applications that require it refusing to compile.
View 2 Replies View RelatedI am using xfce in squeeze and I like xfce4-governor-plugin. But this package is missing in debian, pls can you add this plugin to squeeze repository. xfce4-governor-plugin_0.1.0 works in squezze very well.
View 1 Replies View Relatedmy update today failed, because the packages raydium and maniadrive depend on libphp5-5.2.9.so, which is provided by php-embedded, which is (apparently) not in the fedora 64bit repository There does however seem to be an i586 version...
View 2 Replies View RelatedI'm having troubles running systemtap scripts. It fails to run with message:
Code:
Checking "/lib/modules/2.6.33.3-85.fc13.i686/build/.config" failed: No such file or directory Ensure kernel development headers & makefiles are installed.
Then I typed:
Code:
$rpm -q kernel kernel-devel kernel-debuginfo
kernel-2.6.33.3-85.fc13.i686
kernel-devel-2.6.33.5-124.fc13.i686
kernel-devel-2.6.33.6-147.fc13.i686
package kernel-debuginfo is not installed
So no kernel-debuginfo, a package which I cannot find in repo. So where to get it and why it's not included in default installation if SystemTap is. It's like having Apache without tcp/ip stack.
I've got Debian Sid x64 on my machine. Problem is that in my KDE setup several programs don't work, namely System Load Viewer plasmoid, plasmoid with temperature info and update-notifier-kde. System Load Viewer always shows 0% RAM and swap usage, as well as no processors, temperature sensors plasmoid shows no sensors available even after I installed lm-sensors and run sensors-detect, update-notifier-kde doesn't show any notifications even if I run aptitude update manualy. I might be mistaken but it seems to me that these three programs are not working because of some common reason, most likely some policy package either missing or misconfigured, but I can't figure out what is it.
View 4 Replies View Related