General :: Install DFlib 8 On Server But It Is Not Working?
Dec 21, 2010i am trying to install DFlib 8 on my server but it is not working for me i try doing
[Code]...
ADVERTISEMENT
Ubuntu :: Server Was Set To Automatically Install Updates, And Stopped Working While Was Away?
Jul 1, 2011My server was set to automatically install updates, and stopped working while I was away. When I got back to it, it now has a boot menu to choose between kernel versions, with no default or timer. So I pick one, and there are heaps of other problems. the /home partition isn't mounting, despite the fstab being unchanged. I can mount it manually using mount with no problems /var/syslog has nothing since April, and isn't updating when I reboot, so I'm not sure what I can cut and paste to here for you all to look at. The networking isn't running, in fact, most of the network interfaces aren't even showing up.That's just what I've identified so far. I have no idea where to start. I can't find anything wrong other than the fact it's not working.I can't copy and paste any output at this point, because I can't ssh,
View 3 Replies View RelatedUbuntu Networking :: After A Fresh 11.04 Install DHCP Server Not Working?
Aug 1, 2011After a fresh install of Ubuntu 11.04 (from 10.04) and spending several hours trying to figure out why the ad-hoc connection between my two computers (Fedora14 <-> Ubuntu 11.04) no longer worked - it had worked fine for almost 2 years with 10.04 - I've finally concluded it was a DHCP problem. This realisation (which was slow in coming!) dawned on me when I reversed my setup and configured the Fedora box as the DHCP server and everything was suddenly working perfectly! A quick internet search threw up an installation file called "isc-dhcp-server" which other Ubuntu 11.04 - related forums are also complaining about. My problem is that this file, although available in the repository, is not even installed!!!
It seems unlikely that the developers forgot to include DHCP support, so I hope someone can point me in the right direction.
OpenSUSE Install :: Configure To The Server And Gateway - Internet Stops Working
Feb 6, 2010i did install opensuse and everything ok; i did configure it to be the server and gateway for a little office network Everything seems to be ok most of the time but sometimes (usually between 5 and 7 pm each day) internet stops working and there is no way to let it start again. So i turn off the suse, switch all cables to the old fedora server, just turn it on fedora and internet works. Turn off fedora, connect suse, let it start and everythng ok...it happens all the times
View 9 Replies View RelatedGeneral :: How To Get Motion Working With Ftp Server
Jul 24, 2011have tried changing the config file to this:target_dir ftp://user:pass@mysite.com:21/public_html/dirbut motion returns errors. want to be able to put mysite.com/dir/stream.flv into a browser and get the stream that would normally show up on my hardrive.I have also tried the wput on_photo_save, but it tells me that I have to many connections from my machines, and I don't want to have to have a frame rate of 2 per minute.
View 1 Replies View RelatedGeneral :: Ssh_config On Openssh Server Not Working?
Jul 4, 2011I have problem with the config file for clients which is ssh_config or ~/.ssh/config
every config that i write in them not working fore example when I change the escape character to ! its not working or any other config I checked with another system that has the same OS ((debian 6)) but the problem was there too
Do I missing something here that cause this? like enabling client configuration ?
General :: ThunderBird 3.0.4 Not Working With Exchange Server
Apr 12, 2010I am using Fedora 12 and Thunderbird 3.0.4 version I am trying the connect it to the IMAP server but it does not work (no authentication).
- IMAP with SSL
- SMTP with none
Though it works for other email client (Evolution). I there a problem with the thunderbird itself or am I missing something special to configure that I dont know of?
General :: Firefox Not Working - Cant Find Server At Start
Aug 23, 2010I just installed ubuntu 10.04 on my dell pc and it working very well. I also connect linksys usb wireless card to pc and my pc receives network connection without any problem. When I try to open firefox browser it does say"firefox cant find the server at [URL]... and asking me to check network connection or make sure that firefox is permitted to access the web.
View 4 Replies View RelatedGeneral :: Copy Files From Other Server Using Scp Using The Comands SCP Not Working
Jul 5, 2011We are running RHEL 5.5 .When am trying to copy files from other server using scp .using the comand below
scp -r -q oracle@oracle2:/home/oracle/* .
password :
access control disabled client can connect any host and after this it comes out and doesn't copy any file.
General :: Boot From An SD Card To Install On A Mac. Not Working?
Mar 17, 2011I am trying to install Linux with an SD card via an internal SD card reader on my MacBook Pro. When booting and pressing 'C', the system hangs forever. When booting and pressing 'Option', the same thing happens. Doesn't seem to be working.I used ode:dd if=/path/to/iso of=/path/to/sdcardto put the image on the SD card. The image itself was verified with MD5. It should be noted that Mac OS X can not read the SD card (bringing up an error) and installing rEFIt (a bootloader toolkit) and attempting to boot the computer results in yet another hang.
View 4 Replies View RelatedGeneral :: Cannot Install Ubuntu Server 9.10 To Vmware Server 1.0.6
Apr 28, 2010I cannot install ubuntu server 9.10 to vmware server 1.0.6.. is it the version of my vmware? everytime i try to install ubuntu 9.10, nothing happens..
View 2 Replies View RelatedGeneral :: Update Svn Working Copy Via Cron When Its Server Located On Local?
Aug 3, 2010I have two servers. One of them has a svn server running and another hosting projects.
I have a daily cronjob updating the projects -- ie running svn update, rebuild etc.
Now, my cronjob on the remote server works.
However, a similar cronjob running on the local server for local projects (ie the same server as svn) is instead displaying a "svn: not working copy".
I double checked the paths, permissions and user info and if the script is launched manually, it works fine.
Deploying the same thing remotely works.
I even tried using file:/// (suggested here http://www.hightekhosting.com.au/myaccount/knowledgebase/90/Using-SubversionorSVN-on-cPanel-Servers.html) but still nothing.
General :: Getting Belkin Router Working On A New Ubuntu Install?
Sep 27, 2010Last night I jumped into the linux world and finally installed Ubuntu in a dual boot system with XP on board as well (eventually I want to get rid of this). How can I get my wireless Belkin F5D8233-4 router working. I put the install disk in and it shows on the desktop but unable to execute - keep getting an error message. Getting frustrated...
View 6 Replies View RelatedGeneral :: How To Install Drivers To Get Wireless Card Working
Mar 18, 2011With nearly all Linux distributions (Ubuntu, Kubuntu, and Linux Mint being the exceptions), my system never seems to recognize that my laptop even has a wireless card attached to it. That is, when I run "lspci" the wireless card doesn't even show up on the list like it does with Ubuntu/Kubuntu/Mint. This narrows my options when it comes to choosing a distro to install on my computer. I can't seem to find instructions as to how I can make my wireless card work. I assume it needs a driver. I managed to find the driver, I think, in the form of a .tar.gz file. The card is a Realtek Semiconductor, RTL 8191SEvB Wireless Lan Controller (rev 10).
View 1 Replies View RelatedGeneral :: Install Movie Player For Ubuntu 10.04 Not Working?
May 17, 2010I have Ubuntu 10.04 installed been playing around with it for a week or maybe two. A little familiar with the command line tried to install movie player or install what was missing and I have had no success. I'm a new linux user got turned on threw school trying to get rid of my windows crutch
View 7 Replies View RelatedGeneral :: Intel Server Board S3420gp Onboard Network Not Working On Slackware 13?
Apr 12, 2011I have installed slacware 13 on an intel server, but the IP add that i have assigned does not work. I used ifconfig to check the ip but it shows me 127.0.0.1. I have run netconfig with the ip address i need and restart the machine, but it goes back to 127.0.0.1
View 2 Replies View RelatedOpenSUSE Install :: Not Working Right - Error "There Is A Problem With The Configuration Server (/usr/lib/Gconf-sanity- Check - 2 Exited With Status 256"
Jun 20, 2011Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk
View 9 Replies View RelatedServer :: DHCP Server On CentOS 5.5 Not Working - When Connect Any Devices To Eth1 They Don't Get Any IP
Dec 2, 2010I'm no expert on DHCP. My problem is that i have a CentOS 5.5 server on which i want to install a DHCP server. I have two NICs where eth0 has access to the internet and where eth1 should act as an DHCP server.
I have installed dhcpd and this is how my dhcpd.conf file looks like.
Code:
ifconfig looks like this
Code:
When i start dhcpd on eth1 i get no error messages but when i connect any devices to eth1 they don't get any IP. I cant find anything in any logs about devices trying to get an IP address. I dont have any firewall rules in iptables.
Server :: Postfix Relayhost Not Working, If Domain Hosted On Same Server, But MX Points Outside?
Jun 23, 2010i compiled and install postfix, and i using relayhost that point to my ISP. but my "DNS server" is on the same server where is installed postfix. and there is running apache with vhosts so i have domain that hosted on same server and in zonefiles of my domain my MX records points to Google Apps, to google's MX servers. But when i try send E-mail via sendmail to mail@mydomainonsameserver.com it not deliver mail to Google Apps totally, if i try to send to another E-mail everything fine it deliver it. so finally i done research this problem in Internet. And find that need to disable deliver mail to localhost(localdelivery)as i think postfix understand that the domain point to the same server where postfix have itself. and try to deliver mail local. but zonefile MX record even the domain on same server can point to another server outside. So i disabled localdelivery in postfix. and problem not fixed
View 2 Replies View RelatedServer :: LDAP SERVER: Post A Tar.gz With The Working Configuration Files?
Jan 14, 2010LDAP is endlessly not working, due to difficulties to simply configure it. I even cannot make the first steps of the installations ... It seems so difficult ... After many howto, wiki, reading, re-reading the errors are still there, always different, and not working.Is there an admin, coming from hell, that made running a LDAP server for sharing the basic configuratin files /var.. /etc... of a working LDAP Server in a tar.gz?
View 18 Replies View RelatedServer :: Working At The Command Line With Ubuntu Server Edition?
Jun 30, 2010Whilst I have used GUI-based Linux distros for the last few years, I am now struggling somewhat when it comes to setting up a server from the command line. All the howto's I've read so far tell you how to set up certain things, but I don't know what I actually need to set up.Rather than asking the same questions all over again on a forum like this, and generally being a bit of a noob, I wonder if there's a resource somewhere that someone could direct me to in order to know what I need to do to set up a fileserver.
The hardware is all done, and I will probably set up a router distro like IpCop to manage the network, but I'm rather lost as to what packages I need, and how to know what the server is/isn't doing.I've used plenty of command lines in the past (ms dos, amiga dos, BASIC programming etc), just not a linux command line. All I've ever done is mount a few drives, use nmap and started x
CentOS 5 Server :: Vsftpd - Working With NFS Server As Home Directory
Aug 31, 2009OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
General :: Install LVM In Ubuntu Server?
Apr 7, 2010should i install LVM in ubuntu server?
i have only one primary partition.
what happens if i dont install it?
General :: How To Network Install Using NFS Server
Jan 21, 2011i want to do linux installation on client machine from server.
i configured NFS server. i actually installed all 5 CD's to one directory. these are not iso images.
i created directory /serverimage and inside this i created directory for each linux cd. i.e linuxcd1, linuxcd2 and so on ..
now my directory structure is :
cd /serverimage
ls
linuxcd1
linuxcd2
linuxcd3
linuxcd4
linuxcd5
now i exported /serverimage in /etc/exports
but when i boot my client machine with the first linux cd. and using linux askmethod
i selected NFS. i entered ip address for nfs server and directory as /serverimage
but it is not taking. saying unable to mount.
shall i create .iso images. i dont want to use .iso images since i want to configure yum repository later once client is installed. i dont know if yum repository can be installed using iso images on the server. so i just copied cdrom to directories to share it via nfs.
General :: Install Dns Server In 12 And Configure Using Gui
Oct 25, 2010Im trying to install dns server in fedora 12 and configure dns server by using gui tool.
View 3 Replies View RelatedGeneral :: Domino Server Not Getting Install
Mar 31, 2010i am getting error message when installing lotus on linux machine
"Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
edit your shell's DISPLAY environment variable to reflect an unlocked terminal that you would like to launch the Domino Setup Program on."
General :: How To Install A CHAT SERVER
Sep 29, 2010Does somebody here have a knowledge on how to install and configure an open chat server system? I'm using CentOS ver5.3.
View 3 Replies View RelatedGeneral :: How To Install Dhcp Server
Mar 27, 2010How to install DHCP server in ubuntu 9.10, i googled but not able to find correct how to. if anyone installed provide steps in configuring dhcp3.conf file
View 1 Replies View RelatedGeneral :: Install SSH Server On Ubuntu?
Feb 15, 2010I just installed Ubuntu 9.10 on a machine here. Tried to SSH to it and failed. Tried to "ssh localhost" from the machine itself and that failed. Did a quick google search and found out that an SSH server is not installed by default.
But how do I install it?
I tried the following, which failed:
Code:
sudo apt-get install openssh-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]....
General :: Packages Used To Install Svn Server?
May 18, 2010wat are packages used to install svn server...?
View 1 Replies View Related