1. problem For the first i have read on the hyper-v sites that debian is not supported: [URL] but other hand i had found information on the internet that debian will still work. [url]
2. Problem When installed debian on the virtual server it asked for a Network Connectivity Hardware and my network card was not found on the list and i have alredy my debian install img file selected sow how do select the supported exe file for my network card in hyper v if i have alredy mounted my iso file?
3. and my biggest problem My biggest problem is that i can't use my mouse in hyper v the error text is(se picted bellow)
i have experiemented different way to install Linux Integration Components 2.6.32 and had no luck intstalling sow my question is that becuse hyper v is not supporting debian that's why it's not working? Should i search for a another virtual server software? anybody can recomened a good virtualization software running on windows server 2008 r2?
I'm brand new to Ubuntu (or any flavor of Unix/Linux, for that matter). I installed it (9.10) into a VM in Hyper-V with aplomb. However, the mouse isn't working, so I'm getting good at using the keyboard shortcuts right off the bat.Anyhoo, I'd like to get the mouse working. I downloaded Hyper-V for Linux 1.0 (integration components), but I can't seem to get it installed. I attach to the ISO from my VM and the CD shows up in Ubuntu, but then what? I tried running the setup.pl file, but nothing seemed to happen and my mouse still isn't working.
have a problem with an Acer Aspire one running linpus linux. I get a black screen with a white mouse pointer at startup. I don't know how this happened. I can interrupt the startup process with ^c and then see the following amongst other text :Loading x11 FronEnd module...Failed to laod x11 FrontEnd moduleFailed to launch SCIM
i have xterminus installed. i also have a white block over the first letter in my username and when i begin typing, the 'block-type cursor' just leaves full white spaces behind and i cannot read my text at all. even when i delete back over the white spaces, they stay whited out.
I installed compiz on squeeze. I followed the steps on [url] , everything seems fine except my gnome-terminal shows me a white-in-white screen, seems like both the background and foreground are white, I tried to change the gnome-terminal profile, it doesn't work, after I disable compiz, gnome-terminal back to normal. I tried to install xterm, it can work, but it not easy to use for me, I still want to use gnome-terminal,
My laptop is lenovo Thinkpad T400. 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
I downloaded Fedora 13 today and tried the live cd, however, after booting my mouse was a square that is white and scrambled. I am trying the KDE version and it also has no task bar or anything other than a window with icon to install. nothing else is there.
Just installed Ubuntu 9.10 64 bit on my computer dual booting with 9.10 32bit. Was hoping to move to 64 bit to get full use out of my RAM and CPU. The issue is that when I tried to run Compiz-Fusion that I got from the Ubuntu software repos that came with 9.10 nothing would change. I tried to make a 4 desktop layout with a cube like I have on the 32 bit OS and nothing happens. So I right click on the Compiz icon and select the "reload windows manager" tap in the drop down menu and every time it turns to a blank screen of white with a mouse on it. I can move the mouse and I can even use some of the new settings I changed but I cant see anything else besides a mouse and the white screen. I feel as thou I am using a version of Compiz that is not compatible with 9.10 64 bit.
I am trying to install Debian Lenny via Hyper-V. I get to the point where it asks for the network card. For some reason it can not find my network card. I have a RealTek (RTL8112L PCIe Gigabit LAN controller featuring AI NET 2 built on motherboard).
For some reason it doesn't see it. My issue is if I continue without the network how am I getting the drivers? Unfortunately Hyper-V doesn't support USB. I guess I can try to burn to CD but not looking to waste a cd for 480k and not sure that will work as I only see a auto.sh and a couple other files under scr directory. If anyone has any ideas please let me know. This is a fairly new Motherboard/NIC so I do not understand why it isn't recognized. I know it cant have everything but Realtek is a fairly common nic.
I have a hardware design which is completely tested and verified on windows OS. My hardware is connected to hyper terminal. Whenever I give a command from hyper terminal then my hardware will response in what way I need. As I am new to linux os I don't know how to open or how to configure hyper terminal in linux. I stopped my work completely.
I am looking for step-by-step guide to do so. I can go for any easy to work with Linux distribution , may be UBUNTU. But Hyper-V page says it officially supports only SUSE and REDHAT, others can be done on owner's risk.
I dont need future compatibility etc as yet, just need to do some experiments, so any distribution would be fine. FYI - I am trying BOINC installation and testing.
CNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20. The only avalible resolution is 1600x900. /etc/debian_version 8.1 GNOME Terminal 3.14.1 xnee 3.19
I have just updated Debian Squeeze and my mouse cursor is invisible. However, it still functions... I can right click and get a menu, clock on things and get the normal functions.
I have filed a bug report and found one other bug report on this but haven't found a fix or any other info.
Loads to the screen where you choose between regular and recovery, select e for the normal boot to see boot commands.
The GNU GRUB 1.98 boot reads as follows:
What do? ubuntu 8 worked fine, i ran an update to 10 and it did the same thing. i figured i would try debian since i have it on my other 2 computers. this is being installed on a desktop with a radeon 9800 graphics card. i know the card is the problem because of a driver issue (as i've read) but how do i get it.
I have removed windows title bar using this method: [URL]....
I have removed panel shadow using this method: [URL].....
I want to remove the small white line that appear under the panel in the following image:
This line appeared after removing of panel shadow, it was there all the time hidden under the shadow. I can change line color from panel background svg file or even make it transparent. but i want to remove that line, how can i do that?
I got a used Gateway Solo 9550 from a friend. It was running windows when I got it. So I decided to try to test Debian on it. I am relatively new to the Linux scene so I have had a few issues with no idea how to fix them. The biggest one is video. I can get it the laptop to boot up in recovery mode and have nomodeset enabled. With nomodeset in gnome it will work for approx. 20-30 seconds, and then the screen will turn white then to black and then slowly turn rainbow. I know that its not a monitor problem because I ran DSL and DSLN on the same rig, but when I plugin an external monitor its fine on the external but not on the internal.
Specs of the Solo 9550 1 GHz Pentium 3m Processor 512 MB of PC100 RAM Geforce 2Go 100/200
I installed 10.04 on a Hyper-V virtual machine and a few hours later discovered that the server was unusually sluggish. Top revealed that ksoftirqd was sucking up around 97% CPU. Reading up on the issue focused on earlier kernel issues, which I knew didn't apply to 10.04. I eventually discovered that I set two CPU cores in Hyper-V. Decreasing this to just one CPU solved the issue.
have 2 rigs with squeeze. one has a really cute grub menu with white text on black with stars & planets & rockets etc. (and i don't know how it got there) how can i get that on the other rig?
I'm using Robolinux Cinnamon which is Debian 8.2 (fantasic OS btw). I usually use a blank, black wallpaper but the default color of the icon font is black. I googled this question for about an hour before I came here. How to change the icon font color on the desktop to white?
I installed compiz with nvidia trouble is when I run compiz white bars or lines (bars) appear in open windows (icewease, gedit, etc.). They disappear after a few moment and reappear when scrolling a page. BTW everything works fine with metacity running as window manager.
Here is my xorg.conf: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (randy@juliet2) Fri Sep 5 15:03:39 PDT 2008 # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (randy@juliet2) Tue Jun 24 10:44:02 PDT 2008 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection .....
I have the nvidia driver 173.14.09 installed. Running Debian Lenny stable x64 and turion x2 with a geforce 8200M G graphics card with dual screens. I first installed the debian repos compiz, then upgraded to the tuxfamily repo version. I installed the nvidia driver 190 from nvidia's website and that fixed it!
I had been running "Etch" and upgraded to "Lenny". Now my mouse is NOT tracking correctly. When I move the mouse and then press and release the 'ctrl' key to show where the mouse pointer is the circle indicators are not where the pointer is. I therefore cannot make any selections from menus as 'lenny' thinks the mouse is somewhere other than where the pointer is. Also are there keyboard hot keys that i can use to access the menus?
I have a SONY 52x DVD Writer in my Desktop. Initially it was okay.. For the past 2 months or so , the DVD tray is super sensitive.. When I press the "Eject" Button , it comes out and immediately the next second goes back in..Also I face great difficulty in loading a CD/DVD .The moment the DVD touches the tray , it sucks the tray back in.
As a result , I am not able to position the DVD, most of the time it gets stuck ..I cannot manually stop the tray from going in as I guess the spring for the tray will break.Should I replace the drive? Apart from this mechanical issue , the drive reads and writes properly.. I like Drives which have separate open and close buttons (not the ones which you push from the front)
I'm running a CentOS 5.2 vm on a W2K8 hyper-v core server. The problem I have is that when I reboot, the system time always resets itself to 6:00 am in the morning. I tried the /sbin/hwclock --systohc command but it hasn't taken hold.
I'm looking to install the Microsoft Hyper-V Linux Integration Services (IC) on F13. I'm running F13 fine on Hyper-V, but with IC I should get better performance. I've read that IC may be built-into 2.6.33 kernels, though I'm not sure if it is in F13.
i'm running some virtual Fedora installations on a windows server 2008 with hyper-v. Most of them are Fedora 12 and 13. Everything works fine for some years. Yesterday i want to upgrade a F13 machine to F14 by netistall. The upgrade ran without any problems. After the reebot the machine was off the network. All the networkconfigs by DHCP are OK, IP address, gateways, DNS settings and so on. But the machine can't ping or connect to other hosts. I tried an VM from scratch with both F14 i386 and x86_64 - same ****. This is the first time i had such a problem by upgrading Fedora machines.
I installed Fedora 15 on Hyper-V (Windows host). I installed to disk, rebooted. Now I'm off to installing the Integration services, but I've got a few problems: 1) Since it is not yet installed, it looks like the network is not functional. 2) From what I can see, I need to have a couple of things installed beforehand (GCC amoung other things)
The problem is that when I did this previously with Virtualbox, I was able to install the pre-requisites with yum. Now this won't work as I have no network. I can't use VirtualBox here at work as we have everything else running under Hyper-V so have no choice but to go this way (VB and HV can't live together on the same host). it's just so much harder to go through this installation with Hyper-V.
Trying to install 10.10 netbook edition on my MSI U230 netbook from a USB drive. Keep getting the error "hyper transport sync flood error occurred on last boot" Press F1 to Resume. F1 causes just a reboot and the same thing happens. Anyone seen this error? It happens with both the netbook and desktop version.
