I have Ubuntu 9.04 in my desktop, I am trying to configure Photon+ wireless device in my desktop, since it is having .exe file i am finding difficulty to configure it( I know .exe will not work) , but i want to know is there any possibility to configure this modem in Ubuntu machine....
View 1 RepliesConfiguring(if possible) usb modem in redhat linux. Redhat not able to detect usb modem.
View 2 Replies View RelatedAny one tried to connecting the internet using Tataphoton+?
Device details:
HUAWEI Mobile Broadband
Model: HUAWEI EC 152
According to manual, the device should be detected as /dev/ttyACM0. But no device of this name is created. 'lsusb' identifies the device.
The required packages like wvdial, wvstream are installed. I have tried all the possible ways. Also created /dev/ttyACM0 with # mknod /dev/ttyACM0 c 166 0
Link to manual, in case any one wants to read it [url]
Just want to connect using GNU/linux any how. Can't live with WINDOWS
I have installed mandriva spring 2009 in my laptop HP Compaq CQ60..I am using net connection from Tata Photon plus using the modem ZTE AC8710. how to configure net connection..
View 4 Replies View RelatedI'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link text. I am still not able to get online
Also, it is very slow, but I was told that I would see speeds up to 3.1MB.
I dont have wvdial installed and cannot install it from apt as I'm not connected to internet
I am using TATA Photon usb internet stick. It's a Huawei USB modem. OpenSuSe detects and shows it as mobile broadband. But can not connect to internet. Any1 has configured similar device before? It shows me in "network manager" but no option to active/connect it. In Windows I got auto dialer for Photon. And customer care says no support for Linux.
View 2 Replies View Relatedi have been able to get on line running other linux os using the terminal first i type sudo modprobe -r usbserial & enter followed by sudo modprobe usbserial vendor=0x1199 product=0x120 & enter the last command is sudo dmesg|grep -i ttyusb. I have done this for years and it always has got me on line after the above i open kppp and select for modem /dev/ttyusb0 and click to verify kppp recognizes my sierra wireless usb modem and that is all i have ever had to do, plug in the usb modem type the three commands it comes back with confirmation the modem is attached to ttyusb0, ttyusb1 & ttyusb2 in kppp i click /dev/ttyusb0 and click quarry and get on line with suse11.1 it is not so the first command sudo modprobe -r usbserial comes back with a fatal error but the second and third command give me the same results saying i have attached the usbmodem to ttyusb0,1 & 2. but i cannot configure it in kppp.
i have tried researching on line but cannot find a similar thread. I believe the way i described above has worked on lindows 5.0, and it is how i do it with Mint which i can get on line with today. so i hope one of the wonderful millions of linux users will direct me as to what i am doing wrong. i am running amd 785 4 gb ram msi mainboard ms-7549 my modem is sierra wierless modem 595u (vendor=0x1199 product=0x120) connecting through Sprint pcs which requires no user name or password.
Iam using suse linux desktop 10.0. when i connect tata photon USB modem for internet, the system recognises the USB device but unable to connect to internet. How to use tata photon in suse linux
View 3 Replies View RelatedI am trying to get a USB wireless device to work on my desktop computer running OpenSUSE 11.1.
Here is what I have gathered after working through the sticky on getting my wireless to work:
In Yast Hardware Info:
USB:
UDI: /org/freedesktop/Hal/devices/usb_device_bda_8189_00e04c000001_if0
Note in boot log:
Failed services in runlevel 5: network
When I go into Yast/Network Devices/Network Settings, I can add a setting for this device but if I quit out of Yast and go in again the setting is no longer listed. What should I do next?
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedI'm new to Ubuntu. Recently bought a lenovo x100e netbook and installed ubuntu. Is there any Ubuntu Expert based in Cape Town that can assist to configure my internal 3g modem and a few other minor issues.
View 2 Replies View RelatedI 've tried many ways to configure my Reliance NetConnect with Ubuntu. I 've tried with wvdial, sudo pon, tried through Network Manager, and using wine I installed the .exe driver.
I liked Ubuntu, but I need to configure usb modem..
I 'm using Huawei EC325, Reliance NetConnect USB modem..
When I try using wvdial, I can see some operations performing, its dialing #777, but some prob with the carrier..
I have an internal cextant modem in my Dell Inspiron 630m laptop, with 11.04 knatty running.How do I configure knatty to detect and run my modem, as I need it to dial into equipment to do remote diagnostics
View 1 Replies View RelatedI am running Ubuntu 9.10 KK (UNR) on my Netbook and I use the Huawei E5830 as UMTS modem. I can connect to the E5830 through WiFo (no problem at all) and USB. How can I verify whether the E5830 is recognized as modem when connecting it to USB? It changes the mode from USB storage device to USB modem, however I think I can not access it as a modem.
View 9 Replies View Relatedhow to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedI have started using ubuntu 11.04 desktop edition recently. And sadly i dont have an internet connection. I have an USB modem of Huawei. But I cant configure that in ubuntu. Im from india and using Reliance Netconnect 1x EC121 modem. Can anybody please tell me how to configure this modem so that I can connect to the internet? Due to lack of internet connection im not being able to download any updates or codecs. I have started using Ubuntu only 2 days ago..
View 1 Replies View RelatedI have bought a new USB modem from my service provider. The model they provided is "Huawei EC1260" Huawei Terminal. As usual the official support is for windows and mac.
I tried to install this device using two methods..
1) Set knetworkmanager settings to "traditional with ifup". Then in wireless setup there is a choice of having "usb" (A tick box). I selected that, and setup completed successfully but the knetworkmanager was not up(I did ifdown wlan0 (wlan0 was the wireless config name), ifup wlan0 and the rcnetwork restart.)
2) Again knetworkmanager was set to "traditional method with ifup. This times while adding the connection I specifically selected the type "USB", then clicked to finish the configuration. The configuration finished without any errors but when I checked the Network Configuration screen no USB device was added there.
Are there any specific steps to configure a USB modem
I have a Multitech MT9234ZBA-USB modem. The CD included RHEL drivers which I have installed with RPM. The lsusb command output shows the modem: Bus 004 Device 005: ID 06e0:0319 Multi-Tech Systems, Inc.Which communications software should I use to connect to the modem and issue AT commands?
View 4 Replies View RelatedHow would I configure my box to connect to a modem in bridge mode?
I have a server at home that im migrating over to be the default-gateway/router. I have everything else setup (dns,dhcp etc) now just need the ppoe part, or so i beleive?
I have two interfaces. eth0 (lan) and eth1 ready to connect to the modem.
The modem is in bridge mode ready to go.
What is my next step? Are there any good guides, I didn't find any.
ubuntu is unable to find my huawei E160 modem driver when i insert it to my computer.
View 2 Replies View RelatedI've recently come into possession of this modem which is supposed to be supported in linux kernels but I'm not sure how to set it up or detect where it is located (dev/ttxx)
View 5 Replies View RelatedI'm new to opensuse as well linux.today i installed suse 11.3 and installation completed.then i plug the usb modem (ZTE mf 100) and then nothing appears..i dont know what to do for configure the modem.
View 2 Replies View RelatedI have a Zoom 2920 internal hardware modem that worked well with Suse 10.0. In Suse 11.3 the modem config. overview lists 2 modems for this one board; #1- AT Modem and #2- Venus Modem (v90, 56K Flex). With #1 "edit" brings up modem parameters and the modem device line is blank. With #2 the device line shows /dev/ttys4.
When the provider parameters are entered, for either #1 or #2, the modem overview continues to list them as not configured but a third line "modem 0" is configured with the provider information at /dev/ttys4. The modem will not function.
I have a Nokia 1508i, and I want to use it as a modem. But I've tried many times, many configurations and it didn't worked.
When I connect it via USB to the computer, it's recognized as /dev/ttyUSB0 and /dev/ttyUSB1.
When I try to connect using the Code: wvdial , I get the following message:
Code:
Modem Type = USB Modem This is the log of Windows when I connect:
Code:
Scanning your serial ports for a modem.
i m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not
View 14 Replies View RelatedI am beginner in UBUNTO 10.04 LTS. I have a mobile broadband of Relience which use the device of Huawei EC 1262. I have a problem with this modem. when i installed required packages for this device like usbswitch, wvdial etc, my internet connect works fine but as i switch off the PC and restart, PC can not detect the modem, it detect as mass storage device. Is there any command/option that i switch the mass storage device into modem in the terminal window or on the GUI platform mean on the desktop screen.
View 2 Replies View RelatedI just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
333mHz Pentium III
Lucid Lynx 10.04 LTS
US-Robotics 56K Faxmodem External
256mb RAM
ISP OmniLEC
i have some basic knowledge about device drivers.can any one tell how to write drivers for virtual modem, Actually my project is to implement communication between the two PCs by using two virtual modems. so for that i need to write the code for the virtual modem which it should understand all the AT commands exactly as physical modem and it should send/receive call and SMS.
View 1 Replies View RelatedI have just moved over from MS to Linux and so far I am pretty happy (couple of frustrations along the way, but nothing I could not sort out so far).
Except this little bit that has me bogged down. I am trying to get my HS2300 HSDPA wireless modem to work, but I am a little stuck here.
I found a post that I should get the HP-WMI module to load. That was a post on an older kernel and this guy mentioned that is should be included in newer versions of the kernel.
Modprobe did not deliver any results, however an "lsmod |grep wmi" delivered the following:
Obviously I need to look for hp_wmi, but so far I cannot get anything to work.
Fresh install of FC11. Had to install libwvstreams-4.5.1-5.fc11.i586.rpm and wvdial-1.60-8.fc11.i586.rpm
Now get following error -