Hardware :: How To Install Micromax Mmx310 3G Usb Modem For Internet
Feb 9, 2011
Regarding the installation of a 3g modem and it also has a built-in slot which reads micro sd cards. the company micromax has not replied even after a week for my request for linux drivers so i think that the dont have them. I have setup my network but i dont know if its working or not as i cannot connect to the internet via my usb device. i have done a dual boot of backtrack 4 final and windows xp sp2(bt4 installed after). my laptop is compaq presario v6307. i tried installing the windows drivers of the device in backtrack, they were installed and a icon was formed on my desktop in bt4 but when i connect the device the aplication tells "no device" i guess its not reading it right?
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
I am trying to connect my q75 micromax mobile with my computer as modem using wvdial. But I could not connect as modem. I insalled wvdial, gnome-ppp and mode switch through synaptic package manager.
This is the message I got from terminal window. After this, there is no connection. I closed the terminal window using ctrl+C command. My mobile is dual sim phone. I want to connect through one ISP provider for GPRS. How to set this in wvdial configuration file.
Quote:
subramanian@subramanian:~$ sudo wvdialconf [sudo] password for subramanian: Editing `/etc/wvdial.conf'.
I use ubuntu 11.04 on my laptop, which I upgraded yesterday itself. After plugging in the usb modem, lsusb shows 1c9e:f000. its product if is 9605. As it should be switching to 9605, but it doesnt. It doesnt show up in Computer as usb modem disk. Moreover, it also doesnt create any ttyUSB file in /dev. Whereas when I plug in the terracom usb 3g modem, it gets detected, switched and works fine. Kindly suggest as I am trying to solve this problem since 4 days with all the methods posted all over the internet, but nothing seems to work...
How to configure micromax mmx 310g usb modem in fedora 13? it comes with default installation files for windows and Mac.....moreover it is detected as a cd-rom when i am inserting it in fedora 13....
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code: Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7 Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
I recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?
I installed Ubuntu 10.04 this morning and everything is working fine apart from one thing. I am unable to install my Speedtouch 330 modem on it and connect to the internet, I looked on the help pages and found this:
"Visit Ubuntu Packages Search and search for each of the following packages. Download them to a folder that is also visible from Ubuntu (or to a USB stick).
As I cannot access the internet I had to go back to windows, download them onto a memory stick, go back on to Ubuntu and install them. The first 12 worked fine and are now installed but number 13 and 14 wont allow me to update because "the dependency is un-satisfiable" does anyone know what this means and how I can fix it? I was also unable to get the USB ADSL Modem Manager too install either because of another error.
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
My computer is already connected to a 100Mbps LAN. I can use wvdial to connect to internet using a modem when I have my LAN disconnected. Now, I want to share this modem internet to one of the IP addresses available on LAN. Say 10.100.99.56 for example.
Is it possible to use connect to the Internet using my internal modem which i have in my laptop using debian.. Please do help.Ofcourse i can do this with the windows 7 which is also installed in my lap.. I have a MSI laptop with model no. vr440..[color=#404040][/color]
I have just in stalled fedora 10 on my system and need help in connenting my wireless and lan ports as they arent working. i use an compaq c700 series. any tweaks available? cos i can only acesss the internet via a usb modem.
Can I connect my Linux PC to the Internet with a Nokia E71? I've looked for answers elsewhere but everything I've found refers to file synchronization, sending SMSs, playing with the address book, etc. I just want the Internet!
I have a usb modem : huawei e220.I am using ubuntu 9.10. I can't access the internet using it. I made a connection form the mobile broadband tab but every time it disconnects .Ubuntu identifies the modem but every time i try to make a connection it fails.
how to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
I have wired internet, but I can't connect to my modem. I have cable internet (Comcast) but my computer can't detect it. I do not know what do to. Tried a whole bunch a things, but I'm a novice, (Ubuntu 10.something I tried to call but they say everything was okay and I keep telling the Comcast lady I had Ubuntu, but apparently she insisted I had Windows. I thought they were not very smart, so I gave up on them.
I'm using Ubuntu 10.04, How can I install LINUX TERMINAL SEVER PROJECT to ubuntu & I want to know, Can I connect to Internet via 3g modem with LTSP & How can I share internet with thin client machines.
I am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
I was recently asked to get a 3G ZTE 633 modem (not in stores) to connect to the internet whenever it was plugged in. I had it successfully working on my Ubuntu Gutsy Gibbon machine but it does not work on Fedora 10 which is where it is required to work. When the 3G modem is plugged in I use a Udev rule to run usb_modeswitch which changes it from being in usb storage mode to being in modem mode. This part works fine. I then run a second udev rule (on the modem device), this should run a script which connects to the internet. Unfortunately it falls over here. The script does run but it will not connect. However if I run the script manually from root it works fine. I guess that it is a permissions issue.
One thing to note is that there are three udev devices associated with the modem. They are ttyUSB0, ttyUSB1 and ttyUSB2. I use ttyUSB2 to talk to the modem when connecting. Here are the files. If you require any more let me know:
The first udev rule: SUBSYSTEM=="usb", SYSFS{idProduct}=="2000", SYSFS{idVendor}=="19d2", RUN+="/usr/bin/usb_modeswitch"
The second udev rule: SUBSYSTEM=="usb", SYSFS{idProduct}=="0031", SYSFS{idVendor}=="19d2", MODE="0666", RUN+="/outputs/run_internet"
I'm an Ubuntu lucid user and i have AnyData adu 560d modem. i try to connect to the Internet using my modem, but ubuntu read it as usb, how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
This is my first post on forums.i am using centos 5.5 on my pc. i want to use internet on my using my cellphone as modem.internet is running successfuly on my handset.i have got a usb cable to connect it with pc.details are given below:-
I am using samsung mobile (sgh-b220) in order to connect to the internet. I can easily connect on windows system , using PC studio software. I tried KPPP, wvidial none solved the problem. (It successfully dials the number. Put pppd connection will be terminated)
Some how I managed to scan modem communication taking place on the windows system, and tried exact commands on linux system still I am not able connect.
I have attached log files from windows machine. wvidial.conf, wvidial out put file along with this post.
