I have a Nokia 1508i, and I want to use it as a modem. But I've tried many times, many configurations and it didn't worked.
When I connect it via USB to the computer, it's recognized as /dev/ttyUSB0 and /dev/ttyUSB1.
When I try to connect using the Code: wvdial , I get the following message:
Code:
Modem Type = USB Modem This is the log of Windows when I connect:
Code:
Scanning your serial ports for a modem.
I have a dual boot Win XP and Ubuntu 8.04. I use my phone Nokia 7210 Supernova as a USB modem on XP using NokiaPC Suite. I don't know how to do this in Ubuntu.
View 1 Replies View RelatedUsing my 3G to the net on centos 5.2 ?
View 1 Replies View Relatedi am using fedora 12is there any way to use my nokia n78 as gprs modem to connect my computer to internet
View 4 Replies View RelatedCan I connect my Linux PC to the Internet with a Nokia E71? I've looked for answers elsewhere but everything I've found refers to file synchronization, sending SMSs, playing with the address book, etc. I just want the Internet!
View 1 Replies View Relatedhow i can use my nokia E52 as a modem in ubuntu 10.10 to surf net in windows i use nokia pc suite and connect my phone by usb cable and connect
View 9 Replies View RelatedI want to use my nokia 6233 as a dial up modem in fedora 10.
View 1 Replies View Relatedhow do i use my nokia navigator 6119 as a modem
View 1 Replies View RelatedThere are absolutely no wifi hotspots near my school which doesnt have wifi. The only free hotspot is in the bar, and I use it quite often when I take laptop with me. Well, when I don't have wifi access I use my phone. When I had my old laptop with windows on it I could use nokia pc suite to connect to internet via phone on my laptop. Now I am 100% linux user (no way you would force me to go back, specially not on a laptop).
I was wondering if there is any software for fedora 12 that could do a similar thing and turn my phone in a modem...
How use my nokia n73 mobile as a bluetooth modem?
View 4 Replies View RelatedI have nokia 3230 with idea gprs and i want to configure it for open suse 11.0. I have problem with wvdial command...
Erros i got are as follows
Scanning your serial ports for a modem.
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
For lsusb it detects the phone correctly as-
whenever i issue wvdial command it gives error as follows--
I have edited wvdial.conf properly.. it just don't detect the modem ..
I m trying to show the power of linux to the world bt no body helps me after lots of googling i cant find a proper way to install rpm,gz,bz2 n etc software in linux. without any error. dependency,error,n lots of other problem that i have faced. so being on pt..from last 3 days i m trying to install Wvdial 1.61 bt i m unable to do it. some wvstreams.pc file stoping me. i m really frusted. being a new to linux no one can expect lots of searching by me me..from last 3 days i m just trying traying n only tying..every time Google rediectes me to this site.. This is my last try.
I had compile and install Wvstream.tar.gz file sucssesfully. mainly i dnt knw wheter it is done or undone..then i m trying to install wvdial as my main aim.bt as put the command make...it show some thing like could nt found wvstreams.pc...stop i had personally chk tht file in the pkgconfig folder bt it still shows me that error. i want to connect my cell phone to RHEL5 any how.. i want to use internet in linux..
I have configured my nokia 3230 as a modem on debian
Scanning your serial ports for a modem.
As u can see above my modem was gettin detected. but when i tried dialing it never got connected..
Iam sending the log file:
I am using a tata docomo connection.
How can i use internet on RHEL5.1 via Nokia N73 bluetooth Modem
View 3 Replies View Relatedi have the huawei 1550 3g modem (prepaid) tele2 and a nokia 5800 both working on on other dists,installed vwdial and vwdialconf finds the nokia and and recognize it as a modem.vwdial connects and hang up kppp same story. what is the deal with the phone? i have all the settings right it should really just work. And the usbmodem it seems like i need usb_modeswitch but i cant compile i properly and the slackbuild is broken/old.
View 13 Replies View RelatedTrying to move from Windows to OpenSUSE. I have installed OpenSUSE 11.2, and am having a hard time trying to connect to the internet using my nokia E65. I have tried to configure the modem thru YaST and it keeps showing that my nokia E65 modem is not configured, but adds another modem every time I configure using the edit button i.e. modem0, modem1 etc.
When i finish the configuration I get pop ups on the bottom right conner:
Notification from network management
WLAN interface attached
Network interface attached
But nothing happens afterwards. When I connect the phone it shows that it is recognized as a modem (probably). but when I click on the icon so it connects to my service provider "econet" it just says activating with a red x in the conner, and still nothing happens!
The following are the screenshots (still not sure how to attach files on this forum), may someone assist, with that too.
I really want to move from Windows but this is what's stopping me. the sooner I connect to the Internet through my phone, the sooner I leave Windows, since it's the only way I can connect to the internet.
I have tried wvdial, and I got the following:
i followed instructions here to use my nokia 5230 as modem:url
It works fine. But, as soon as i turn off the line or close the browser, computer freezes - black screen with few terminal lines same as those when i start or logout the computer. And nothing, i have to push start button to restart it.
I have fedora 12 installed in my laptop. Can anyone plz tell me how to connect nokia E51's modem ( via. Data Cable) to access GPRS !
View 2 Replies View RelatedMy broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies View RelatedI use OpenSuse 11.3, kde.
how to I have to configure KnetworkManager for using my Nokia c5 to connect to internet using a USB Cable (or bluetooth).
Given that Nokia have bought Trolltech, albeit quite a while ago now, I still can't see any native QT version of Nokia's software suite for their phones. Are there any plans in the coming year for a Linux version of Nokia's PC Suite software?
View 1 Replies View RelatedI was looking for a way to get the same or similar functionality as the Nokia PC Suite on Ubuntu 10.04. I did find a discussion here [url].
However it is fairly old (2008). I was wondering if it is possible to get more recent information.
In the Ubuntu Software Center I find two applications that seem to fit the bill. I need to know which is better or are the complimentary.
I have bought a new USB modem from my service provider. The model they provided is "Huawei EC1260" Huawei Terminal. As usual the official support is for windows and mac.
I tried to install this device using two methods..
1) Set knetworkmanager settings to "traditional with ifup". Then in wireless setup there is a choice of having "usb" (A tick box). I selected that, and setup completed successfully but the knetworkmanager was not up(I did ifdown wlan0 (wlan0 was the wireless config name), ifup wlan0 and the rcnetwork restart.)
2) Again knetworkmanager was set to "traditional method with ifup. This times while adding the connection I specifically selected the type "USB", then clicked to finish the configuration. The configuration finished without any errors but when I checked the Network Configuration screen no USB device was added there.
Are there any specific steps to configure a USB modem
I'm new to Ubuntu. Recently bought a lenovo x100e netbook and installed ubuntu. Is there any Ubuntu Expert based in Cape Town that can assist to configure my internal 3g modem and a few other minor issues.
View 2 Replies View RelatedI 've tried many ways to configure my Reliance NetConnect with Ubuntu. I 've tried with wvdial, sudo pon, tried through Network Manager, and using wine I installed the .exe driver.
I liked Ubuntu, but I need to configure usb modem..
I 'm using Huawei EC325, Reliance NetConnect USB modem..
When I try using wvdial, I can see some operations performing, its dialing #777, but some prob with the carrier..
I have a Multitech MT9234ZBA-USB modem. The CD included RHEL drivers which I have installed with RPM. The lsusb command output shows the modem: Bus 004 Device 005: ID 06e0:0319 Multi-Tech Systems, Inc.Which communications software should I use to connect to the modem and issue AT commands?
View 4 Replies View RelatedI've recently come into possession of this modem which is supposed to be supported in linux kernels but I'm not sure how to set it up or detect where it is located (dev/ttxx)
View 5 Replies View RelatedI'm new to opensuse as well linux.today i installed suse 11.3 and installation completed.then i plug the usb modem (ZTE mf 100) and then nothing appears..i dont know what to do for configure the modem.
View 2 Replies View RelatedI have a Zoom 2920 internal hardware modem that worked well with Suse 10.0. In Suse 11.3 the modem config. overview lists 2 modems for this one board; #1- AT Modem and #2- Venus Modem (v90, 56K Flex). With #1 "edit" brings up modem parameters and the modem device line is blank. With #2 the device line shows /dev/ttys4.
When the provider parameters are entered, for either #1 or #2, the modem overview continues to list them as not configured but a third line "modem 0" is configured with the provider information at /dev/ttys4. The modem will not function.
I have an internal cextant modem in my Dell Inspiron 630m laptop, with 11.04 knatty running.How do I configure knatty to detect and run my modem, as I need it to dial into equipment to do remote diagnostics
View 1 Replies View Related