General :: How To Use Micromax 3gb Usb Modem In Oracle-server-6
Apr 28, 2011I need to know that how to use my micromax MMX 352G (USB MODEM) in oracle linux. i am unable to detect my modem using wvdialconf.
View 2 Replies
ADVERTISEMENT
General :: How To Configure Micromax 310g Usb Modem In Fedora 13
Jul 10, 2011How to configure micromax mmx 310g usb modem in fedora 13? it comes with default installation files for windows and Mac.....moreover it is detected as a cd-rom when i am inserting it in fedora 13....
View 10 Replies View RelatedGeneral :: Unable To Install The USB_ModeSwitch - Unable To Connect Micromax 300G Modem In Debian
Jun 30, 2011I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedUbuntu Networking :: Micromax Q75 To Connect As Gprs Modem?
Oct 23, 2010I am trying to connect my q75 micromax mobile with my computer as modem using wvdial. But I could not connect as modem. I insalled wvdial, gnome-ppp and mode switch through synaptic package manager.
This is the message I got from terminal window. After this, there is no connection. I closed the terminal window using ctrl+C command. My mobile is dual sim phone. I want to connect through one ISP provider for GPRS. How to set this in wvdial configuration file.
Quote:
subramanian@subramanian:~$ sudo wvdialconf
[sudo] password for subramanian:
Editing `/etc/wvdial.conf'.
[Code].....
Ubuntu Networking :: Micromax MMX 352G USB 3G Modem Not Showing In 11.04?
Apr 30, 2011I use ubuntu 11.04 on my laptop, which I upgraded yesterday itself. After plugging in the usb modem, lsusb shows 1c9e:f000. its product if is 9605. As it should be switching to 9605, but it doesnt. It doesnt show up in Computer as usb modem disk. Moreover, it also doesnt create any ttyUSB file in /dev. Whereas when I plug in the terracom usb 3g modem, it gets detected, switched and works fine. Kindly suggest as I am trying to solve this problem since 4 days with all the methods posted all over the internet, but nothing seems to work...
View 3 Replies View RelatedHardware :: How To Install Micromax Mmx310 3G Usb Modem For Internet
Feb 9, 2011Regarding the installation of a 3g modem and it also has a built-in slot which reads micro sd cards. the company micromax has not replied even after a week for my request for linux drivers so i think that the dont have them. I have setup my network but i dont know if its working or not as i cannot connect to the internet via my usb device. i have done a dual boot of backtrack 4 final and windows xp sp2(bt4 installed after). my laptop is compaq presario v6307. i tried installing the windows drivers of the device in backtrack, they were installed and a icon was formed on my desktop in bt4 but when i connect the device the aplication tells "no device" i guess its not reading it right?
View 1 Replies View RelatedGeneral :: User For Oracle,tried To Install Oracle 10g On Redhat 5 But Gettinh The Same Error Message?
Nov 27, 2010I'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedGeneral :: Validating Oracle Databases On Server
Mar 4, 2011I just found that PMON and SMON are running (i.e., showing in the output of ps -ef | grep -i [o]ra)but when I check MMAN (used for internal database tasks), nothing comes up:
Code:
ps -ef | grep -i [m]man
Is that okay or could there be some problem?
So, what are the essential processes of an Oracle Databse that we must check for their status to make sure that the Oracle Databse is up and running fine? What steps do you usually take to validate an Oracle Databse on a Unix / Linux (Production) Server (specifically immediately after a CR has been worked upon)?
General :: Oracle VM Server Rel. 2.2.1 - 10GB Default
Jul 20, 2011The Default Template for installing Oracle VM Server has 10GB, what are the factors to take into account when considering sizes. I have only seen one installation, and 2 sizes were changed to 23072 and 5000. How can I see these settings?
View 1 Replies View RelatedGeneral :: Check With Nagios An Oracle Database That Is Located On A Server?
May 4, 2011I need to check with nagios an oracle database that is located on a server. There are a lot of plugins that are provided, the problem is that the database is located on a remote server (i have an hostaddress) and then i need to log on the database (i have username and pass)So i only need to have a plugin that connects to that hostaddress and logs on, but i can't find any plugin which does that
View 14 Replies View RelatedGeneral :: Configure UnixODBC On Rehat EL 5 32 Bit To Connect To An Oracle 10g Database Server?
Mar 28, 2010I'm trying to configure unixODBC on Linux rehat EL 5 32 bit to connect to an Oracle 10g database server. But when I retest the connection after the configuration then The error occurs:
# isql -v oralab4_dns vonphot vonphoto
isql: symbol lookup error: /usr/lib/libreadline.so.3: undefined symbol: PC
I have searched on Google.com for 2 days but I can't resolve the problem.
Ubuntu :: Installing Oracle - /etc/init.d/oracle-xe Configure Command Missing?
Jul 24, 2011I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
General :: Using Usb Modem In Redhat Server Edition
Sep 1, 2010I am new to redhat and tried to run my reliance net connect highspeed 1x... is there any possible way of directly using by pluging in... One way is using wine then running the exe format of the driver....but it too need net connection for further packages needed by wine...At present I have only usb modem for internet
View 1 Replies View RelatedServer :: Oracle 10g On CentOS5 And HP Proliant Server Is Slow?
Oct 25, 2010there is any other way to make oracledb on CentOS 5.4 and HP Proliant DL360 G5 Server fast access from a vb application. modified, reconfigured all to make faster but no use
View 2 Replies View RelatedServer :: Install Oracle 11g Without A GUI?
Aug 18, 2010I'm completely new to oracle and need to install oracle 11g onto my Linux box. But my Linux box currently has no X Term (KDE or Gnome).
Is there a way in which I can install this without the GUI ?
Server :: Configure DNS On Oracle Enterprise 5.4?
Apr 20, 2010I'm trying to configure DNS on Oracle Enterprise Linux 5.4 - Kernel 2.6.18-128.el5. When I restart the named service, I'm not getting any errors. But service is showing Failed. What could be the reason?
View 3 Replies View RelatedServer :: OEL 5.5 And Oracle 10.2.0.5 Low Decrease Of Memory?
May 13, 2011I have an issue with few servers. All have OEL 5.5 and various versions of oracle (mainly 10g something).
I've noticed on one machine that amount of free memory is slowly decreasing. When it comes to less then 30M, application has problems. Ive tried adding mem on this machine (virtual), and it behaves the same.
The same is on physical machines I have simmilar, if not the same config. Variations are with physical memory installed, and it does not matter if servers have 2G, or 8G, free -m gives around 30 free
It does not swap, and does not make some big issues on other machines, but on this one, application that uses this DB timeouts the user. Is there some chance to check what is creating this issue?
P.S. I've tried with DB admin to check something related to oracle itself, bit when we shutdown instance, Oracle frees 1.5G allocated to him, but nothing else. Will try testimg a bit more, but any thought on this is usefull. This is production server, so no big issues can be done. Will try to copy it to other hardware and do some testing, but then no App server available to attack it.
Server :: Oracle CRS Rebooting Node?
Nov 2, 2010I am running a 5 node 11g RAC cluster with cluster ready services. The hardware is HP BL460g6 with virtual connect modules on each chassis. The OS is RHEL5.5, 2 Qlogic 4G fibre cards, 2 Broadcom NICs bonded, and the backend disk is all Hitachi 15k. The issue that I'm seeing is periodically each day there are spikes in I/O waits for disk writes, and sometimes that will cause a node or 2 to reboot when CRS can't communicate with the other nodes. Both nodes that have been evicted, are on the same chassis. What I've checked is, the backend storage is not seeing ANY high utilization, in fact it's running at less than 10% all the time. The network is 10G, and is not showing errors on the switch, or on the blades themselves. The redo logs have a 10M buffer cache, and are running on ASM disk. What other information would be beneficial to check? I am seeing nothing in the logs as to any errors, or waits for disk writes. I believe it's a software issue, but am lost as to how to prove it. These aren't the only nodes experiencing periodic high I/O waits, and it happens at the exact same time on all systems, whether they run ASM or are part of a cluster.
View 1 Replies View RelatedServer :: RHL 8.0 Version Supports Installation Of Oracle 10g?
Nov 30, 2010Does the RHL 8.0 version supports the Installation of Oracle 10g
View 3 Replies View RelatedServer :: Cannot Startx By User Account Oracle?
Feb 3, 2010Startx by non-root user account in red hat linux kernel 2.6. How can I use the command "startx" by other user account such as "oracle"? I cannot startx by user account oracle?
Code:
[oracle@localhost ~]$ startx
Fatal server error:
PAM authentication failed, cannot start X server.
Perhaps you do not have console ownership?
Please consult the The X.Org Foundation support at [URL] for help.
[1]+ Stopped startx
[oracle@localhost ~]$
Server :: Oracle Server Load Avg
May 8, 2011I am not an oracle DBA, but need to find the cause of high load avg, even after adding more CPU power the load avg is the same.
Old and new servers load avg is the same (between 6-10 peak hours and 3 to 5 during off-peak hours) no difference. I expected the laod to come down as we added more CPUs.Our DBA says queries are optimise.Can some Oracle DBA give some tips to find the cause.
Server :: Script Not Being Executed By Cron In Oracle User?
Mar 5, 2010I have oracle installed on Linux I want to schedule a script "backup.sh" to run in oracle user.
oracle@linux1]crontab -e
*/2 * * * * /tmp/backup.sh
this script does not execute by cron.
But
oracle@linux1 tmp] ./backup.sh ------executes successfully
I don't know why the script is not being executed by cron.
Server :: Oracle Error Gets Changed During Data Recovery?
Jul 31, 2010We have a Wipro Net Power 8552 server on RAID 5 with Linux Advanced Server. The Databse is Oracle . Every time the reocovery is made the block corruption error gets changed. There are four hardisk in the Raid with 18 GB capacity of Quantum make. I want to make sure if any Utility is there in Linux to check the Harddisk if any Block corruption is there or Not.
View 1 Replies View RelatedServer :: Install Oracle RAC On Two Servers, With Shared SAN Storage?
Feb 16, 2011I am going to install Oracle RAC on two Servers, With shared SAN storage (Servers and Storage is IBM) OS = RHEL 5u5 x64 bit
And we used multipathing mechanism and created multipathing devices. i.e. /dev/mapper/mpath1. Then I created raw device /dev/raw/raw1 of this /dev/mapper/mpath1 Block device as per pre-reqs for Oracle Cluster. Every thing looks good, But we faced the performance issue as under.
when we run command :
#dd if=/dev/zero of=/dev/mapper/mpath1 bs=1024 count=1000
the writing rate is approx. 34 MB/s
But If we run command
#dd if=/dev/zero of=/dev/raw/raw1 bs=1024 count=1000
the writing rate is very slow like 253 KB/s
Software :: Oracle IPlanet Web Server 7 - Configuration Failed
Jul 5, 2011Installing Oracle iPlanet Web Server
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
Server :: Oracle Database - Mountpoint Read And Writable After Reboot
Jan 7, 2010We have a Dell PE6600 with a QLA2460 FC HBA in it. Server is running RedHat AS 4.7 (kernel 2.6.9-78), FC driver used is the file qlafc-linux-8.02.23-3-install.tar downloaded from the QLogic website. On this server is an Oracle database running (11.1.0.6). Files for the Oracle database are located in mountpoint /u02. The SAN is an iQStor 2880. Since several weeks we suddenly have problems with the Oracle database after a reboot of the server. After a reboot the mountpoint /u02 is readable and writable (tested by creating, opening and removing files).
However, when we try to start the database we get an error which give you the idea that the database is corrupt. The Oracle error is quite a general error. After doing a lot of testing we found out that if we unmount /u02 and mount it again (using mount -a so it reads the /etc/fstab), the database can be started after all. So the database is not corrupt but for some weird reason we have to remount /u02 first before the Oracle database can use it. We don't know if it's a linux issue, fibre issue, san issue or an oracle issue.
Red Hat :: Oracle 10g Database Installation Procedures In Redhat Enterprise Server 5?
Jan 13, 2011I have installed Redhat Enterprise Linux Server 5 on my laptop. I want to install Oracle 10g database on RHEL5 server. I want to know whether any additional rpm's need to install before installing the Oracle 10g.
View 1 Replies View RelatedServer :: Converting A Logical Volume To A Raw Disk To Mount Oracle ASM Instance On It?
Jul 21, 2010Could anyone give the steps for converting a logical volume to a raw disk to mount Oracle ASM Instance on it?
View 2 Replies View RelatedServer :: Configure RedHat As A Time Of Day Server For A Docsis Modem System
May 13, 2011I have been able to find enough information that I need to enable 'time-udp' in /etc/xinetd.d/ But there isn't an entry for time-udp. How do I enable time-udp (Time of Day server) on a Red Hat system? It's RHEL 5.6 64bit.
View 1 Replies View RelatedServer :: Best Option - Modem Or Server As The Router Of My Network ?
Sep 30, 2010What is the best option: leave the ADSL modem as the router of my network, or use a Debian Linux server in place?
Info:
* there is high traffic on my network (at work time);
* 7 PCs on the network;
* Debian Linux server: PC - Intel Pentium IV 3.06 Ghz - 2 GB RAM.
