I am running following command which is giving error
Code:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/trovalds/linux-2.6.git linux-2.6
Initialized empty Git repository in /home/tapas/LKP/pandora/linux-2.6/.git/ fatal: The remote end hung up unexpectedly Some one suggested me to check my firewall I am not clear as which port does git uses.
I am trying to use a git repo over http on my Debian 5.0 machine.
The git repository is located in /var/www/ on the Debian machine.
I can push/pull the repo using git protocol:
Code:
git clone git://192.168.0.1/project.git
but when I try to do the same over HTTP it give me following error message:
Code:
git cloneurl
warning: remote HEAD refers to nonexistent ref, unable to checkout.
I have builded a svn server using apache before. But recently I can not check out from the svn server,and error code is as follows:
svn: Can't find a temporary directory: Internal error
I have searched in the google,they said no space on the server.But my server have much space.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 49G 22G 24G 48% /
tmpfs 220M 0 220M 0% /dev/shm
/dev/sdb1 917G 867G 3.8G 100% /mnt/md0
/dev/hda1 151G 129G 15G 91% /mnt/meego
The server is at the /dev/hda1 partition.
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
i need to checkout a project from cvs fort a particular user i use the following command cvs -d server:francis:francis@cvs@10.200.2.23:/projects/aa_cesar co myproject when i do it using the eclipse it works fine but when i do it command line it does not checkout the reason is it takes cvs@10.200.2.23 unable to connect that is wrong username pasword credentials are given
View 9 Replies View RelatedI have Squeeze with 2.6.32 kernel, fresh installation and Intel 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device.I have done all updates, but Gnome Desktop freezes every day completely, I can move the mouse, but nothing happens.Keyboard works, but I can press only Ctrl-Atl-F1 and Ctrl-Alt-Del to reboot.
May 23 20:19:56 Squeeze kernel: [ 644.868007] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
May 23 20:19:56 Squeeze kernel: [ 644.868018] render error detected, EIR: 0x00000000
May 23 20:19:56 Squeeze kernel: [ 644.868724] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 8250 at 8249)
Everytime I shutdown/restart my computer without properly turning off the Tor network and get the following message from Vidalia:
"Vidalia detected that the Tor software exited unexpectedly"
The only way I can get Vidalia to work again is to reinstall Vidalia.
I have observed a recurring problem with video files. Very often the error stated below occurs when I try to play few files, but not when playing few other videos.The error is:"Mplayer has finished unexpedtedly. Exit code: 1"How can i get rid of this recurring error.
View 9 Replies View RelatedI downloaded F10 x86_64 live Developer Spin ISO file from fedora project spins website and burned it onto a DVD...Now when I try to boot from it, I get a menu as usual. Here I select the 'boot' option. Now it shows a 'loading' page with a progress bar and 'Fedora 10' written on the right side [as usual].. After that, on the next page I get the following error..
error: unexpectedly disconnected from boot status daemon I somehow did a reboot, and again the same problem. Microsoft XP and another Fedora are already installed on the same system..
am running centos5.3 on a virtual machine and was trying to do some basic hardening and part of it i had to modify the pam.d/system-auth file and from then i am getting a fatal error whenever i try to connect via ssh using putty i am not at all able to login the server with any of the accounts even root also.I am scared unknowingly did i lock the system???how to resolve this issue?
View 3 Replies View RelatedI'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
My problem is laptop is always hung what can i do?
View 4 Replies View RelatedHave a McFee Server; SuperMicro 370der, P3 Dual 1 ghz, 256 gig ram, 2 18.2 gig scsi(lvd) drives. Have tried loading 4 versions of ubuntu to my server and get hung on the agp chipset. don't know where to go to get it to work. Tried 6.0 to 9.10.
View 3 Replies View RelatedI have a problem between a jail root (so a group of users can access through sftp to Apache directory (var/www) an not get out of this directory.
1. I have the group 'sftponly', I need to access / var / www for sftp (read only)
2. On the other hand I need that user www-data (Apache) is the owner or at least have write permissions in the same directory (/ var / www)
The problem comes when the two needs together, as from what I read, to do jailroot in a directory is necessary for the owner is root and any other user has write permissions on it.
If along the jailroot with write permissions then attempt to connect to the client via sftp throws me the following error: "Error: Server unexpectedly closed network connection"
Permissions system User/group/Others doensn't work to me, so I tried it with ACL, but I have the same problem when I grant write permissions to the apache user.
Does anyone know how can I do for the user www-data can have write permission in the Apache directory and be able to create a user or group of users who are "locked"in this directory to enter sftp?
I am using Centos 5. I got one error unexpectedly after some configuration for rsync and folder settings. The error i am getting is "Serve Authorization directory (daemon/ServAuthDir) is set to /var/gdm but does not exist. Please correct the configuration and restart GDM." after rebooting.
I tried to resolve the issue by setting permission for folder /var/gdm to 755. but the problem is still not resolved.
I'm using Postgresql 8.4.2-2. I'm trying to remote into my server securely. I figure I could do so with ssh. Apparently I figured correctly, as per, [URL] and [URL] I setup the ssh tunnel. ssh -L 5432:serverip:5432 Then I setup pgadmin3 to connect as follows:
host: localhost
port: 5432
user: postgres
maintenance db: postgres
And I receive the following error:
An error has occurred: Quote: An error has occurred: Error connecting to the server: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request.
I'm not sure what the problem is. I can connect with Code: psql from the cli after connecting to the terminal via ssh. So I know that I'm using the correct password.
I got a windows that said ""Clock" has quit unexpectedly". Due to that error now I do not have clock!
View 2 Replies View RelatedI have installed fedora 14 ami on one of the amazon instance. And installed subversion successfully using following command: # sudo yum install subversion But when i try to check out code from our subversion repository which exist on deifferent remote machine, the checkout commands just hangs indefinitely. If run "top" command then i can see that cpu usage shoots to 100%.
View 5 Replies View Relatediam trying to scp files between two remote computers, i get the following error:
Host key verification failed.
lost connection
What i am trying to do is : scp u1@ip1:/source_path u2@op2:/destination_path
I am able to ssh into both machines fine, so i know that works. I tried google for this but couldn't make much of the results.
Installed earlier today VNC Free Edition and i like it a lot but the problem was that i have to log in after a restart whit my debian server before i can use vnc viewer, and i didin't like that you had to use it with out any encryption in the free edition. Sow i decided to try remote desktop sollution from windows 7 to debian.[edit] ended up whit xrdp on my debian server and it installed with out any problem but when i connected to it with windows 7 with the program Remote desktop Connection i get this error when i click something:
Remote Desktop connection: Becuse of a Protocol error, this session will be disconnected. Please try connecting to the remote computer again have somebady crost this problem before? does sombady have any good alternative program for xrdp? I know that xrdp is beta sow maybe is shuld not waist my time trying to get this problem fixed?
I try to do SVN checkout,looks like I'm facing this issue.I can ssh using putty to this server(banana).But from machine to machine it show same error.
SVN checkout
zr@banana [104]$ svn co $SVNROOT/deployment/new_debian_install
Permission denied (publickey).
svn: To better debug SSH connection problems, remove the -q option from 'ssh' in the [tunnels] section of your Subversion configuration file.
svn: Network connection closed unexpectedly
================================
ssh machine to machine:
zr@banana [105]$ ssh apricot
Permission denied (publickey)
I am running Fedora 11 with an Oracle 11g database installed. I came to check on it and found out that the oracle service had stopped. I also have a script that gets run by cron every minute. I noticed that the last entry in the log /var/log/cron was March 24 at 4:26. Which was really close (not exactly to the second but within a few minutes) of the last log entry in the database translator logs (the database was processing data and it outputs a log).
I rebooted the machine and cron started running again, but I can't get the oracle service to start again. Normally it runs at startup, but if I need to run it or check it, I use:
Code: /sbin/service oracle restart
Is there another log that I could look at to see what would be the cause of the stoppage? How to get the oracle service started again?
I am importing my project to another machine on my LAN to the directory:
/srv/svn/repos/my-repo
where my-repo was created via svnadmin create option
The permissions of /srv/svn/repos/my-repo are
drwxr-xr-x 6 svn svn 4096 2010-04-19
17:30 my-repo
I executed following command to import myProject files to my-repo on remote system
sudo svn import -m "First import" myProject svn+ssh://baltusaj@192.2.12.133/srv/svn/repos/my-repo
This command started 'Adding' files but gave following error after 'Adding' 7 files
svn: Can't open file '/srv/svn/repos/baltoros-valgrind/db/txn-current-lock': Permission denied
I recently bought a VPS with CentOS installed, 512 MB RAM and 80 GB ram, but I have a problem, I want to get VNC Desktop with it but I couldn't.
I installed KDE, GNOME but no one works.
This is my log from vncserver:
Code:
Code:
PC Specs:
OS: CentOS 5.5 32bit
RAM: 512 MB
HDD: 80 GB
Company: VPS-Hosting.ca
100mbps Connection.
We have one FTP server. Users are uploding files to the perticular directory remotely. but today some users got below error message.
421 Service not available, remote server has closed connection.
(vsftpd service is up and running) What are the possible causes for this error and from where I should start troubleshooting?
Code:
I found another thread similar to my question here: http://www.linuxquestions.org/questi...-issue-535818/
But I don't understand what the solution is. I believe this has something to do with the permissions on the directory im trying to check out so I did chmod 777 on subdirectory in /cvs(my cvsroot directory) and I was able to checkout subdirectory afterwards, but I still get the same error.
I'm creating a script that creates files from svn checkout and compress them using tar.gz the script gets the repository name from command line argument i need to capture a number from the last line of the output and create a file name from it.
The svn returns output of all the file names from the repository and in the end it says: revision number xxxxx. i need to get this number and then rename the tar.gz to it. how do i save the output to a variable and get this number.
This is the script:
Code:
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
I've tried two seperate downloads of the 9.10 installation media with the same results, I can't get to the installer. Each time I've tried it boots into the livecd portion. So how do I install this thing? I've even tried from the System/Administration/"Install Ubuntu 9.10" option on the livecd top menu, but get an error: "Sorry the program "ubiquity" closed unexpectedly" there is nothing that explains the installer not running in either dmesg or /var/log/messages. If the livecd can boot, why does the installer not load. I am selecting the "Install Ubuntu" option not the try it without installing option.
View 3 Replies View RelatedI have tried to install CentOS about twenty times. Each time it hangs up at package download. I says that file rsh-o,17-40.e15.i386.rpm cannot be oppened Due to a missing file or corrupt package or corrept nedia.
View 4 Replies View Related