i need to checkout a project from cvs fort a particular user i use the following command cvs -d server:francis:francis@cvs@10.200.2.23:/projects/aa_cesar co myproject when i do it using the eclipse it works fine but when i do it command line it does not checkout the reason is it takes cvs@10.200.2.23 unable to connect that is wrong username pasword credentials are given
View 9 RepliesI am running following command which is giving error
Code:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/trovalds/linux-2.6.git linux-2.6
Initialized empty Git repository in /home/tapas/LKP/pandora/linux-2.6/.git/ fatal: The remote end hung up unexpectedly Some one suggested me to check my firewall I am not clear as which port does git uses.
I am developing an application which has various modules; some pure fortran, some c++ linking to fortran, using g77 and g++. Does anyone know how to prevent 'fort.6' files being produced and put the output to 'stdout' instead? They are written by write(6,*) or write(*,*) statements. They end up in 'bin' which causes big problems.
View 1 Replies View RelatedI have written a PCI LKM device driver that compiles and loads correctly via #insmod libfoo.ko. When # dmesg | less is run I get good results and no errors in the log. The LKM header file is visible in the eclipse workspace.how do I attach (link) this loaded LKM in a eclipse project so that the LKM driver functions are visable?
View 2 Replies View RelatedI have installed fedora 14 ami on one of the amazon instance. And installed subversion successfully using following command: # sudo yum install subversion But when i try to check out code from our subversion repository which exist on deifferent remote machine, the checkout commands just hangs indefinitely. If run "top" command then i can see that cpu usage shoots to 100%.
View 5 Replies View RelatedI try to do SVN checkout,looks like I'm facing this issue.I can ssh using putty to this server(banana).But from machine to machine it show same error.
SVN checkout
zr@banana [104]$ svn co $SVNROOT/deployment/new_debian_install
Permission denied (publickey).
svn: To better debug SSH connection problems, remove the -q option from 'ssh' in the [tunnels] section of your Subversion configuration file.
svn: Network connection closed unexpectedly
================================
ssh machine to machine:
zr@banana [105]$ ssh apricot
Permission denied (publickey)
Code:
I found another thread similar to my question here: http://www.linuxquestions.org/questi...-issue-535818/
But I don't understand what the solution is. I believe this has something to do with the permissions on the directory im trying to check out so I did chmod 777 on subdirectory in /cvs(my cvsroot directory) and I was able to checkout subdirectory afterwards, but I still get the same error.
I'm creating a script that creates files from svn checkout and compress them using tar.gz the script gets the repository name from command line argument i need to capture a number from the last line of the output and create a file name from it.
The svn returns output of all the file names from the repository and in the end it says: revision number xxxxx. i need to get this number and then rename the tar.gz to it. how do i save the output to a variable and get this number.
This is the script:
Code:
I am trying to use a git repo over http on my Debian 5.0 machine.
The git repository is located in /var/www/ on the Debian machine.
I can push/pull the repo using git protocol:
Code:
git clone git://192.168.0.1/project.git
but when I try to do the same over HTTP it give me following error message:
Code:
git cloneurl
warning: remote HEAD refers to nonexistent ref, unable to checkout.
I am an undergraduate anthropology student doing research for my dissertation on the F/OSS community.I'm interested in are forking (What sort of thing causes/averts a fork? Have you ever participated in one?), the process of decision making (Is consensus democracy effective? Where do communication structures often break down?) and any other reflections or thoughts that you think are relevant.
View 3 Replies View RelatedI have two files fasta file and qual file and i need to run mira3.Is it possible to run the mira3 project without the .sff files.and if so where do i get the .sff files since i have only the fasta and qual files.
View 1 Replies View Relatedi am working on a project that requires updation after every 10 days that is after 10 days , i have to apply a new release. every time i need to copy all things from one path and paste it to different locations that is a manual work, i want to create a self extractor, in which i have to give only path, that is the path where i need to paste the files.
View 7 Replies View RelatedI have learned RHEL 5 recently and i m an engineering student, i want to make a project using RHEL 5, I have done mainly Servers.
View 2 Replies View RelatedI'm trying to use BlueJ 3.0.2 on Ubuntu 10.04, but I can't do nothing. I mean: I can't create new project or open existing one.I installed it twice times without problems.I did not find anything either with google or in the developers' website.
View 1 Replies View RelatedI have a small java project that handle connections. In order to run it from the terminal I have to cd into the folder that contains the source and run the following command:
java -cp classes com.packagename.mainclass
Where classes is the folder that contains the classes. I want ubuntu to run this application on startup, is there a Java command I can use? Or am I just better off creating a shell script?
I am a Master's student.I am a newbie to Linux. I am interested in doing a term project in C kernel programming. I need help in developing a project in which I can use C kernel programming .
View 2 Replies View Relatedhow do i count the total number of cfiles in the project.My project is on a solaris machine what is the command that I have to run to know the total count of cfiles in the .pj folder.
View 1 Replies View RelatedI am college student and for this semester. I am planning to do a project in Linux. Also I have a plan 2 create a new shell in linux.
View 4 Replies View RelatedI just installed OpenSUSE 11.3 and I want to use Kdevelop 4.0 for programming in fortran. when I try to start a new project (Project/New from template) I only get the choice between C++ and PHP. What can I do so that I can also use fortran.
View 1 Replies View RelatedI have installed gfortran,cmake,etc,but there is no fortran project to chose.What should I do ?
View 2 Replies View RelatedI have Debian 5 machine on which I want to compile the kernel 2.6.35 as per my project requirement.
View 6 Replies View RelatedI am doing my work integrated Master's degree. I want to do a project which can be either linux based application or adding a feature to the linux kernel as a kernel extension. Please give me some ideas for this. The duration of project is around 6 months along with my regular office work.
View 7 Replies View RelatedI have a general question and decided to post it here. Hopefully, I have picked a correct category. The thing I have been trying to figure out is the syn-cache mechanism. I know that it used to be utilized as a method to mitigate the impact of (D)DoS attacks. I would like to know what happened with it? Is it still added to the Linux systems? Perhaps I am missing something, and cannot find the correct man page about it. Is it the thing, that it is only for NetBSD project?
View 5 Replies View RelatedI wanted to design a project in linux which could contain programming languages(C, perl, PHP, HTML, XML etc) basically a web based project. Why I have chosen to build on Linux is because it is Open Source, and lot many things can be automated through scripting languages, which in windows I don't know. So, I have installed linux on a virtual machine(Host-Windows 2007 & Guest Linux CentOS), CentOS(command line interface). Since I am a beginner, so I want to know what all tools can be used to facilitate and ease my development process. Some which I know are listed below:
1) Using Putty so that can access the Linux machine from anywhere within the network.
2) Since I want to develop on Linux, but want to use windows as developing platform. So have downloaded Eclipse Editor (C/PHP) on windows. But want to know how can I access linux files from here?
3) Installed Samba, and still trying to figure out how can I access linux files remotely on Windows.
4) How can I ease my development process and what all tools I can use..??
I want to do some innovative opensource project for my final semester .It should be small and to be finished within 2-3 months .
View 3 Replies View Relatedi am trying to upload project to a cvs repository installed on centos 5.4. the problem i am facing is that certain folders from the repository dont get uploaded to the cvs. i dont know the exact reason why? i checked the permission on the folder and the file under the hierarchy but there was no issue , all other projects were sucessfully uploaded .
View 7 Replies View RelatedI want to delete a subfolder ABC in a main Project folder Globe. It occurs in many subfolders. It is very hectic to search and issue an rm -rf ABC command. I need to make a script for that .
View 4 Replies View RelatedOur A+ project was to set up a dual-boot using XP Pro & the Linux download of our choice. What we did:
1- We formatted a 38GB HD using the NTFS file system.
2- Two equal sized NTFS partitions were created.
- Partition 1 was a Primary.
- Partition 2 was an Extended.
3- Used Ubuntu CD.
4- Install Ubuntu choices were to format the HD, install side-by-side, use the the longest continuous space, etc. We chose side-by-side.
5- After the install there was no evidence of the 2d 18GB partition (which we planned to use for XP Pro).
When we booted to the XP install disc that program booted to another HD (C.
I am semi new to the embedded linux scene. I dont use UNIX much but I have played around with it and know how powerful it is. Currently just finished a degree in Computer System Engineering in the UK and have a whole summer break to mess around doing something. So I have decided to start a project I've been planning.
Starting the project, first of all I need to find a good handheld system I can work on. This is where I'll be importing the code onto/applications. At the moment all I want it to do is boot and run a distro of linux, but in the future I am going to be working on making it 3/4G and wirelessly able.
What I need:
-Size is roughly around the same size as a ipod maybe, or smaller.
-Needs a nice screen, nothing massive but needs to be easily readable.
-Text entry is needed, but im sure a few buttons can do it.. keypad would be really really nice though.
-A 3.5mm audio jack (or something similar to plug headphones into) is needed or it needs to have the capiblity to install this.
-Wifi/3G support, needs to be able to support these in the future or able for me to hack them in.
-Rechargeable powersource.
-Cost, nothing mega expensive !
I have problem when I deloy project honeynet with honeywall 1.4. can upload again for me honeywall version 1.3 or 1.0.
View 5 Replies View Related