Ubuntu Installation :: Error "Sorry The Program "ubiquity" Closed Unexpectedly"
Jan 27, 2010
I've tried two seperate downloads of the 9.10 installation media with the same results, I can't get to the installer. Each time I've tried it boots into the livecd portion. So how do I install this thing? I've even tried from the System/Administration/"Install Ubuntu 9.10" option on the livecd top menu, but get an error: "Sorry the program "ubiquity" closed unexpectedly" there is nothing that explains the installer not running in either dmesg or /var/log/messages. If the livecd can boot, why does the installer not load. I am selecting the "Install Ubuntu" option not the try it without installing option.
I have a problem between a jail root (so a group of users can access through sftp to Apache directory (var/www) an not get out of this directory.
1. I have the group 'sftponly', I need to access / var / www for sftp (read only)
2. On the other hand I need that user www-data (Apache) is the owner or at least have write permissions in the same directory (/ var / www)
The problem comes when the two needs together, as from what I read, to do jailroot in a directory is necessary for the owner is root and any other user has write permissions on it.
If along the jailroot with write permissions then attempt to connect to the client via sftp throws me the following error: "Error: Server unexpectedly closed network connection"
Permissions system User/group/Others doensn't work to me, so I tried it with ACL, but I have the same problem when I grant write permissions to the apache user.
Does anyone know how can I do for the user www-data can have write permission in the Apache directory and be able to create a user or group of users who are "locked"in this directory to enter sftp?
I'm using Postgresql 8.4.2-2. I'm trying to remote into my server securely. I figure I could do so with ssh. Apparently I figured correctly, as per, [URL] and [URL] I setup the ssh tunnel. ssh -L 5432:serverip:5432 Then I setup pgadmin3 to connect as follows:
An error has occurred: Quote: An error has occurred: Error connecting to the server: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request.
I'm not sure what the problem is. I can connect with Code: psql from the cli after connecting to the terminal via ssh. So I know that I'm using the correct password.
As the title implies, I'm having an issue with svn, whenever I try to make an svn action, I get: svn: Network connection closed unexpectedly
I've done some Google-fu on this, and the obvious culprits don't seem to be at work. Specifically, the svn server does not use a nonstandard port, and I'm not using Tortoise SVN or putty, just going directly from the command line. Additionally, I was able to use the server as recently as this morning and no coworkers are having problems.
I have installed slackware 64 current in my PC from an ISO CD I downloaded from one of the mirrors. Everything was all right exept I wanted to get the last upgrade doing : slackware update slackware upgrade-all When I tried to reboot I had a black screen after X server started. Then I decided to edit xorg.conf to it's default before I installed the NVIDIA driver. So I got my screen back. I reconfigure my desktop running NVIDIA setting to the resolution and font I prefer. But my keyboard layout is still querty when I configured it to azerty. When I run system settings and Regional & Languages I get an error :
Quote:
KDE keyboard Layout switcher closed inexpectedly....report this error....
How can I enter command key to change the keybord layout to French ?
While creating a new VM for Win2K, I guet the following error when I try to "Finish":
Code:
Unable to complete install '<class 'libvirt.libvirtError'> socket closed unexpectedly Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/create.py", line 717, in do_install dom = guest.start_install(False, meter = meter)
[code]....
This looks like a SELinux issue, since I do get a warning: SELinux is preventing qemu (qemu_t) "search" to / (fusefs_t). I'm attaching the complete SELinux Alert.
I got an ubiquity error when installing using erase entire disk option.Install just hangs after this error. I have an oldish p4 pc, 40 gb hard drive with faulty windows xp installed on it.
I'm remotely connecting to SUSE 10 system using OpenSSH_4.2p1 from PUTTY. My problem is that my session to the server was getting disconnected after some time. when i'm giving "exit" command, it is giving the message "server unexpectedly closednetworkconnection".Also it is showing my last login wrongly. what went wrong from sshd side i dont know
I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100 udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
I downloaded F10 x86_64 live Developer Spin ISO file from fedora project spins website and burned it onto a DVD...Now when I try to boot from it, I get a menu as usual. Here I select the 'boot' option. Now it shows a 'loading' page with a progress bar and 'Fedora 10' written on the right side [as usual].. After that, on the next page I get the following error..
error: unexpectedly disconnected from boot status daemon I somehow did a reboot, and again the same problem. Microsoft XP and another Fedora are already installed on the same system..
I am using Intel Fortran compiler and experience a weird behavior
i have a subroutine writing data to netcdf called from the main program and causing a library error. when debugging i saw that the program first jumps to line 411 of the source code and only then to the first executable line of the code at 96 (the source is attached). when looking at the assembler code i see the same thing.
the netcdf error sais the unlimited dimension is defined more then once and that is waht is done in line 411 compiler flags were: -g -C -traceback -check all -debug all -w95 -save -cpp -w90 -w95 -w -vec-report1 -r8 -i4 -heap-arrays
I just made a custom ubuntu, following these instructions [url], and it works great, but during the install ubiquity tries to check the cd for extra packages... and prompts an error... but it doesn't have any packages nor it is needed to have... i just want that ubiquity skips this instruction.... I'm guessing the correct pressed instruction will solve this, but I can't find any mention to this...
I know I've probably should've searched a little harder than what I already did but... If evolution mail is closed, I get no notifications... How can I minimize this to the tray, or have the notifications show even with the program closed?
i am trying to install ubuntu from an SD card, i can run it from the card, and everything works fine, all but the install. i get to step 3 of 6. when pressing forward i get an error message ubiquity.components.partman failed exit code 141
I am re-installing Ubuntu onto my desktop PC which has Windows 7, openSUSE 11.2 and Fedora Core 12. First I tried Ubuntu 9.10. Near the end of the installation the machine reboots and the monitor shows the following message:
"Ubiquity.components.partman failed - Exit code 10. Further info in /var/log/syslog"
Tried again with Ubuntu 10.04 beta2 with same problem.
How can I view and read /var/log/syslog if Ubuntu fails to be installed and therefore I cannot access this log?
I am trying to install Lubuntu on a 2GB USB drive. The (L)ubuntu installer (ubiquity) disables the "forward" button since the minimum space required is 3.6gb, although the Lubuntu installation actually is <2gb.I read somewhere this was a handset value but I haven't been able to find out how to override this?
Initialized empty Git repository in /home/tapas/LKP/pandora/linux-2.6/.git/ fatal: The remote end hung up unexpectedly Some one suggested me to check my firewall I am not clear as which port does git uses.
I have observed a recurring problem with video files. Very often the error stated below occurs when I try to play few files, but not when playing few other videos.The error is:"Mplayer has finished unexpedtedly. Exit code: 1"How can i get rid of this recurring error.
am running centos5.3 on a virtual machine and was trying to do some basic hardening and part of it i had to modify the pam.d/system-auth file and from then i am getting a fatal error whenever i try to connect via ssh using putty i am not at all able to login the server with any of the accounts even root also.I am scared unknowingly did i lock the system???how to resolve this issue?
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
I am facing a problem with Eclipse after I installed it today. It keeps closing [unexpectedly] after I click a choice like closing one of the pop-up windows that shows after I choose an option from the menus in the top. With no errors returned or shows up! As an example, when I choose to create new project, and fill in the project information [Name, type, path] and when I click FINISH all Eclipse closes, and I need to re-open it again [I find the project that I created there].
When i'm trying to compile nvidia closed drivers, i got an error. I've tried binaries one on nvidia suse repo, but as i installed kernel 2.6.32-41 they didn't work. My laptop is a lenovo T61, with nvidia quadro nvs 140m, and intel chipset. And i'm trying to instal driver version NVIDIA-Linux-x86_64-100.14.11.
That's the error i get when executing nvidia-installer: Code: nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Fri Feb 19 20:56:25 2010
Could someone look this over and give me the details on how i remove the package or program that did not recomplie correctly and doesnt behave right. Its called Novacom i was using it when testing some tethering with my palm pre, but as you can see in the terminal output below everytime i install a new package i get the same error about trying to recompile novacom. Im new to Linux but really liking not being on windows any more.
Unpacking kooldock (from .../kooldock_0.3-1ubuntu3_i386.deb) ... Processing triggers for man-db ... Setting up palm-novacom (0.3-svn177284-hud9) ... stop: Unknown job: novacomd
Firstly I am new to red5 and not very strong when it comes to linux. I have had installed red5 on my dedicated server and going by the http://myIP:5080/installer demos it is all working fine. My problem is I cannot get it to work with my software being flashchat. I am not sure if it comes from me using the incorrect RTMP url and if so after trying about 20 or more ways of typing it in I always get the same error message "Connection Failed' or "Connection Closed" not to sure what is meant by Closed as to whether it's working but can't get in or what ever. I am after someone who can get this to work for me please and I am willing to pay for that service once it is working.
I am using Centos 5. I got one error unexpectedly after some configuration for rsync and folder settings. The error i am getting is "Serve Authorization directory (daemon/ServAuthDir) is set to /var/gdm but does not exist. Please correct the configuration and restart GDM." after rebooting.
I tried to resolve the issue by setting permission for folder /var/gdm to 755. but the problem is still not resolved.
