I have observed a recurring problem with video files. Very often the error stated below occurs when I try to play few files, but not when playing few other videos.The error is:"Mplayer has finished unexpedtedly. Exit code: 1"How can i get rid of this recurring error.
View 9 Repliesflash version 10.0 r45 in firefox plays video, graphics, and sound just fine. however, while i'm playing a video on videos, or listening to pandora, the sound could unexpectedly crash. when this happens, sound doesn't just stop playing. it keeps playing but loops the sound every second or so - it's kind of strange to describe; the sentence, "hello, how are you?" could sound like "he-he-he-he ar-ar you-you-you". has anyone experienced this? i say it happens 'unexpectedly' because i can't replicate the crash on demand, but it happens in every firefox session. it seems that it does not matter what i'm doing - i've tried crashing it by making a flash video full screen and exiting continuously etc. because sometimes it happens when i'm going to full screen or changing tabs.
however, most of the time it happens when i'm not even touching the computer - i'm not sure if some background process can cause flash's buffer to overflow, or whatever. other times, it doesn't even need me to play anything for it to crash the sound in flash - it could loop sound from the first time i tried playing it in flash in that ff session. even when i exit firefox or pause the sound it takes a few second for the loops to stop. however, when i restart firefox the sound is fine until it crashes again and i have to restart, again! i tried removing libflashsupport as i read in other threads that it causes sound issues - no luck there. i uninstalled, installed and all that jazz. tried strace - doesn't report any flash errors for some reason, or as far as i can understand.
i also installed the flash debugger for use with the firebug extension, flashbug addon in firefox, but i'm not getting anything there either - i think it can't locate the flash debugger, although it lists the right version. i haven't had this problem with chromium yet, but i mostly use it when flash sound in firefox crashed and i don't want to reload ff; i think they use the same 'libflashplayer.so'? also, just to clarify, sound from the mplayer plugin works fine, and when the sound crashes in flash it does not cause ff to crash and quit. firefox continues to run normally but when i play sound in flash it starts looping. i've had sound problems in the past and i'm thinking there is something i messed up in the packages i have installed. i uninstalled pulseaudio because it was the only way i could find to get my skype working. how would i know if there are conflicting elements?
here's what i get from 'lsof | grep snd':
code:
firefox 956 angelos mem chr 116,4 3850 /dev/snd/pcmc0d0p
firefox 956 angelos 120r chr 116,2 0t0 3751 /dev/snd/timer
firefox 956 angelos 122u chr 116,4 0t0 3850 /dev/snd/pcmc0d0p
firefox 956 angelos 123u chr 116,8 0t0 3874 /dev/snd/controlc0
keytouchd 4518 angelos 4u chr 116,8 0t0 3874 /dev/snd/controlc0
knotify4 4683 angelos 12u chr 116,8 0t0 3874 /dev/snd/controlc0
kmix 4690 angelos 10u chr 116,8 0t0 3874 /dev/snd/controlc0
keytouchd 8563 angelos 4u chr 116,8 0t0 3874 /dev/snd/controlc0
it seems to me like there should be a conflict between all those using the same sound control? however, why would it just happen unexpectedly? also, is there a way that i could dissociate sound from firefox without having to reload a whole session with many tabs?
To make a long story short:./usr/bin/mplayer: relocation error: /usr/bin/mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference
Debian-unstable. I tried to play some avi files with smplayer. I got an error message and searched the fscking web: http://www.mail-archive.com/pkg-multime ... 02393.html
[Code]...
I get that error when trying to open an .flv or .avi file. Anyway to fix it? Here is the output of gui.conf
[Code]...
I've noticed the Packman mplayer's ffvorbis doesn't seem to be working on 11.2 (x86)-any vorbis seems to be decoded as very quiet noise that roughly matches the sound that ought to be made. Audio output (-ao) doesn't make any difference, and I've the same problem on three different machines. Xine, vlc, ffplay, etc. all work, as does -afm tremor (the reference decoder) with mplayer. The verbose output from mplayer seems to be the same between these systems and an older 11.0 system with a not-very-recently-upgraded version of mplayer. Unfortunately, packman does not keep old versions of packages, and compiling mplayer is somewhat of a chore, so it is not immediately easy to test an old version of MPlayer on 11.2 for me.
I'm using the samples from Vorbis.com: Music to test with, so I assume there is nothing peculiar about the files.
Is anyone successfully using current (1.0rc2_r29796) Packman MPlayer to play either vorbis .oggs or video with vorbis audio on 11.2? If so, was it a fresh install or an upgrade system? Architecture? Etc.-I've run out of machines to easily test on, and it doesn't work on any of them.
I realize that this is better-addressed to the Packman mailing list, but very few users seem to read it, and for whatever reason, the packagers never seem to have any problems with their own packages (even when they are clearly broken for many others); so I thought I would give it a try here first.
A Happy and Prosperous New Year openSUSE!!!!
When a tv stream is opened with smplayer it goes nowhere.
A snippet from the smplayer log:
[10:20:47:604] Playlist:layItem: out of range
[10:20:47:604] BaseGui:laylistHasFinished
[10:20:50:387] Core::changeOSD: 1
[10:20:50:388] Core:ausing_prefix
[Code]...
Not sure when this first happened but I suspect it was just a couple of days ago. I had installed DeVeDe to burn some video to disc and it all worked fine but now when I try to run DeVeDe it says it can't find mplayer and you have to quit. I've tracked this back to mplayer and I'm getting this error from mplayer:
mplayer: error while loading shared libraries: libvdpau.so.1: cannot open shared object file: No such file or directory libvdpau is installed so I don't know why it can't find the library.
I see there are issues with vdpau and nvidia but this shouldn't be affecting me should it??
I have the restricted format software installed via one-click-install. I found that in 11.4 mplayer would fail to start playing a MP3 clip, but succeed on the second and subsequent tries, but only within a short time afterwards. A quick examination showed that this was because mplayer was firing off an instance of pulseaudio, which stayed around for a while, then exited. This was not acceptable for a clip played from a cron job so I found the way to bypass pulseaudio for mplayer was by putting this line in ~/.mplayer/config:
Code:
ao=alsa
Worked fine afterwards. I don't know if this affects the ability to output audio from other apps while the sound device is in use, but I don't have that situation, so this workaround suits me.
I'm not able to reproduce a configuration which I had before.
The plot: openSUSE 11.1 i586, seamonkey 1.1.18, MPlayer dev-SVN-r30099-4.3-openSUSE Linux 11.1 (i686)-Packman = MPlayer-1.0rc2_r30099-1.pm.1.1, mplayerplug-in-3.55+cvs20090923-0.pm.2.2
My old system which died in a catastrophic hardware failure did write the URLs of all movies played with mplayerplug-in to a file located at $HOME/Movies/playlist.
How can I configure the new system to do it again?
I have recently installed openSuse 11.2/Gnome. I am having some woes. Vlc plays CDs and DVDs but Xine or Mplayer won't.
[Code]....
I downloaded the mplayer essential codecs pack and extracted in directories mentioned.I even compiled mplayer and it can play now almost all the files. But I am having a problem.The problem is that other multimedia players dont play even a single file.I tried with xine,totem,kaffiene and every bundled player.
View 6 Replies View RelatedI'm trying to play quicktime (streaming) movies in firefox and therefore followed this guide: MPlayer Mozilla/Firefox plugin But it didn't succeed as i don't find the mplayer plugin in my add-ons of firefox. I placed the mplayerplug-in.so file into /home/.mozilla/plugins and /usr/lib/mozilla/plugins folder but without success.
View 7 Replies View RelatedI can't seem to watch 576p or 720p files without either VLC tearing and blocking or MPlayer freezing for a few frames, or stuttering. I can't figure out why.
I have a Intel Q6600 and a GTX480 with the latest drivers on OpenSUSE 11.4. Qt 4.7.1
On VLC 1.1.8/1.2.0 I've tried X11 video out, XVideo video out and GLX video out. I've also tried enabling hardware decoding under Advanced > Inputs/Codecs > FFmpeg to no avail.
On MPlayer 0.6.9, I set my cores to 4, and and tried XVideo output and VDPAU output.
I am not able to play certain movie files with MPlayer since a few days:
Code:
MPlayer dev-SVN-r32749-4.4-openSUSE Linux 11.2 (i686)-Packman (C) 2000-2010 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing somefile.wmv.
ASF file format detected.
[asfheader] Audio stream found, -aid 1
[asfheader] Video stream found, -vid 2
VIDEO: [WMV3] 640x480 24bpp 1000.000 fps 1500.0 kbps (183.1 kbyte/s)
Opening video decoder: [dmo] DMO video codecs
DMO dll supports VO Optimizations 0 1
DMO dll might use previous sample when requested
MPlayer interrupted by signal 11 in module: init_video_codec
I am not sure which filetypes are affected by this bug, but I can play *some* files. The specific file here used to work a few days ago.
Code:
kalle@hoppers:~> file somefile.wmv
somefile.wmv: Microsoft ASF
The only major thing referring to multimedia in the past few days I remember is installing 'h264enc' from Packman, however, meanwhile I uninstalled this package, yet the problem persists.
Code:
kalle@hoppers:~> grep h264enc /var/log/zypp/history
2011-01-15 20:11:53|install|h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers|Packman|c5bd1d534726472929134e5acc8f66492c52c51b
2011-01-20 22:06:20|remove |h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers
The only way of solving this was moving MPlayers config, but that did not help either.
Xine also is not able to play this video:
Code:
kalle@hoppers:~> xine somefile.wmv
Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6.
(c) 2000-2007 Das xine Team.
[wmv3 @ 0x8f78060] Extra data: 8 bits left, value: 0
xiTK received SIGSEGV signal, RIP.
Everytime I shutdown/restart my computer without properly turning off the Tor network and get the following message from Vidalia:
"Vidalia detected that the Tor software exited unexpectedly"
The only way I can get Vidalia to work again is to reinstall Vidalia.
I am running following command which is giving error
Code:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/trovalds/linux-2.6.git linux-2.6
Initialized empty Git repository in /home/tapas/LKP/pandora/linux-2.6/.git/ fatal: The remote end hung up unexpectedly Some one suggested me to check my firewall I am not clear as which port does git uses.
I downloaded F10 x86_64 live Developer Spin ISO file from fedora project spins website and burned it onto a DVD...Now when I try to boot from it, I get a menu as usual. Here I select the 'boot' option. Now it shows a 'loading' page with a progress bar and 'Fedora 10' written on the right side [as usual].. After that, on the next page I get the following error..
error: unexpectedly disconnected from boot status daemon I somehow did a reboot, and again the same problem. Microsoft XP and another Fedora are already installed on the same system..
am running centos5.3 on a virtual machine and was trying to do some basic hardening and part of it i had to modify the pam.d/system-auth file and from then i am getting a fatal error whenever i try to connect via ssh using putty i am not at all able to login the server with any of the accounts even root also.I am scared unknowingly did i lock the system???how to resolve this issue?
View 3 Replies View RelatedI am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.
I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
Since a couple of weeks ago, almost everyday (and some days more than once) my keyboard does strange things. Mainly, the accents (etc) don't work (they come 'a'e'o), and that's important for me.It happens unexpectedly; at least I have not been able to put it in relation with something I did (anyway, it had never happened before).In Personal settings -> Input Devices -> keyboard everything looks normal, nothing changed.I don't know where to begin to find a solution. The only thing I can do now is to reboot.
View 3 Replies View RelatedSince the latest update the gnome main menu quits unexpectedly whenever I try to select any funtion e.g. shutdown. In addition the network manager does not show up and does not configure the network (wireless). This behavior is since the latest update last week. Has anybody seen this as well? How can I revert to the previous state?
I updated Samba to 3.5.1 as shown in: Fixing "Authorization Dialog" bug in Samba for 11.2 - openSUSE ForumsWhen I copy files between two copies of Samba in two openSUSE 11.2 PC's with the new update, I get Samba Process Unexpectedly Died (in Dolphin). This happens going from Computer 1 to 2 or 2 to 1, it does not matter and the error is the same.
After reverting back to Samba version 3.4.2 in both PC's, all files copied between PC's work fine again. Though the "Authorization Dialog" bug is gone, not all seems right with the newest update version.
I have trouble when typing in Open Office Writer, Kmail, and zim, among other applications. It's not due to unintentional use of the 'insert' key, either.When I type in these applications, the word I am typing often disappears entirely if I don't add a space, return, or punctuation at the end of the word, or use the arrow keys. For example, when setting up a profile in Kmail, I typed my email address into the settings dialog box, and it kept removing the last part of the address: "myname@univ.edu" would always become "myname@univ." unless I added a space after the edu.
When I first encountered this behavior, in Writer, I thought it was a bug with the AutoComplete feature. But now that I've seen it in other applications, I think it is something more general. how to stop the unexpectedly deletion of words while typing?
I install Mplayer from Install/Remove Software and I can't find it. I reinstall it but without any success.
View 9 Replies View RelatedI am having a problem with my touch-pad on my Dell Inspiron 1525. It needs to be adjusted for speed and it starts scrolling unexpectedly. I understand I need to install a driver for it but don't know how. The problem I see with Linux is that it's not easy to install software for new users. I have ran into a few One click Installs and managed to work them out quite easily. Usually the documentation you find online to install programs assumes the end user knows how to install.I need to know how to install the touch-pad driver from start to finish and all steps in between.
View 2 Replies View RelatedI have a problem between a jail root (so a group of users can access through sftp to Apache directory (var/www) an not get out of this directory.
1. I have the group 'sftponly', I need to access / var / www for sftp (read only)
2. On the other hand I need that user www-data (Apache) is the owner or at least have write permissions in the same directory (/ var / www)
The problem comes when the two needs together, as from what I read, to do jailroot in a directory is necessary for the owner is root and any other user has write permissions on it.
If along the jailroot with write permissions then attempt to connect to the client via sftp throws me the following error: "Error: Server unexpectedly closed network connection"
Permissions system User/group/Others doensn't work to me, so I tried it with ACL, but I have the same problem when I grant write permissions to the apache user.
Does anyone know how can I do for the user www-data can have write permission in the Apache directory and be able to create a user or group of users who are "locked"in this directory to enter sftp?
I am using Centos 5. I got one error unexpectedly after some configuration for rsync and folder settings. The error i am getting is "Serve Authorization directory (daemon/ServAuthDir) is set to /var/gdm but does not exist. Please correct the configuration and restart GDM." after rebooting.
I tried to resolve the issue by setting permission for folder /var/gdm to 755. but the problem is still not resolved.
I'm using Postgresql 8.4.2-2. I'm trying to remote into my server securely. I figure I could do so with ssh. Apparently I figured correctly, as per, [URL] and [URL] I setup the ssh tunnel. ssh -L 5432:serverip:5432 Then I setup pgadmin3 to connect as follows:
host: localhost
port: 5432
user: postgres
maintenance db: postgres
And I receive the following error:
An error has occurred: Quote: An error has occurred: Error connecting to the server: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request.
I'm not sure what the problem is. I can connect with Code: psql from the cli after connecting to the terminal via ssh. So I know that I'm using the correct password.