I am getting "out of memory" error when i am trying to format 8GB pen drive in ntfs format .So, i added two swap partition 64MB (as my device has 32MB RAM)to increase mem.but swap space used is max 1000Kb.
View 3 RepliesI get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
I have been setting up a vps I got out with bhost.net, with CentOS installed. I've been learning and have set up everying I need with the exception of ftp/sftp.
Using yum I installed vsftpd and ran into problems, thinking it was something I might of done I did a fresh install of CentOS and I still recieve the same problem on a fresh install so it is nothing I have done to the server.
The problem is when connecting via a sftp client I get an out of memory error. This error is listed in the putty faq ( url ) under A.7.5, there is a brief explaintion of the cure under A.7.6.
there is mention of a login script but I don't know where this is located. I'm a novice at Linux but by no means incompotent when it comes to computing.
When I use top to see memory usage, I have 65gb ram but only 1.3gb of it free and remaining is shown as used. When I ran my program It gives memory insufficiency error. Although no other program is using the remaining 63.7gb ram it is hold. How can I get free the unused ram?
View 3 Replies View RelatedI am using malloc and frees a lot in my program. It shows its allocated but when i remove it doesnt show as the memory is removed(I am using the top command to view VIRT memory usage). If this continously grows what would happen to my program (Will it go out of memory?)
View 4 Replies View RelatedI have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
View 1 Replies View RelatedThis is my first post in these forums. I'm still quite new to Linux (using Mint 9) so please bear with my not-very-articulate question(s)When I boot up and open up a tty terminal I get a message saying "Memory corruption detected in low memory." I've done an extensive google search about the issue and it seems not uncommon. I ran a memtest with no errors returned, so I'm sure that there's nothing really wrong with the memory; apparently it's a bug in the kernel that's causing this.
View 2 Replies View RelatedI found from command 'top' that 8GB memory are used. However, using command 'ps' with some options to grep the running processes and then summing up the memory used by the running processes are less than 2 GB. Where has the used memory gone ?
View 7 Replies View Related-bash-3.2# tar -xzvf lzo-2.03.tar.gz
gzip: stdout: Cannot allocate memory
lzo-2.03/
lzo-2.03/src/
[code]....
This is on a VPS with 256mb memory. vmstat and /prov/meminfo both show that over 200mb is free.
I am hosted on a VPS (OpenVZ) with:
Memory: 3gb
Burst: 3gb
OS: Cent OS 5 32 bit
Java Version:
Quote:
java version "1.6.0_17"
OpenJDK Runtime Environment (IcedTea6 1.7.10) (rhel-1.20.b17.el5-i386)
OpenJDK Server VM (build 14.0-b16, mixed mode)
I am receiving an error when I start bukkit (a minecraft server software). I have properly installed java. And I am in the correct directories.
Code:
java -Xms512m -Xmx2600m -jar craftbukkit.jar nogui
After doing that command I get the following:
Quote:
[root@server1 Minecraft]# java -Xms2600m -Xmx2600m -jar craftbukkit.jar nogui
[Lnet.minecraft.server.Statistic;@1319c
146 recipes
[Lnet.minecraft.server.Statistic;@1319c
16 achievements
[Code].....
Do notice the line in the above quote ""sh": java.io.IOException: error=12, Cannot allocate memory."
The server will generate a world, but you can not connect to it using the MC client. Does anyone know what the problem is? I have googled for this problem for literally the past 4 hours and I am getting no where.
I have an application running on a dos box and the log files when trying to open sometimes give an out of memory error. It doesnt affect other functionality on the box though. Now I am porting this application to a linux box. What I wanted is how important it is to implement a wrap around for this log. What happens when it exceeds a limit except for trouble viewing that particular file. Another thing I noticed is when i open the file on dos with edit it gives the error whereas with other editors it opens file. Is there some configuration file that maintains this.
View 4 Replies View RelatedI tried to install OpenSuse 11.3 on my brand new pc, which already had Windows 7 proffessional in it, and I went step by step through the installation without changing anything. It didn't work. I tried for a second time and this error message kept popping up: "Creating device modes with udev 2.0436224] [drm: i915_diver_load]*ERROR*Detected broken BIOS with 262140/2644kb of video memory stolen. 2.0436224] [drm: i915_diver_load]*ERROR*Disabling GEM(try reducing stolen memory or updating the BIOS to fix)"
And then a lot of letters and numbers wich make no sense to me. Now the only way I can initiate OpenSuse is with the OSuse boot dvd and on failsafe mode.
Today, I burned a copy of Lubuntu 10.10 Maverick Meerkat and tried installing it on my old 2.4Ghz Celeron 192MB RAM (actually 256MB with 64MB dedicated by the BIOS for the internal video card) laptop, which installed Lubuntu 10.04 Lucid Lynx with absolutely no problems. However, when I tried inserting the disk for Maverick this time around, the live CD boot always hangs during Plymouth, and pressing Esc shows:
Code:
Generating locales. en_US.UTF-8.I modified the boot options and removed splash and quiet, and I got a whole lot of messages that seemed like errors, but I think the root of the problem was this:
Code:
Out of memory: kill process 620 (localedef) source 929 or a child Killed process 620 (localedef) VS2: 59500kB, anon-rss: 57596kB, file-rss: 820kB After that, it got a few messages about localedef timing out for 120 seconds or something. Now I'm no idiot, I'm well aware that my laptop is cutting it very close to the minimum RAM requirements of the live CD, but it's just the live CD that stops me from running Lubuntu, because once it's installed, I have no problems. I ran Lubuntu 10.04's Live CD with no problems and the installed LXDE system ran amazingly fast. I'm sure if I could just install Lubuntu 10.10, it would run at the same speed. The problem is that the Lubuntu wiki still writes the minimum system requirements of:
[Code]..
So, I was working with Ubuntu 9.10 and I wrote a C program which was working just fine. Then, I have installed Ubuntu 10.10 and tried to run this same program again. However, I get the following error: Code: Memory Mapping failed. Error: 1 Part of the code has the following: Code: volatile ulong *memory;
int fd = open("/dev/mem", O_RDWR | O_SYNC);
if (fd < 0) {
printf("Could not open memory.
");
return(0);
}
code....
Does anyone have an idea what the problem could be? I do not know if there would be any significant change between Ubuntu 9.10 and 10.10 that could be generating me this problem.
Last night a RHEL server in our cluster unexpectedly ran out of memory and became unable to perform its purpose. I say unexpectedly, because it had been purring away for ~385 days of uptime without a twitch. It has 16GB of memory, of which on average 2GB are in use. I see no unusual traffic in e.g. HTTPD log files. how to approach tracking down why this might have happened, with a view to preventing a reoccurrence.
View 2 Replies View RelatedHas anyone seen this error in libvirtd?libvir: QEMU error : out of memoryWhatever it is, I'm pretty sure that's what's keeping my virt-manager from working. There's 12GB of DDR3 on this box, so I really really hope that it's not actually a memory problem. This here is a brand-new whitebox I build just for virtualization on F11. Can anyone here help me make it work?
Edit: This is a 64-bit install. All 12GB are accessible by the OS.
I have OpenSuse11.4 32bits, 4Gb of RAM
[code]...
I would like to add the option mem=4096M to make some software works. but as long as I try with more than 512M, I have the error: error 28 selected item cannot fit into memory.
Wine is useless on one of my computers running lucid 32bits. If i try to run a program through wine or even winecfg I get the error:
wine: virtual memory exhausted
I have tried shredding all the files in the .wine directory, removing every package that have anything with wine in their name in synaptic, and sudo aptitude purge wine.
While Apache is off, then everything is OK, but if I start apache server after some time I get messages "Unable to fork: Cannot allocate memory" when trying to do some commands with ssh(dir,rm,top and so on).
P.S. There is free RAM when I get that message.
After CentOS5.3 install to /sdb7 partition (on 2nd HD) and using Ubuntu Grub(on 1st HD mbr) to boot CentOS, I get "memory for crash kernel 0x0 to 0x0 not within permissible range" as soon as CentOS starts. I have 2G of ram. The message is on every boot. I've had several other linuxes on that partition without such an error message. Otherwise the OS starts fine. Is the message of concern/import?
View 3 Replies View RelatedI am having a problem with lockups on a new FC12 box (dual core 3 ghz, 4 gb memory,HDPVR,nvidia 8400gs). This happens reliably when replaying MythTV videos, but also randomly at other times using other apps (I suspect also boot but I can't be sure; it just occasionally stalls part way through the boot display).
Usually but not always this is accompanied by a kernel panic (caps lock + scroll lock lights flash on keyboard).
I did a core dump with kdump and it reports:
Thread 1 (<main task>):
Cannot access memory at address 0xffff880028025b70
I am in the process of running memtest86+ right now, and it's been through several passes without errors. I know it needs to run more, but given the reliability of this problem with MythTV video playback I am wondering if the problem could be in the video card memory.
Does anyone know of a linux (or bootable) tester for video memory? All I am able to find are some things for windoze like this.
Also is there any way to track that address from the core dump back to a physical location?
I am using Centos, in that i am executing normal stand alone java programs. Some time i am getting "java.lang.outofmemory heap space" error. how to increase the heap size. I tried with the command java -Xms256m -Xmx1024m but its not working for me.
View 6 Replies View RelatedI am having a problem with lockups on a new FC12 box (dual core 3 ghz, 4 gb memory, HDPVR, nvidia 8400gs). This happens reliably when replaying MythTV videos, but also randomly at other times using other apps. Usually but not always this is accompanied by a kernel panic (caps lock + scroll lock lights flash on keyboard).
I did a core dump with kdump and it reports:
Thread 1 (<main task>):
Cannot access memory at address 0xffff880028025b70I am in the process of running memtest86+ right now, and it's been through several passes without errors. I know it needs to run more, but given the reliability of this problem with MythTV video playback I am wondering if the problem could be in the video card memory. Any linux (or bootable) tester for video memory? All I am able to find are some things for windoze such as this. Also is there any way to track that address from the core dump back to a physical location?
I am using Fedora 7 for making a server. I have installed Kaspersky mail gateway solution on that. but the solution is not working. I found an error in the message log file that is Mar 30 20:29:28 srfed kernel: mailgwd[2452]: segfault at 00000008 eip 084ed6a5 esp 003340d0 error 4 It means that the process for mail gateway dropped for some reason. I need to see the memory dumps and save them for future use.
View 1 Replies View RelatedI have decided to load the OS on a old HP Compaq DX2000 MT to see if its for me before putting it on my main machine.
I loaded Ubuntu version 10.10 last night everything was fine except I could not get my wireless adapter to work, I decided to connect via ethernet to get the latest updates and drivers.
After the updates and restart I now get the non executable memory error. when I enter
/usr/bin/check-bios-nx --verbose
I am told I have NX capabilities and should go to the bios and enable it. There is nothing in
the bios to enable as far as I can see. So I enter the command
sudo rm /etc/update-motd.d/20-cpu-checker
I wrote a test program for learning usage of realloc() and I thin I did everything right but I get this error exactly with my 4th time that while tries to reallocate memory in MakeDSt function for DSt->SArray:
Quote:
realloc(): invalid next size
this is my complete code :
Code:
#include <stdio.h>
#include <stdlib.h>
typedef struct DRA
{
code....
Fedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
let me know how to clear cache memory ( RHEL 5.1 ) as it consumes almost 100% physical memory.
View 3 Replies View RelatedI am looking for free database that has low memory usage and innodb and memory like engins that has C API and support trigger and client/server support for using in embedded linux systems.
View 8 Replies View RelatedI am new to C and linux. My code below does arbitary writes but I cant figure out where or how it does it.
I am calling the insertNode() function with seq = 'MISSISSPPI$' and alphabets = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ$'
Code:
Weird behaviour I should mention is that when I check for NULL pointer in node->child[index], the unassigned values are not null anymore, they point to arbitary memory.