I wrote a test program for learning usage of realloc() and I thin I did everything right but I get this error exactly with my 4th time that while tries to reallocate memory in MakeDSt function for DSt->SArray:
Quote:
realloc(): invalid next size
this is my complete code :
Code:
#include <stdio.h>
#include <stdlib.h>
typedef struct DRA
{
code....
I'm trying to write a C program that extends an array to any user inputed size.
Code:
if (arraysize == 0) {
arraysize = (int) pos + 1;
a = (int *) calloc (arraysize,sizeof(int));
for (i = 0 ; i < arraysize ; i++ )
a[i] = -1;
code....
The program dumps with that sequence of inputs everytime, but might dump an input before or after if different positions are requested. Interestingly, when I tested pos = 2000..2008, I got no dumps. So is realloc somehow trying to extend the array into bad space?
I have a string problem with a function I am writing and I cant figure it out. I am trying to write unit test which will verify it works as expected. As I need to make use of it elsewhere and obviously robust and correct enough that I can rely on it. Okay first of all I define the following structure
Code:
typedef struct strarray {
int size;
char **elements;
} strarray;
code....
My problem is that upon the 4th iteration in the loop realloc fails in strarray_add. glibc reports invalid next size.
So I've been writing a code and I have been adding functions to make life easy, but all of a sudden when i added the last function I got this error *** glibc detected *** /home/ahzeeper/Desktop/C-code/check6: free(): invalid next size (fast): 0x0804c048 ***followed by a huge backtraceNow here is my code
#include<stdio.h>
#include<stdlib.h>
#include<math.h>
[code]...
I am writing a game in C with SDL. I can successfully display one image on the screen and animate it. However, I am having a lot of issues getting the background to display using the same method. I was asking for help on SDL related forums, but I determined that the issue is not SDL related, and it is actually a pointer issue. However, I can't find where I'm going wrong.
Code:
#include <SDL/SDL.h>
struct image
[code]...
alloc_task_struct( ) This function allocates 8 KB task_union memory areas. The function takes memoryareas from the cacheif it is at least half-full or if there isn't a free pair of consecutive page frames available.
View 3 Replies View RelatedBasically, I am running diskwarrior on my mac now to try and fix invalid b-tree node size error. It is my boot drive and therefore cannot get onto the operating system. I have used live linux distros to try and get at the hdd that way, I have installed HFStools and testdisk and tried almost everything possible from within Linux itself to recover this HFS+ drive, but they were all a no go. My last resort was to try diskwarrior and it is rebuilding the drive now, well it has been for about 38 hours now but doesn't give any indication as to how long it will take.
I am pretty sure I am right in thinking data is never truly deleted until it is overwritten, is that right? Even if reformatted, would I be correct in thinking that if I were to format the drive and install linux on my machine, some of the data on the Drive would still be technically recoverable, even though the file system has changed? i.e. from HFS to EXT3. If this is technically possible what software would I need to try and recover files from a drive that has been formatted from HFS+ to EXT3?
It doesn't matter if I cant get it all, or might be more hassle than its worth, my girlfriend has another laptop to use for now and is in no hurry and I like getting to play around with Linux. The data is somewhat important but not enough so to go through the whole sending off the drive and paying hefty fees, it would be very nice to get back and I enjoy working in linux and learning more about software/hardware etc.
I am writing a function(in C language in Linux) to initialize an array of a structure from a mysql table by calling a function by reference but I have a problem with call this function by reference . this is my program:PHP Code:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code]...
after upgrading ClamAV to version 0.97.1 and run the command Code: clamscan -r -i / --exclude-dir=^/sys --exclude-dir=^/dev --exclude-dir=^/proc | mail -s "clamav scan report XYSERVER" xy@mail.com the following errors appeared:
[Code].....
i have an application that launches several pthreads, i know that the default size used by Linux is 8Mb for each pthread. However i would like to optimize the total memory usage by my application by decreasing the default stack size of each pthread to the needed resources. My questions:
- Are there any rules to set the pthread stack size.
- How to compute the memory needed by each thread.
- Is the malloc call inside a thread counted from the stack size of the same pthread?
I have recently decided to venture into online blogging and other things, and my friend told me wordpress is a great tool for this. I have set up my mysql database, and apache and php are all working fine, and when i copy my wordpress folder into my /var/www/, and edit the config file for my database, i point my browser to[URL] to get it up and running. But i only get the error: "Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 7680 bytes) in /var/www/wordpress/wp-admin/includes/plugin.php on line 302". Some googleing seems to suggest that this may be a problem with a php.ini file, but im assuming this is a windows based solution, and im not sure where/what a linux alternative is.
View 4 Replies View RelatedI have just started using Valgrind,which really is great. Most of the reported errors look kinda weird, though I can't really understand what's going on here, for example:
==00:00:02:52.033 7754== Invalid read of size 4
==00:00:02:52.033 7754== at 0x80B0987: MyCls::MyPrintf(long, char*, ...) (MyCls.cpp:270) ...
==00:00:02:52.033 7754== Address 0x47a5ee8 is 0 bytes after a block of size 296 alloc'd ...
==00:00:02:52.033 7754== by 0x809A6C1: ClsMain::taskRun(int, char**) (ClsMain.cpp:177)
==00:00:02:52.033 7754== by 0x816CFE8: main (main-C.cpp:2060)
==7754== ---- Attach to debugger ? --- [Return/N/n/Y/y/C/c] ---- Y
==00:00:02:57.410 7754== starting debugger with cmd: /usr/bin/gdb -nw /proc/7765/fd/1014 7765
GNU gdb Red Hat Linux (6.5-25.el5rh)
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as
"i386-redhat-linux-gnu"...Using host libthread_db library "/lib/libthread_db.so.1".
Attaching to program: /proc/7765/fd/1014, process 7765
MyCls::MyPrintf (this=0x47a5dc0, iPrm=3,
sMsg=0x6974320 "blablabla"...) at MyCls.cpp:270
270 cout<<endl<<"m_FilePtr="<<hex<<m_FilePtr<<dec<<endl;
Basically, Valgrind reported the "Invalid Read" error at line 270 of file MyCls.cpp, which is simply a cout of the m_FilePtr variable, which is a member variable of the MyCls class. It's a FILE* variable I use to write repeatedly on a text file. The address reported (0x47a5ee8) is 296 bytes after the "this" pointer (0x47a5dc0),as Valgrind correctly tells me but I honestly don't understand that. And of course, I need to read that variable, not only for the cout (indeed,the error is reported at every reading attempt). Besides, the application doesn't crash, but still I would like to understand if I really have to worry about this "error".
Essentially my ksh script calls a program and passes some commands. It's entering the program just fine, but when it passes the commands it gets "invalid command" error, and loops for a bit.
When I run all the steps manually the program works fine. I turned debug on and see that it enters the program, cmbview, but for whatever reason, it fails on any command that it tries to parse.
Tried running it in a ksh shell, same error. Tried running it as bash shell, same error.
The cmbview exe works and the following commands work, so I can only assume its something with the script parsing the commands.
I'm learning how to program kernel drivers, and I'm making a hello world module for that. But I can't find the cause of some errors... My module as three files:
test_regulator.c: Code: /*test_regulator.c
2 */
3 #include <linux/test_regulator.h>
4 #include <linux/module.h>
5 #include <linux/kernel.h>
6 #include <linux/regulator/driver.h>
code....
I don't understand, because I had declared the test_regulator_driver.
I have been trying to build a file called main.cpp through my make file which is in Linux.
There are functions like
Which are being called. I have included all the necessary headers and also have included the necessary lib.a files in the make file as below:
I am still getting the below error. I use make -j makefile.mak clean all command to make the build.
I'm trying to compile the hidtouch driver, but hit a snag. The error I get is
[code]....
Context: this is the driver for the touchscreen attached to an LTSP client. The server uses the AMD64 arch, the client uses the 1386 arch, both Debian. The client does start, but lacking a pointer device the pointer is useless. The build takes place on the server, in the i386 chroot of the LTSP setup. Basically, I'm stuck now...
[root@shankar-lx src1]# make
gcc -c main.c
gcc -c database.c
gcc -c e_sqlite.c
gcc -o TEST main.o database.o e_sqlite.o /usr/local/lib/libsqlite3.so.0.8.6 -w -lpthread
[root@shankar-lx src1]# ./TEST
./TEST: error while loading shared libraries: /usr/lib/libsqlite3.so.0: ELF file OS ABI invalid
My application compiled well but when try to run, it is giving ELF file OS ABI invalid ERROR. What is this error.
Kernel version is 2.4-18
hey dude error in gnu c pointer
I am using Red Hat Enterprise Linux 5.0.
#include <stdio.h>
#include <stdlib.h>
int main()
{
char * cp = NULL;
[Code].....
Just installed Debian 8 last night and trying to run one a few of my scripts that use easygui (a front-end for python-tk basically) and I keep getting alloc: invalid block any time a file or folder selection dialog is presented. I'm able to select a file/folder with no issues, but once the dialog closes I get a variation of what appears to be a memory error followed by alloc: invalid block.
Here's one of my scripts that does it. This one pops up a file selection dialog pretty early on to ask for a file to check, and as soon as I select any file the dialog closes and that error appears in the terminal. It happens whether I run it with Python 2 or Python 3. You will need to install python3-easygui for this script to run properly if you want to check for yourself what happens. This is a first time encountering this error for me.
insmod: error inserting 'kernel.ko': -1 Invalid parametersI am getting this error when i am try to insert kernel.ko into kernelMy systemfedora 12 with gcc 4.4.2insmod kernel.koinsmod: error inserting 'kernel.ko': -1 Invalid parametersmy program
__________________kernel.c________________________ ___________
#include <linux/module.h> /* Needed by all modules */
#include <linux/kernel.h> /* Needed for KERN_INFO */
[code].....
I am trying to dynamically delete and add information into the array "blah"
Code:
int blahsize = 1;
char** blah = (char**) calloc(blahsize+1,sizeof(char*));
Adding information:
Code:
blah[1]=stuff1;
blah[2]=stuff2;
code....
Am getting errors about "mysql_connect()" for the following code:
Have compiled PHP with MySQL support using the following:
Thought PHP 5.3 has a built-in replacement called mysqlnd, and there's no need to install "php-mysql" RPM.
However, according to the following site this is still required: [url]
Give me an idea whether I really have to install php-mysql RPM in order to use mysql_connect() for PHP?
I recently had to move to a new machine, everything went well except for one thing. I did fresh installation of LAMP server all with default configs. Every time I'm using PHP script to that invokes include, require or require_once I get the following error:
Code: Fatal error: Allowed memory size of 20971520 bytes exhausted (tried to allocate 7680 bytes) in /var/www/index.php on line 2 index.php file: PHP Code:
<?php include "index.php";?>
icukapi.php file:
PHP Code:
<?php echo "test";?>
My memory_limit in php.ini is set to 20M. I tried to increase that however it didn't quite work. PHP seems to allocate all possible space and return that message every time i try. If somebody has an idea of how to fix it I would be more than grateful. I spend quite a long time searching for an answer however the all things i found suggested increating memory_limit which in this case doesn't work.
I've having problems with my Makefile.
I'm trying to create a program from 2 files - main.cpp that contains the main function, and modules.c that contains the definitions of the functions that are called in main(). modules.c only contain function definitions, no main function.
My Makefile is as follows:
Code:
I have included "modules.h", which contains all the function declarations, in my main.cpp.
When I try to make using this Makefile, I get the error
Code:
If I switch the order of modules.o and main.o in my $(TARGET) line, then I get errors that say "undefined reference to" the functions I have defined in modules.c, in main.cpp.
Code:
#include <iostream>
using namespace std;
[code]...
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies View RelatedI'm having a bit of trouble with a regular expression I'm trying to write and I'm not sure if it's something Tcl specific or my lack of regexp understanding.
[Code]...
I get a number of strings passed to a proc in the format 3|x where x is a number, either 0 or within the range 5-12. My understanding is that that regexp will match the literal '3' followed by a '|', the escapes the special meaning of |, and then 0 or, because of |, a number within the range 5-12. However I'm getting the error 'couldn't compile regular expression pattern: invalid character range'.
Need to handle SIGSEGV error when pbuf size is less than size. inside lib.:
for (i = 0; i < size; i++)
pbuf[i] = i;
I have an 80GB Intel X25-M SSD drive installed on a Linux box running Debian 5.0. The file system on the SSD is ext4. I've had no problems with the drive, and have been using it for quite some time as both swap file storage as well as a place to store a few large database files which require random access.
However, I noticed this odd size readout from ls:
> ls -lh /ssd
total 34G
-rwx------ 1 root root 23G 2010-12-11 18:00 file1.dat
-rwx------ 1 root root 22G 2010-12-11 18:00 file2.dat
I changed the names of the files here for security reasons, but other than that this is exactly what ls has output. Obviously, the total size readout is incorrect.
Here is the corresponding output from df
> df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 74G 35G 36G 50% /ssd
Despite this incorrect readout, the drive seems to be working fine, and diagnostic utilities turned up nothing wrong with the drive. Is this some sort of known bug in ext4, or is it more likely there's something physically wrong with the drive?
It's a Netgear FA311, and, as a brand, they've been good to me, but not this time.
When installed I get the briefest of lspci entries:
Code:
04:01.0 Ethernet controller: Device 0043:c290 So it seems to know it's an ethernet card but not much else.
the more verbose version gives the following:
Code:
04:01.0 Ethernet controller: Device 0043:c290
code....
... which is a long distance from being a healthy network card. Also some invalid memory going on there. Looks bad. I've already been though the thread on this link:url
but the person there seemed to be getting a least a recognition of the chipset, which I don't.