Ubuntu Installation :: Live CD Out Of Memory Error
Nov 13, 2010
Today, I burned a copy of Lubuntu 10.10 Maverick Meerkat and tried installing it on my old 2.4Ghz Celeron 192MB RAM (actually 256MB with 64MB dedicated by the BIOS for the internal video card) laptop, which installed Lubuntu 10.04 Lucid Lynx with absolutely no problems. However, when I tried inserting the disk for Maverick this time around, the live CD boot always hangs during Plymouth, and pressing Esc shows:
Code:
Generating locales. en_US.UTF-8.I modified the boot options and removed splash and quiet, and I got a whole lot of messages that seemed like errors, but I think the root of the problem was this:
Code:
Out of memory: kill process 620 (localedef) source 929 or a child Killed process 620 (localedef) VS2: 59500kB, anon-rss: 57596kB, file-rss: 820kB After that, it got a few messages about localedef timing out for 120 seconds or something. Now I'm no idiot, I'm well aware that my laptop is cutting it very close to the minimum RAM requirements of the live CD, but it's just the live CD that stops me from running Lubuntu, because once it's installed, I have no problems. I ran Lubuntu 10.04's Live CD with no problems and the installed LXDE system ran amazingly fast. I'm sure if I could just install Lubuntu 10.10, it would run at the same speed. The problem is that the Lubuntu wiki still writes the minimum system requirements of:
[Code]..
View 2 Replies
ADVERTISEMENT
Apr 19, 2010
I get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
View 2 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Apr 1, 2011
I have decided to load the OS on a old HP Compaq DX2000 MT to see if its for me before putting it on my main machine.
I loaded Ubuntu version 10.10 last night everything was fine except I could not get my wireless adapter to work, I decided to connect via ethernet to get the latest updates and drivers.
After the updates and restart I now get the non executable memory error. when I enter
/usr/bin/check-bios-nx --verbose
I am told I have NX capabilities and should go to the bios and enable it. There is nothing in
the bios to enable as far as I can see. So I enter the command
sudo rm /etc/update-motd.d/20-cpu-checker
View 3 Replies
View Related
Jan 8, 2011
I have been setting up a vps I got out with bhost.net, with CentOS installed. I've been learning and have set up everying I need with the exception of ftp/sftp.
Using yum I installed vsftpd and ran into problems, thinking it was something I might of done I did a fresh install of CentOS and I still recieve the same problem on a fresh install so it is nothing I have done to the server.
The problem is when connecting via a sftp client I get an out of memory error. This error is listed in the putty faq ( url ) under A.7.5, there is a brief explaintion of the cure under A.7.6.
there is mention of a login script but I don't know where this is located. I'm a novice at Linux but by no means incompotent when it comes to computing.
View 5 Replies
View Related
May 6, 2010
"The installer has encountered an unrecoverable error.A desktop session will now begin so you can investigate the problem or try installing again".It didn't get as far as giving me the option to check cd disc for defects, try without installing etc.9.04 and 9.10 installed fine on my two hard drives, so presumably this is not a hardware problem. During a desktop session I noticed a prompt to install proprietary drivers (graphics?). Could this be the problem? I don't have anywhere near the knowledge to 'investigate the problem'.
View 1 Replies
View Related
Aug 28, 2010
[URL] this thread had some information but i need some clarification as the results i got from the diaagnostics were not the same as the OP. my prooblemm is when i put the cd in the drive, i get this error:
Unable to mount Ubuntu 10.04 DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
when i type this command:
sudo mount -t iso9660 /dev/scd0 /media/cdrom
i get this message:
mount: block device /dev/scd0 is write-protected, mounting read-only
mount: /dev/scd0 already mounted or /media/cdrom busy
mount: according to mtab, /dev/scd0 is mounted on /media/cdrom0
[code]....
the fellow fixed his by adding or editing his menu.lst in grub, but since my results are not exactly the same as his i dont know what it is i should be adding or editing. but it seems to have something to do with installing generic ide drivers and disabling the flopy drive and another item that even he didnt know what it was doing
View 9 Replies
View Related
Oct 28, 2010
i have laptop Toshiba Satellite A500 with Intel i5 processor and Intel Graphics Media Accelerator HD , i am having this problem when booting from any live CD or USB when i choose "run from USB or Live CD " or even "install Ubuntu..." i got large list of error lines (as i think) and after that , no response until i manually switch laptop off. attached two photos and a small video that i could took as it is very quick .
View 5 Replies
View Related
Mar 16, 2010
I've been running my Dell Mini 9 with the latest alpha for 10.04 since January, but over the weekend I botched things pretty badly and decided to go back to 9.10.I saved my home directory to another machine, and proceeded to install from a 9.10 USB disk. Things didn't go terribly well (I kept seeing "devkit-disks-daemon" crashing) but the install did complete. I shutdown the netbook, yanked the USB drive and powered it back on only to be greeted the grub menu. Choosing any option yields: Code:error: out of memoryPress any key to continue...I did a little searching in places like:HTML there is no mention of that problem there, and running though the command line instructions has the same results. (the linux command seems to be the problem)I've tried re-installed grub from the directions on the page but it is failing with:
Code:
cp: cannot stat '/mnt/boot/grub/ufs1.mod': Input/output error
When I look up that file I see:
[code]...
View 9 Replies
View Related
Dec 30, 2015
When Debian OS is booted in to memory, this is a clean boot, because with the iso on the DVD can not be tampered with, but someone who has hacked your modem, can target your IP and can place a keylogger in the RAM memory, side-by-side of the OS, does not necessarily need to know zero-day-exploits of Debian (if there are any). Is that correct?
Moreover the trick, once known and automated, can be repeated every time you boot from the Debian Live DVD?
View 14 Replies
View Related
Apr 29, 2010
I'm trying to install ubuntu 9.10 on a new Dell studio 1535. Since I have 4GB of RAM I went with the 64bit version. I can get to the menu where I select to check disk, install, try without changing etc... However when I tried to check the disc integrity I saw the Ubuntu logo for about ten minutes and then let it sit for another 20 minutes, and all I saw was a blank screen. I then tried making another CD and came up with the same results. I then tried to install and at first it was like before, but then i started getting different error messages the majority had the form: [ 771.744543] Buffer I/O error on device sr0, logical block 337015another looked like:[ 1244.029631] end_request: I/O error, dev sr0 sector 673592a few said something about SQUASHFS.I have tried three different CD's I looked at the hash and they matched up so the file is fine. I downloaded the 32bit version and I'm going to try that just to see if it works.
View 1 Replies
View Related
May 5, 2010
I have the following problem: I burn a Cd with Ubuntu 10.04 and when I turn on the live cd pops up the following error: error_code 0 x73/0x80. Does anyone else have any idea how to deal with this?
Intel Celeron D 325 2533 MHz
ASRock P4i65GV
Ram 512 MB (PC3200 DDR SDRAM)
BIOS Type AMI (06/10/2004)
Video Card: WinFast A340 128MB
When you try to install pops up this error: 0 work_notifysig x13/0x1b.
View 9 Replies
View Related
Jun 28, 2010
I'm getting the following error when booting from the 10.04 live CD: Installation Failed. The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.
I checked the CD for defects, and even tried re-downloading/burning to a new disc, but got the same problem. I tried booting in to the LIVE session then installing from the desktop but I still got the same error. I have had 9.10 running on here fine, and after running a Kubuntu 9.10 disc I had to hand to check it would work, that installed fine (hence the auto-partitions you will see in my info dump below). Here is some information about my system, let me know if I've missed anything. I've also included a copy of the syslog below.
[Code]....
View 6 Replies
View Related
Jan 22, 2011
Put together a PC using the following:
Foxconn M61PMP-K AM3 NVIDIA MCP61P Micro ATX AMD Motherboard
AMD Athlon II X2 240 Regor 2.8GHz Socket AM3 65W Dual-Core Processor ADX240OCGQBOX
Patriot 2GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model PSD32G13332
HITACHI Deskstar 7K1000.C HDS721010CLA332 (0F10383) 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Plus an old case and PSU and an old 18gb IDE drive, and an old CD-RW drive
I put the CD in and boot the machine. The initial Ubuntu screen comes up ("Ubuntu" with the line of dots below it) for a few seconds, and then it disappears and I see this text:
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
At that point it hangs and will proceed no further. I've tried this with the latest Mythbuntu Live CD and the latest Ubuntu Desktop Edition Live CD. Both were x64 versions.
View 1 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
Feb 23, 2011
heres what happenned:
1. had working xp install on 320 gb hard disk with only one partition.
2. backed up and used easeus to shrink and create new partition on same hard drive.
3. tried to install from a working live cd but got medium not found error.
4. looked for fix but didnt find it so i used wubi to install it to the partition i created.
5. worked but annoyingly slow so looked for guide to switch from wubi to full install.
6. followed guide and it installed to a new partition i made with gparted and it formatted that one to ext4 but i still had the wubi install which i didnt want. (btw, non-wubi is much > wubi install).
7. went to xp to uninstall wubi, delete wubi partition, and grow full ubuntu install partition with easeus. easeus requires reboot.
8. restart comp to find an error that said no partition found and something else about grub rescue.
9. try live cds but hard drive not detected and tried win7 and xp but they didnt even get into setup
10. make plan: get bro to format my hardd disk using his compyter so i csn try ubuntu onw more time
i got a bunch of different types of errors but im really close to giving up on it entirely.
View 8 Replies
View Related
Jan 18, 2015
I am trying to install Debian over Kali since in order to use steam, newest version of wine and a few other things causes a change reaction that would require about two-thirds of my main os re-written with non kali files which makes me a little uneasy.
I have downloaded the debian-live-7.8.0-i386-gnome-desktop.iso from torrent from the link from debian download listings at debian.org. and I put it on a 8gb flash drive formated with gparted to a bootable fat32 partition and is listed as being /dev/sdc I installed the iso to the drive uss dd using the following code
Code: Select allsudo dd if=debian-live-7.8.0-i386-gnome-desktop.iso of=/dev/sdc bs=4M; sync
now it boots to the flash drive just fine with only the gnome3 drivers loaded by the live os isn't fully functional with my system. Ie. when I log into any of the live modes it gives me a message that it was switched to gnome3 [fallback] I am using the current version of gnome3 desktop manager installed from source on kali with out any trouble.
Also when I click the graphical installer or the installer modes from the grub i get a background image with some sort of artifiacts in the top inchish of the screen then everything but the mouse freezes. But when I go into one of the live modes and click the installer in their it opens just fine but when it starts transferring files it says that it couldn't transfer files from the cd after all the language and localization screens at the beginning.
I did find a misc page on the internet involving a cruchbang with the same problem [URL] I went to the folder in the usb drive in question and it looks like since that was originally post something has changed or it could have been a crunchbang format.
So basically I am asking did I do a step wrong should I try a different way of instillation, or do I have a corrupted image? also I am unable to use disk media due to the type of drives and disks I have access to.
View 4 Replies
View Related
Aug 4, 2010
I'm not entirely new to Linux, but I'm far from a standard user. I decided to give it another try with Fedora on my new Asus G60JX laptop. Specs: Intel Core i5 430m, Nvidia GeForce GTX 360m, Windows 7 Home Premium 64bit.
When I attempt to run the live CD from either a physical CD or a bootable flash drive, it loads as usual. However, once Fedora goes to the desktop, I get this screen:
As you may be able to tell, it's a garbled version of the Windows desktop I had previous to the reboot. Evidently, something in my hardware is not supported. However, I fail to see how I can install drivers when this is literally all I can coax the computer into doing.
View 13 Replies
View Related
Dec 1, 2009
I had been trying to install Ubuntu 9.10 after formatting my machine. When i select install of the welcome screen, the logo blinks for few minutes and then displays a error as
Code:
Unable to find medium with live File System
Then goes to busy box.
"The same thing appears with Ubuntu 8.10, which i was using before!"
View 2 Replies
View Related
Jan 29, 2009
Create symlink /dev/root and then exit this to continue the boot sequence.
Buffer I/O error on device sr0, logical block *******
sr 4:0:0:0 [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 4:0:0:0 [sr0] Sense Key : Medium Error [current]
sr 4:0:0:0 [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
end_request: I/O error, dev sr0, sector 1395920
Clocksource tsc unstable (delta = -499902943 ns)
loops that during install. new hard drive fresh out of box. WD 320GB 7200 Toshiba Qosmio intell core duo i've installed with this same disk before previous hard drive died. installed over windows vista. this time im trying to install solo no windows disk to reinstall with, F10 only. I've tried other distros as well, Mandriva one 2009, Dreamlinux, and this one. i've suspected hard drive controller went out but i can format and partition the drive. also the cd/dvd drive is bad but im booting from cd fine. tried removing the cd drive and booting from an external usb cd rom, same errors.
im about to deploy and need my computer up and running ASAP. 7 months no entertainment is not good. when i use a linux boot disk from Ultimate Boot Disk (UBD) i get an error of - hda status no response and something about invalid heads dreamlinux pushes past the error till i get the error about cant start x server. about my graphics
View 1 Replies
View Related
Aug 25, 2010
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies
View Related
Dec 26, 2014
I'm trying to boot into the Live CD (64bit version) and it dies with an error "nouveau .... 0x8DF6 Init table command not found: 0xA9". Get the same error after I install and try to boot into Debian, it starts booting but errors out later.
Running Intel 4770K on Gigabyte Z97X-UD5H with 8G ram, Nvidia graphics card and several SSDs ...
View 3 Replies
View Related
Nov 27, 2010
I have intel motherboard(d102ggc2) and 4Gb flash drive.
I've created live USB using usb-creator-gtk(ubuntu 10.04)
There is no option "all fixed disks" in BIOS settings
(http://ubuntuforums.org/showthread.php?t=1616610)
Drive is formatted into FAT32 using GParted
(http://ubuntuforums.org/showthread.php?t=1167803)
Target
I'm tying to install ubuntu 10.10 or 10.04
Problem
I get "Boot error" when booting using live USB.
There are only two words(please let me know if i can get any other logs).
Issue is not reproducible on other env(hp625 and other desktop).
View 7 Replies
View Related
Dec 17, 2010
I reinstalled 10.04.(finally) on a single partition mounted as "/". everything went fine until I rebooted, GRUB began loading and then came back with "no modules name found". I found other postings with the same problem,[URL] but this method doesn't work with the Dmraid.
View 6 Replies
View Related
Sep 8, 2010
I've done a good few ubuntu installations for friends and colleagues and now my Dad wants in on the action. His PC is more than capable of running ubuntu 32 bit BUT I've hit a brick wall I've never come across before. I've burnt a CD image of the 10.04 iso from [URL] on my ubuntu box and for some reason, his PC just won't boot from it. If I select the option to manually select the boot source, all I see is the hardware monitor telling me things like CPU temperature. As for the Live USB - nothing whatsoever. Is it possible that I've managed to corrupt the iso file somehow?
View 3 Replies
View Related
Apr 28, 2011
Live CD: I dowloaded the ISO, burned it to CD, booted from this CD. It starts to load and I can see the purple background with the loading icons. Everything seems normal. But instead of ending up with the login screen, it ends up with a screen that says 'Please remove all bootup media and hit ENTER' or something like this. So I hit enter and then it shuts off my computer. That's it.
Live Stick: So I tried another option and created a stick with 'usb-creator.exe' that is on the CD. Then I start from that stick, but all I end up is a line of 'Syslinux bla bla copyright 20xx-2011'. That's it. Then it does nothing anymore. The cursor is blinking, but no prompt or whatsoever and keyboard input doesn't do anything.
Now something weird: When I insert Live CD and Live Stick at the same time and then boot my computer, then it boots into Ubuntu. Obviously it loads the first parts from CD and then the rest from stick. Because when I'm then in Ubuntu and try to format the stick, it says it can't do so, because there's system files from that stick in use.
View 5 Replies
View Related
Jun 13, 2010
I'm usin Ubuntu 9.10 and installed it a couple of months ago. I was trying to figure out how to use Synaptic to fix some dependancy errors I was getting, and set it to remove a certain package. It said it had to remove other packages as well to do this, well that ended up being Gnome and a whole bunch of other stuff. Silly me.So I was alright without having Gnome and went back to writing simple c++ from this book. I wrote a program to output a range of numbers and ran it but had written it wrong, so it would have ran on for hours. So I just killed the power and tried to start the comp again.
This time after the Dell boot screen it would tell me my system battery was low and strike F1 to continue or F2 to enter setup. Hit F1 and Im told that a file wasnt found and then it goes to the Ubuntu loading screen (The logo and some dots underneath) and then a black screen. Nothing else.I figured I needed to reintall and dont have any CDs so tried to make a live CD and this time when I try to boot from USB device get a "Missing Operating System" error.Its set to boot from USB device before harddrive. Need to know what to do to install again/recover old install.
View 3 Replies
View Related
May 26, 2011
So, I was working with Ubuntu 9.10 and I wrote a C program which was working just fine. Then, I have installed Ubuntu 10.10 and tried to run this same program again. However, I get the following error: Code: Memory Mapping failed. Error: 1 Part of the code has the following: Code: volatile ulong *memory;
int fd = open("/dev/mem", O_RDWR | O_SYNC);
if (fd < 0) {
printf("Could not open memory.
");
return(0);
}
code....
Does anyone have an idea what the problem could be? I do not know if there would be any significant change between Ubuntu 9.10 and 10.10 that could be generating me this problem.
View 3 Replies
View Related
Apr 7, 2010
I have an application running on a dos box and the log files when trying to open sometimes give an out of memory error. It doesnt affect other functionality on the box though. Now I am porting this application to a linux box. What I wanted is how important it is to implement a wrap around for this log. What happens when it exceeds a limit except for trouble viewing that particular file. Another thing I noticed is when i open the file on dos with edit it gives the error whereas with other editors it opens file. Is there some configuration file that maintains this.
View 4 Replies
View Related
Feb 20, 2010
I am getting "out of memory" error when i am trying to format 8GB pen drive in ntfs format .So, i added two swap partition 64MB (as my device has 32MB RAM)to increase mem.but swap space used is max 1000Kb.
View 3 Replies
View Related
