General :: Add Windows Vista To The Grub Menu?
Aug 16, 2011
I had Windows Vista installed on my computer and created a partition to install Fedora 15. I chose the option to install fedora on any free space, so it should have installed on the empty partition. When I boot up, there are two boot options. Fedora and Other. When I select other, it gives an error:BOOTMGR not found.Is there a way to add Windows Vista to the Grub Bootloader by editing the grub menu. I don't know if it will help, but here is what I get when I run fdisk in the terminal:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
View 1 Replies
ADVERTISEMENT
Oct 21, 2010
I installed Ubuntu onto a separate partition I have. Now however when i boot up, Grub (v1.98 ) gives m 5 options.
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery)
Memory Test (memtest86+)
Memory Test (memtest86+, serial console)
Windows Recovery Environment (loader)
With no Vista option.
When I run the recovery environment however, it runs just my regular vista boot would have. Is this just a name issue? Ideally I would like to have my Vista option back.
View 8 Replies
View Related
Sep 1, 2010
I had two OS in laptop windows vista and linux mint and when I used to start my computer I used to get different option for os like linux mint, linux mint memory check, windows vista etc.. but because of virus windows vista got crashed so I formatted disk drive C: which were containing windows vista and reinstalled fresh copy of vista.. but now when I start my computer vista start automatically, I do not see GRUB options to run windows os or linux mint..Is there a way to reinstall GRUB to get options like I used to get before formatting ?
View 1 Replies
View Related
Oct 17, 2010
I have just loaded version 10.04 on to my laptop in a new partition so I now have Vista, 9.10 and !0.04. The grub menu is showing the two ubu versions but Vista is missing. I have run the commands from this link http://ubuntuforums.org/showpost.php...00&postcount=3 but still no Vista.
maxwell@maxwell-laptop:~$ sudo apt-http://ubuntuforums.org/showpost.php?p=8008800&postcount=3get install os-prober
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 9 Replies
View Related
Dec 20, 2010
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
View 9 Replies
View Related
May 11, 2011
error: unknown filesystem grub rescue>
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
View 10 Replies
View Related
Apr 30, 2010
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Sep 11, 2009
I hav two 40 GB hard disks.RHEL5 is installed on 1st and Windows on 2nd. In order to use each OS I manually hav to go and change the "first boot device" option in BIOS setting and boot into required OS. GRUB doesn't show Windows in its boot menu.How can I make GRUB recognize Windows and boot into both OS using GRUB boot menu?
View 1 Replies
View Related
Aug 27, 2010
i have windows xp operating system yesterday i installed ubuntu9.10 dual boot when the grub gets loaded it gives me four options as follows
1) linux......
2) linux......recovery...
3) mem test...
4) windows...
when 1) linux is selected it loads ubuntu properly but. but when i select 4) windows a black page with GRUB written on the top left corner of the page is displayed and will not take any command... the only option i can do is hardboot.
View 21 Replies
View Related
May 24, 2010
I have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
View 2 Replies
View Related
Dec 20, 2010
i had windows 7 on my system and now i installed debian squeeze but grub does not show my windows 7 in menu for selecting how could repair this problem?
View 4 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
Mar 3, 2010
In trying to fix Windows suddenly not booting, I have arrived at the point where it does not even appear in Grub, and I cannot even begin to start it.
View 3 Replies
View Related
Jun 8, 2011
I have to test Ubuntu 11.04 across multiple systems in my company and enable dual booting with Windows Vista PE x86. On selecting the Windows GRUB entry, the Grub menu just loads again without loading Vista and thus enters into an infinite loop.
Fdisk -l gives me:
Code:
When I did a update-grub, the output shows that it detected and added a Windows Vista OS. Also, I went ahead and added "MyWindows" as an option as well which has (worked for all other versions)
Code:
Selecting either of the GRUB Windows entries just loads GRUB menu again. I'm very confused and this deployment is critical for my company.
View 5 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Jul 2, 2011
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
View 2 Replies
View Related
Jul 31, 2010
just installed opensuse 11.3 with kde when my last time working with linux was in 2006.
Now I installed from the Live-CD and everything went fine, only problem came after the installation when I noticed GRUB didn't find windows at all.
Now I did fdisk -l and here's the result:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code].....
View 5 Replies
View Related
Feb 18, 2010
I have been trying to edit grub to make windows vista the default but whne i got to the menu.lst it is blank. I use this from the official guide gksudo gedit /boot/grub/menu.lst and it still comes up blank as well as sudo gedit /boot/grub/menu.lst
View 2 Replies
View Related
Jan 9, 2010
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies
View Related
Dec 31, 2010
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
View 9 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Feb 23, 2010
I have a 250Gb hd on my Vista machine that I allocated 130Gb to an Ubuntu partition. Recently I had to reformat my Vista partition and now I don't have the ability to access my Ubuntu partition. What should I do?
View 1 Replies
View Related
Oct 28, 2009
How do I get "Windows Vista Home Premium" to show up in my boot menu? Right now is just says "Other". I am dual-booting.
View 5 Replies
View Related
Mar 30, 2010
I have installed f14 in my laptop. The hard disk partitions are as follows
Code:
# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code].....
View 4 Replies
View Related
Dec 25, 2009
Since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies
View Related
Jul 5, 2010
I've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies
View Related
Feb 5, 2011
I need some help since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 4 Replies
View Related
Jun 6, 2010
I upgraded to Ubuntu 10.04 recently and now have MBR problem. When selecting Windows XP from the GRUB menu the screen defaults to terminal mode with grub rescue> displayed. I admit I know little to nothing about Ubuntu, unix, etc other than I like what I have seen so far and am trying to learn more. I need to (unfortunately) use Windows and have data on it that I can't afford to lose. How can I repair the problem so I can boot Windows from the menu? Thank you
P.S. I was dual booting successfully earlier. I had the previous version of Ubuntu running with Win XP and everything was fine. The problem started when I upgraded to Ubuntu 10.04. I have tried reinstalling 10.04 with no success. If I am unable to get dual boot working my wish would be to save my Win data and then I can wipe clean and reinstall Win and Linux.
View 7 Replies
View Related
