i have configured dns but error always appear server could not be reached .my ip add 192.168.10.2 and files are named.conf,192.168.10.zone and server.home.com(hostname)and home.com.zone
View 1 RepliesI've installed Ubuntu Server 9.10 on a small VIA C7 pc. Every now and then (it can take days or hours) the server goes to sleep. It can't be reached by network. If I hit the keyboard it comes to life within a second.I've looked in the bios and I cannot find any option that would prevent this. I used to run Debian Lenny on the same machine and never experienced the problem.
View 6 Replies View RelatedI have 2 different networks :the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping [url]..... on the gateway machine, it works, while it doesn't work on the private network. Note: I am using VmWare 7, CentOS 5.
I could say that the problem in DNS:because when I use this command in the private network machine: [url]...., it says connection timed out; no servers could be reached ,while in the public one, it works properly.....
I would like to use ulimit -St <some number> to stop a process form running once the process has exceeded the amount of CPU time specified in the ulimt arg.
I have been able to get ulimit -t (or -Ht) to kill my process, but I need the signal to be something other than 9 and other than SIGXCPU.
Is there a way to have ulimit issue a kill -<somthing else> when the cpu time specified has been exceeded?
The following recipient(s) cannot be reached:
Im using slack ware 10.2 for may mail server.
When I try to delete a file, ( move to trash ) It says , The trash has reached It's maximum size! clean the trash manually. When I click on the trash icon on desktop it is empty. Where is the trash? Where can I delete these files ?
View 2 Replies View RelatedI have standalone Suse 10 SP3 that when I run
Code: # hostname webserver but when I run host command
Code: # host webserver;; connection timed out; no servers could be reached I would like to get the IP when I issue
[Code]....
I have a Linux server running CentOS with 2GB RAM. I am searching in google and also in this forum but could not find any luck yet. I am searching the way that we can receive notification by system to a specified email when the memory reached a specified value we defined.
Is there any tool or sort of shell script we set via crontab every minute to check that?
I am using xterm and sometimes when typing long commands into a small window, the command extends beyond the end of the line. On my old uni setup, when this happens, the cursor moves to the line below and you can see what text you have typed above however on my slack 13 setup, it overwrites the current line so you cannot see what you have typed! How can I set xterm to move onto the next line instead of overtyping?
View 14 Replies View RelatedI can reach the internet just fine with OpenSuSE but when i try to dig mx gmail.com
;<<>> DiG 9.7.3-P3 <<>> mx gmail.com
;; global options: +cmd
;; connection timed out; no servers could be reached
I don't know what to do, YaST always seems like it'll time out but eventually it reaches the internet. Can anyone give me some diagnostic commands to see what is slowing down the network on the server I'm running?
I can't connect to imap or smtp ports remotely.
Edit: I left out one thing, this is a mail server and a web server. Both are not currently being used as this is a fresh install of OpenSuSE
All other devices work fine with dig. Its just the server.
I have very strange problem with kernels 2.6.33 and 2.6.34. I have a wireless card Linksys WMP200 using rt61pci. It connects just fine using WPA2 and works, but in less than 20 minutes I still can reach any machine on my network, but this machine cannot be reached by the others (i.e. before these 20 minutes others can ping me). With default kernel 2.6.26 (Lenny) all is OK. I do not use any firewall. When this happens logs do not change - wpa_supplicant's log is normal (associated), syslog is fine, dmesg shows no errors. Sofar I have tried this:
1. acpi=off as boot parameter
2. both new kernels 2.6.33 and 2.6.34 are compiled with CONFIG_CF80211_DEFAULT_PS disabled
3. iwconfig wlan0 power off
4. Tried ndiswrapper. The device is up and scans fine but wpa2 is not working...
5. Compiled a kernel without ACPI
This is all I did without any luck and I really need the new kernels because I have a quatech device attached to the machine...
In the last week or so, I've frequently been running out of X server client connection slots and getting "Maximum number of clients reached" errors. For example, I'm getting it right now and I'm running 3 pterms, Chrome, and Thunderbird; I've even killed my panel. 'xwininfo -root -children' produces what seems to be an absurd number of X clients (150-ish, when it's able to make a connection), even immediately after Gnome/Xfce startup.
It doesn't take long. A day at most. I've had this system up and running for months, and this just started happening. I did install some X development libraries (x11proto-core-dev, libmotif-dev, x11proto-print-dev, and x11proto-xext-dev plus their dependencies) about two weeks ago, but this problem has not been happening that long. I've installed other packages, but nothing that would seem to have any relation to this problem. I've logged out and in, rebooted, and changed from Gnome to Xfce, and none of the changes helped.
I have done nothing with the system, but starting this morning, i experienced a strange condition on my desktop. I'm unable to open any applications at all. It will close instantly.
When i tried to run from terminal, it will give me an error like this:
Quote:
I checked using
Code:
And i got around 234 which is too much that it takes almost all of the open files allowed. Logging out to text and brings back X will solve the problem, but it's only a temporary solution until X opens more sockets again. I'm running -Current (32 bit)
It seems that there's a hackish solution in here: [url]. Dunno whether it's a nice solution or not, but i'm willing to try it.
I tried ubuntu for a few weeks, but I couldn't get the nvidia drivers to work, I tried everything. So, I got sick of that, and went to download OpenSuse, which seems to be even nicer (..... ) I downloaded the 11.1 liveCD (gnome) from here. I nicley got the welcome screen, and the option screen (liveCD, check errors etc.). I chose LiveCD and it started booting, I got the splash screen with the loading bar, and after it completely loaded, the screen turns black with a lot of messages and at the end:
Code:
GdmLocalDisplayFactory: Maximum number of X display failures reached: Check X server log for errors.
Great, I hoped for better luck after Ubuntu..
My sys. specs:
Asus F3Sc 32bit
Intel CentrinoDuo
[Code]...
I have centos 5.2.....i get this error while booting...the total hard disk is about 1160 GB....This server is used for file share....it has lots of datas........is it recommended to run fsck.....i am afraid that i will lose datas....is there any way to sort this issue....logs and fstab details are as follows
error on boot
FSTAB
Ever since upgrading to Fedora 14, my system has been almost unusable. I can only have a few windows of anything open before I start getting messages about:
Maximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedxwininfo: unable to open display ':0.0'
I am unable to open any new windows then and lots of programs crash.
When things are still running correctly.
A few minutes later:
I am trying to setup an HPC4400 printer attached to a Windows XP box on a Fedora-11 box with the latest updates and am getting the error " Cups server error Client-error-not-possible ". Using the Cups GUI on the fedora-11 box I can find the printer, I get verify that the shared printer exists but still get the message when I try to install it.
View 2 Replies View RelatedI hooked up an Hp deskjet portable to ubuntu and keep getting the above error when I finish installing the printer! How do I get by this? 10.04 LTS It's hooked up to LPT-1 port!
View 1 Replies View RelatedI'm trying to make the power manager NOT automatically shutdown / sleep / hibernate when battery power of my laptop reaches critical
I am surprised there isnt an 'NO ACTION' option for that in power manager
I've tried editing the acpi-supper in /etc/default bu couldn't find a solution in there nor in the /home/user/.gconf/apps/gnome-power-manager/ directory
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I am having a problem with our ibm x345 server, we cannot acceess the bios how to enable the bios tnx
View 3 Replies View RelatedI've been trying to install Ubuntu Server onto Microsoft Virtual Server at the request of my boss, and I've been having an issue I cannot seem to work around. Now my background on Ubuntu and linux in general isnt amazing, I have configured server at home to act as a file sharing platform and a media server, but thats about it.
Now I've gone to install it on the MVS at work and once the install completes, I recieve the following error: Hypervisor error.JPG
I've tried running the install but limiting the resolution, but from what I can rememeber server doesnt install the GUI to start with, so it should just be showing me the standard CLI.
I have SUSE Linux Enterprise Desktop 10 running on HP Mini 2133. It's been working like a dream since I got it, but one day I got the following error message when booting it: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose problem? <Yes> <No>.
X server output says alot of things, but I think this is the most important:
(==)Using config file: "/etc/X11/xorg.conf"
ACPI: OSPMOpen Called
ACPI: Opening device
(EE) VIA(0): No valid modes found
I then get the login:. I'm able to login, but I have no clue on what to do. How can I fix this?
i have a problem with my server, it was rebooted to get a special upgrade and it never turned on again. the support told me it's giving grub error 15, file not found. my server is a debian lenny 5 32bit one in raid 1. my menu.lst is:
[URL]
and fdisk -l gives:
Quote:
root@grml:/# fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
[code]...
Disk /dev/md0 doesn't contain a valid partition table
I am trying to install SAP Gui for linux 710r9 on fedora 10. After installing and configuring the client correctly I was able to LOGIN in to my SAP and use it properly, but when I select connect it gives me error box saying "Error when starting "gmux sever"." how to remove this error.
View 1 Replies View RelatedI got an error while uploading a file named "xxxxxxxx.php"to linux server
Error in detail
Upload of file 'xxxxxxxx.php' was successful, but error occurred while setting the permissions and/or timestamp. If the problem persists, turn on 'Ignore permission errors' option.
Permission denied.
Error code: 3
Error message from server: Permission denied
Request code: 9
My Server is not booting up throwing the error
Code:
Supervise:fatal:unable to start log/run :file not exist
and in single user mode also i'm not able to get the bash prompt same error is repeatedly coming ,this error comes up after i rebooted my Box
I configured a svn server with apache. But while checking out it give the error as follows:
PHP Code:
It's on suse 10.
Our websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happened. I am looking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficient CPU and RAM resources. Where and which log files must be checked to avoid future download times (it is our Company web page!!!!)
View 5 Replies View Relatedi am trying to configure below commands and it through error some one can advise where to check and how to fix this issue
[root@2rem .vnc]# vncserver :1 -name 2rem -depth 16 -geomatry 800x600
You will require a password to access your desktops.
Password:
Verify:
xauth: creating new authority file /root/.Xauthority
Unable to start Xvnc, exiting