My Server is not booting up throwing the error
Code:
Supervise:fatal:unable to start log/run :file not exist
and in single user mode also i'm not able to get the bash prompt same error is repeatedly coming ,this error comes up after i rebooted my Box
I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity):
[ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6
[ 7.376480] ata2.00: BMDMA stat 0x5
[ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns }[code]....
I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error.Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem.Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc.
The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives.I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu.
I am very new to sendmail and I have tried all the way to configure the send mail but not succeeded with it.
Server info
Sendmail build /version
When I am trying to start the sendmail serving its throwing the error:
I had Ubuntu 10.04 installed entirely on my 750 gig SATA drive. Yesterday I backed up my /home and installed a 200 gig drive and reinstalled using the 200 gig drive as / and swap. The 750 gig drive was all /home. Now, whenever I reboot it comes up saying it had serious errors mounting /home and I have to reboot again to get it to boot up. I never had this issue when the 750 gig drive was running the entire show. Has anyone else run into this? S.M.A.R.T. hasn't been throwing any warnings or errors so I am at a loss as to what "serious" errors Ubuntu could be running into.
View 3 Replies View RelatedI have some institutional sw that requires Sun JRE and is throwing the following error during install:
blah blah agent has been designed for the Java Runtime Environment provided by Sun Microsystems. It can be downloaded at no charge from url.
Your machine is currently using GNU Java Runtime Environment.Please modify the system environment to use Sun JRE.
If you have already downloaded the Sun Java make sure that it appears *before* GNU Java in the PATH environment variable.
I dl'ed and installed jre-6u13-linux-x64.bin, but how do I make sure it's first in the PATH? Because I still am unable to install the sw.
'Software update center' is throwing error. The error was uploaded to LaunchPad. Following is the like to it: [URL]
Following is the description on how it started misbehaving which I added to the bug description:
Was trying to install chromium, vlc & restricted-ubuntu-extras in my first restart after installing ubuntu 11.04. during installing chromium (which was the first on the list), Ubuntu Software Center stopped responding after downloading about 16MB. I restarted my machine. after which it said that chrome is installed. on installing restricted-ubuntu-extras, this error came.
Now I am not able to install anything using 'Software Update Center'.
The following command would remove the leading astericks, spaces, slashes, tabs and is present in an awk script.
Code:
gsub(/^[/* ]*/,"")
The above code is working fine when i run in Cygwin on windows machine. But when i run in Ubuntum throws the following error.
Code:
awk: ./Format.awk: line 30: regular expression compile failed (bad class -- [], [^] or [)
^[
awk: 30: unexpected character ''
awk: ./Format.awk: line 30: runaway regular expression /,""); ...
I am trying to get vsftpd started on my server. I followed the steps outlined here: [url] but for some reason, the daemon is not starting or throwing an error message.
After making all of the changes to vsftpd.conf, if I execute the following commands, here is the result:
Perty self explanitory, I'm trying to boot up ubunto server edition 10.10 from a USB stick (pen drive) and it works fine until step 3 when it says "Your installation CD-ROM couldn't be mounted. This probably means that the CD-ROM was not put in the drive. If so you can insert it and try again
Try again to mount the CD-ROM? <Yes> <No>"
I don't have an installation cd-rom! I put the .iso file onto a memory stick, inserted it into my old computer (which i will turn into a server later) , restarted it and got past the first two slides and got this error? Do I have to put the iso on a cd-rom?
Are there any programs out there that can be downloaded like word processor or open office so i can use it for school and print from it. I have figured out my internet and sound problem here just throwing out another easy problem that most likely will be solved.
View 4 Replies View RelatedI've written a simple perl code to learn switches in perl.My code is pasted below,
#!/usr/bin/perl
$opt = 1;
switch($opt) {
[code]...
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35
I am facing a problem while installing backtrack 4.0 on my virtual box. After assigning a hard drive and booting from the live cd, i am receiving a error message as follows:
Loading, please wait...
Buffer I/O error on device hdc, logical block 76636
(this statement gets repeated like four times with different logical block id.
SQUASHFS error: squashfs_read_data failed to read block 0x5bb337b9
SQUASHFS error: unable to read is index table.
It is not the first time i install operating systems on virtual box though it is the first time i receive such an error with backtrack.
I'm trying to boot my Fedora 12 partition, but am failing miserably, when I try to boot Fedora 12 I get "ERROR: NOT AN ASSIGNMENT"
my 40_custom file is as follows:
Code:
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
[code]....
Note that I tried this using the entry that is currently commented out and I had the same result. Does anyone know what is wrong? The entry that is currently uncommented came directly from the grub entry created by fedora itself (before I installed ubuntu).
I am trying to use Tiny Core as the OS for a fairly old embedded device using a Pentium 100 with 64MB Ram.
I managed to get the Tiny Core image loaded onto a 128MB CF card. When I turn the box on, it presents me the Grup screen and I can select the bootup option (tinycore). However, soon after I am getting a DMA Timeout Error.
Also in this link: http://www.linuxquestions.org/questi...ble-it-734489/
Now, I am not familiar with Tiny Core all that well, and neither am I sure of how to modify the initramfs to include: hdparm -d0 /dev/hdb.
I've been playing around with trying to assemble a bare-bones Linux system on a disk.img file through a loop device. I compiled the most recent stable kernel and then copied it onto the root partition in the image. When I try to boot up into the image using qemu, grub gives me this:
Code:
Booting 'tiny'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinux
Error 13: Invalid or unsupported executable format
Press any key to continue... I am confused because I compiled the kernel with 'make bzImage', and the architecture hasn't changed (qemu on the same machine used to build the kernel). So it should be bzImage format. Is that what this Error 13 means, or could it means something else is wrong...?
I am novice in linux and I have installed linux ES in my previous window desktop it was working fine. I try to make a bootidisk and system is not booting anymore. Following error I am getting at the booting time.
sda: sda1 sda2 sda3
Loading jbd.0 module
journalled block device driver load
loading ext3.0 module
creating block devices
creating root devices
creating root filesystem
Kjournal strating. commit interval 5 seconds Ext3-fs mounted filesystem with order data mode. pivrootivot_root (/sysroot,/sysroot/initrd)failed: 2 Freeing unused kernel memory:228k freed kernel panic: no init found. try passing init=option to kernel. ##########################################################
Grub version 0.93 (639k lower/ 2594416k upper memory) checking grub append> ro root=LABEL=hda=ide-scsi.
I got an online centos server and it suddenly stopped rebooting. I taught there is some issue with filesystems and I went into centos recovery mode and did filesystem cleanup so I did fsck and e2fsck .
How do I re-mount the disk in centos recovery mode so it boots up normally? I am unable to mount them normally as its giving me some diskless error or am I doing something wrong?
i installed squid 2.6 proxy server on centos 5.4,squid performs services very nice but after reboot the system.it shows a just black screen written with " GRUB_ " and held the boot process,tell me what should i do ?
View 1 Replies View RelatedChanges I've made to the config files:
Connecting with PuTTy works fine with my public/private keys. But why does sshd start and then restart twice when booting? I tried looking in the logfiles under /var/log/ for anything with ssh/sshd but nothing shows up.
Ubuntu Server 9.10
I want to block some ips permanently ie. even I as the root user cannot unblock these ips without having to format the whole system.
So i thought if some blocking software provided passwords for editing rules and I put a 'junk' password there and so that I can't delete the rules without the 'junk' password which I don't know.
So I examined iptables and I saw that it is a kernel module so there is no use of that since I can probably throw it away.
But the basic question is to block ips and gulp the key.
I am in the process of re-DL-ing the ISO as the checksums didn't match.
Mind you, that was with a shell extension in Win-Lose. Who knows.
Anyway:
I have the ISO (that I had previously) on a USB courtesy of UNetBootIn. All appears well until, quite quickly, I receive an error after the loading process which goes something like:
Code:
Error: cannot find disk at [hash-code - looks like 0ace5f etc etc, is about 12 char's in length.]Something very similar (but not same error I think) happened when I tried to do the same with my OpenSolaris or Fedora install. I.e., gets as far as the very beginning of the loader and then: bork.
At least one of them said "will reboot in 120 secs". Saves me the trouble!
I seem to have a complex issue on my hands that i can't figure out. first, i wasn't able to get access to my LVM'd hard drives via SSH without half of the content being missing or locked out (read-only or unable to open at all). the problem then went up to being unable to boot up - all i got was a long slew of [100.1234] ata1.00: error messages (they eventually DO stop once they get to around 998.234234 or whatever, and then i can log in and it seems to be "stable").
Part way through this rebooting ordeal i realized / decided to make power-on-self-test stop and wait if it finds errors (via bios) - that showed me that my 750G SATA drive is "bad" and my two (older) 120G & 250G IDE drives are "ok". i then unplugged the SATA drive, rebooted, and didn't see those error messages. however, my LVM was still obviously not coming together (since LVM was made up of the 120G, 250G, and 750G drives)
So, now it seems:
a) I can't boot smoothly with all drives in place
b) I can't do anything with lvm if i remove the 750G sata
c) With all drives hooked up, i can wait 10mins for the errors to go away, but STILL can't do anything with lvm
d) I need to recover the lvm stuff so that i can nicely migrate ALL those files (1.1TB of it) onto a new 1.5TB drive and do away with lvm
This is all running ubuntu 7.10 server edition (32-bit version on a 64-bit computer). i DID post a question on the ubuntu forum as well but so far got no replies at all.
Here's a few pics of the booting process, with one or two "fail" lines showing.
I am trying to update CentOS 5.6 but its throwing me an missing dependency error.
Code:
Missing Dependency: /usr/bin/rebuild-security-providers is needed by package java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.i386 (installed) I checked /usr/bin and the file "rebuild-security-providers" is present in the folder. So i really don't know why is it throwing an error. I also searched LQ but no relevant results.
I have written a code in which i have used vectors:
vector< vector<double> > arr;
arr.resize(x,vector<double>(x,0));
x is a variable which is taken from a very beg text file > 64MB
first line of my code is
cout<<"
Wait Running...";
my code takes text file as an input, takes its data and generates an output text file....
Code is running fine for small data tried till x= 10
but while trying to run with large data ie x = 5000000 approx it is giving error
Even the first line of the code is not displayed. NOTE: variable is declared global but its size is defined in main.
The error that i am getting after approx 2-3 minutes is:
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc
Wait Running...Aborted (core dumped)
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedI am about to work on getting the workstations on my network here to be connected to the Active Directory on my Windows 2003 server using Likewise Identity Service. of the security requirements is a good time sync, so I am trying to setup my Windows server time server on my CentOS machines. These machines dual boot Windows 7 and CentOS 5.5. I am using the Windows server as a time server and it's getting its time from its CMOS.llowing a microsoft kb article. I removed all the time servers from the CentOS box I am experimenting with and added the IP of my Windows server, it seems to connect ok but theime never gets updated.Oh, and this network has no connection to the internet it's cut off from the world, so sad and lonely and cannot get internet time
View 3 Replies View RelatedI have installed Recoll 1.13.01 on my Ubuntu 10.04 box. I selected certain file directory trees to index and when I build the index using the gui it seems to work fine based on my limited testing. So far, so good.I planned to add a step to my nightly cleanup, backup and other housekeeping script to update the Recoll index. The command in question is recollindex While testing the command line indexing I found that an OLD password protected Windows zip file caused it to throw a bunch of errors. It appeared to continue. I located the offending file and as it was already backed up to DVD media and deleted it. I have also found a couple of other offending files which make me wonder about the robustness of this application.
The next case I had a file Session 12a.odt which for some reason was of 0 bytes - don't know why - perhaps I was just starting to write this document and never put anything in it.
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View Related