I have standalone Suse 10 SP3 that when I run
Code: # hostname webserver but when I run host command
Code: # host webserver;; connection timed out; no servers could be reached I would like to get the IP when I issue
[Code]....
I have 2 different networks :the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping [url]..... on the gateway machine, it works, while it doesn't work on the private network. Note: I am using VmWare 7, CentOS 5.
I could say that the problem in DNS:because when I use this command in the private network machine: [url]...., it says connection timed out; no servers could be reached ,while in the public one, it works properly.....
I have been playing with this for awhile now and I am ready to go postal.
I just want to move some files around and potentially rsync my net book with my desktop as well as learn the software (my primary reason)
Steps Taken.
Set Static IP address to machines on LAN
Turned on Port Forwarding (22)
Added Rule to UFW allow 22/TCP
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
I've been trying to ssh out of my home network to school computers and I keep getting:
ssh: connect to host sage.math.washington.edu port 22: Connection timed out
I've tried this on my machine (running Ubuntu 10.04) and on a windows 7 machine (using putty). I have been successful ssh'ing to this machine using either of the laptops from every other network I've tried, so I'm pretty sure it's something about my home network.
when I am run:
ssh -v "login"@"server"
I get:
OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to server ["address"] port 22.
debug1: connect to address "address" port 22: Connection timed out
ssh: connect to host "server" port 22: Connection timed out
I suppose this is because I am connecting from a public institute where there is a firewall that is blocking an outbound connection on port 22.Is there anyway I can bypass the firewall using the internet ?
I know that wget will give up after 20 failed connection attempts, but is there any way I can escape without waiting?
View 1 Replies View RelatedI have been trying to solve this problem for two days now looking at various forums and websites but can't really figure out what's going on here.I have setup postfix on my ubuntu and I can send emails using "telnet localhost 25" and the ehlo thingy. Apache can also send emails. My problem is with incoming emails. When I try to send an email (through Gmail) I get the following error message:
Code:
Delivery to the following recipient has been delayed:
root@example.com
[code]...
PPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.
View 11 Replies View Relatedi have two PCs A and B, both are connected via LAN PC A Configuration is
IP Address 10.102.6.232
Broadcast Address 10.102.6.255
Subnet Mask 255.255.255.0
Default Route 10.102.6.2
Primary DNS 144.16.192.55
[Code]...
I am trying to connect B from A using command shh -X devendra@144.16.205.236, and facing error like ssh port 22 connection timed out.
Linux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server
The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?
# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf
In a little over my head here but eager to learn. Running Fedora 10 on an IBM T41. Trying to set up a local server so that I can run PHP and test webpages locally (I'm a client-side web designer). Went through the SendDerek tutorial and everything went great until I tried to check the port with canyouseeme.org. I get "Connection timed out" every time.
- The httpd service is started via the terminal.
- Port 80 is unblocked via "Firewall Configuration."
- I set up port forwarding on my router.
What am I missing? I just want to be able to have the local computer run my PHP scripts instead of having to upload them to a remote server every time I make a change.
I have a problem sending emails in the command line. I have introduced this command:
sendEmail -f my.account@gmail.com -t myself@domain.tld
-u this is the test tile -m "this is a test message"
-s smtp.gmail.com
-o tls=yes
-xu usernameonly -xp mypasswd
But then I received this message:
sendEmail[13230]: ERROR => Connection attempt to smtp.gmail.com:25 failed: IO::Socket::INET: connect: Connection timed out
I am not able to connect to remote server through secureCRT . my local team has said that server is working fine . but I am not able to connect it remotely . what more i can do to connect it to server
View 10 Replies View RelatedI am trying to copy the file on remote server, but I am getting error " ssh: connect to host 172.28.21.14 port 22: Connection timed outlost connection "My two server are bastion10 and newlink, I want to copy file from newlink to bastion10 buet unable. I am able to ping, when i run " lsof -i :22 " command on link3new server I am getting
link3-new:lsof -i :22
sshd 6992 root 4u IPv6 11878 TCP *:ssh (LISTEN)
while on bation10 it is ( ESTABLISHED ) ..
Issue with the 'host' command that comes with bind-utils package.We don't have any browsing/name resolution issues except to the following two sites:
[code]....
command [URL] returned:
www.aeroplan.com is an alias for www.halb.aeroplan.com.
www.halb.aeroplan.com has address 207.34.195.17
;; connection timed out; no servers could be reached
;; connection timed out; no servers could be reached
[code].....
I have tried to run the "host" command against different DNS caching servers I have access to all produced the same timed out error. I called Aeroplan technical support to report the issue to them and from their perspective, they have no problem accessing the website.And we don't have any problem accessing any websites ourselves if "host" return A record lookup without the timed out error.
1. It's not our firewall filtering out packet. I tried it on external facing server without firewall and got the same result.
2. It's not our DNS caching server cause same errors are observed on our ISP caching server.
3. It works on an altogether network, from a Windows Vista desktop, through IE 8.
We got a new server with 2 network interface cards with 4 MAC addresses in total. We would like to run two virtual machines (vserver1 and vserver2); one should connect via eth1, the other via eth2, and the host (mainserver) via eth0. The content of /etc/network/interfaces is as follows:
[Code]....
A connection from mainserver to vserver1 or vserver2 is not possible; a ssh connection from mainserver to vserverx ends with a login to mainserver.
I can reach the internet just fine with OpenSuSE but when i try to dig mx gmail.com
;<<>> DiG 9.7.3-P3 <<>> mx gmail.com
;; global options: +cmd
;; connection timed out; no servers could be reached
I don't know what to do, YaST always seems like it'll time out but eventually it reaches the internet. Can anyone give me some diagnostic commands to see what is slowing down the network on the server I'm running?
I can't connect to imap or smtp ports remotely.
Edit: I left out one thing, this is a mail server and a web server. Both are not currently being used as this is a fresh install of OpenSuSE
All other devices work fine with dig. Its just the server.
My server is installed on a guest OS on vmware. It really bugs me because I can't access it from the host OS's browser even though there is no discrepancy between /etc/hosts, /etc/sysconfig/network, httpd.conf files. Issuing ifconfig command also returns the same IP. I have also enabled netwroking in the vmware settings. And I can ping the guest OS's IP from the host.
View 3 Replies View RelatedI've installed Ubuntu Server 9.10 on a small VIA C7 pc. Every now and then (it can take days or hours) the server goes to sleep. It can't be reached by network. If I hit the keyboard it comes to life within a second.I've looked in the bios and I cannot find any option that would prevent this. I used to run Debian Lenny on the same machine and never experienced the problem.
View 6 Replies View RelatedI have set up my guest OS in VirtualBox so that it has a static ip and is using a bridged adapter. As a result, I can see the webserver that's hosted in guest from my host OS's web browser. However, for some reason my current setup does not allow my guest to reach the internet. What settings do I need to enable both?
View 1 Replies View RelatedI have SSH running on port 8662 and 22. I use 8662 for the outside world (eth0 which is 192.168 network) Here are the only lines I have changed in sshd_config:
Port 22
Port 8662
#Protocol 2,1
[code]....
BTW, ports forwarded on my firewall, checked and triple checked it.
I am building 1 system includes 1 firewall server using iptables 1 Webserver && 1 FTP server. On FTP server IP: 192.168.1.2 - GW: 192.168.1.1, I installed ProFTPD successfully. In LAN I do everything successful.
On Firewall server <IP PUBLIC> on eth0 && IP LAN eth1: 192.168.1.1
Iptables rules:
Code: # Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*nat
:PREROUTING ACCEPT [950:126970]
:POSTROUTING ACCEPT [89:5880]
:OUTPUT ACCEPT [19:1342]
-A PREROUTING -d <IP PUBLIC> -i eth0 -p tcp -m tcp --dport 21 -j DNAT --to-destination 192.168.1.2:21
-A POSTROUTING -s 192.168.1.2 -o eth0 -j SNAT --to-source <IP PUBLIC>
COMMIT
# Completed on Sun Mar 7 21:01:16 2010
# Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*filter
:INPUT DROP [1599:157409]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [232:34452]
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A FORWARD -i eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o eth1 -j ACCEPT
COMMIT
# Completed on Sun Mar 7 21:01:16 2010 In FTP server i access to internet good.
I check port 21 on IP PUBLIC , it's return Open.
But when I using ftp command then it's show Code: Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
Aborting any active data connections...
ftp> bye
C:Documents and SettingsLONGVNIT>ftp <IP PUBLIC>
Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp>
when I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
I am not so experienced with networking in Linux. I've successfully installed Red Hat Linux Enterprise 5.2 on a VMware host. When I issued nslookup command, it returns "connection timed out" error as follows:
Code:
[root@rac1 ~]# time nslookup rac1
;; connection timed out; no servers could be reached
real 0m15.038s
user 0m0.000s
sys 0m0.000s
My questions are:
(1) Is that error normal?
(2) Is there a way to decrease the 15.038s value? rac1 is the local hostname, so why it takes all that time to resolve it.
Following info may help:
Code:
[root@rac1 ~]# hostname
rac1.mydomain.com
[root@rac1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#eth0 - PUBLIC
192.0.2.100 rac1.mydomain.com rac1
[root@rac1 ~]# ping -c 4 rac1
PING rac1.mydomain.com (192.0.2.100) 56(84) bytes of data.
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=1 ttl=64 time=0.015 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=3 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=4 ttl=64 time=0.029 ms
--- rac1.mydomain.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.015/0.025/0.029/0.007 ms
I can't fetchmail form my company server to local PC. It gives error
fetchmail: WARNING: Running as root is discouraged.
fetchmail: starting fetchmail 6.3.6 daemon
fetchmail: connection to 202.137.236.11op3 [202.137.236.11/110] failed: Connection timed out.
fetchmail: POP3 connection to 202.137.236.11 failed: Connection timed out
fetchmail: Query status=2 (SOCKET)
fetchmail: connection to gmail.comop3 [74.125.236.56/110] failed: Connection timed out.
I am trying to connect but it can't.
I ma facing mount problem with error connection timed out between linux and solaris machine.
when i run mount command
root@rose> mount 10.142.201.104:/view/itb_configuration_712/vobs/ims_it /view/itb_configuration_712/vobs/ims_it/
[code]...
I am relatively new to Ubuntu. Currently running Lucid Lynx, but I cannot connect to the internet. I can ping 127.0.0.1, and google.com. Software update works as well, but the connection times out when I try connecting to a web site e.g. bbc.uk.
View 4 Replies View RelatedIn our development box we are configured postgresql to work with Jboss. The thing is we have firewall iptables in our linux box. when the iptables is stopped we can connect the postgres db locally using -h option, also we can connect thru a weblink we have created using Jboss. But when the iptables is started we can't connect the db locally using the -h option and the web is giving the below error. Caused by:
org.postgresql.util.PSQLException: Connection refused. Check that the hostname and port are correct and that the postmaster is accepting TCP/IP connections.
at org.postgresql.core.v3.ConnectionFactoryImpl.openC
[code]....
I am having alot of trouble setting up evolution to work with gmail. I am using pop for recieving mail and it's slow but still works. When I try to send mail with smtp.gmail.com I get the error message that the connection timed out. How can I set this up to send and recieve email?
View 6 Replies View Related