I have installed ubuntu 11.04 on my laptop.But whenever I keep the cursor on any desktop icon like folder or tabs of some windows it fails to detect the icon and hence i am not able to click it.The minimize maximize buttons are also not recognised and I have to use keyboard shortcut.Is there anything wrong with the system itself?Its a slightly old one having p4 processor and 1 gb ram.
View 3 Replies
Ubuntu wont detect my screen (mag bf22) correctly..that causes poor resolution (1152*864 max) my screen is able to at least a 1600*1200 resolution (witch i use in my windows boot ) is there anything i can do in order to fix or increase the resolution ?.. i have already installed the drivers correctly
asus p7p55d
intel core i5 750
nvidia geforce 9500gt
wd640GB black caviar
Im running netbook remix on a eeepc 1005ha. It is my only OS and Im loving it except for one obnoxious quirk. It randomly cuts text and randomly pastes it. If there is something in the clipboard, it will usually paste that, but just as often it will cut random text and paste that. The pastes occur when the cursor focus jumps back to the location of the cursor on the screen. I dont know a better way to phrase that, but thats what it is doing. Say... I put the cursor over the word "pastes" in the paragraph above... even though Im typing in this paragraph, the focus will "jump" to the cursors physical locale (the word "pastes") and then paste whatever is in the clipboard. If the cursor is outside of the textbox, the page will jump to the bottom.
This behavior occurs across programs and in any place text can be entered. I can find no rhyme or reason for it... it just... happens. Sometimes even when Im away from my computer, so its not like Im hitting some key on accident. I have loved everything about this ubuntu distro, but this issue is just toany obnoxious. Writing psych papers on this thing is going to be near impossible if I dont get this fixed before I go back to school.
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
If you set your mouse for double click is it possible to change cursor style for hover icons?Currently the cursor looks like it is going to do single click:This does not make sense. It should show regular cursorAnd another misbehavior for double click occurs in Power Applet.Sleep and Hibernate icons require single click, but Settings icon requires double click:
View 3 Replies View RelatedI just got offshore and was trying to extract csv files with new software and the toughbook went crazy. When i try to boot it up it ends up with the black screen and flashing white x in the middle of the screen.Luckily the company have a back up to do the job but would like to try to resolve it on the rig rather than send it back to Germany
View 1 Replies View RelatedI have a problem in gnome desktop.i have started getting a black screen with a X cursor in my centos.see the preview:[URL]
View 3 Replies View RelatedI have installed recently a bunch of distros and settled with xubuntu 11.04 for my old laptop. Everything worked fine out of the box except some times wireless stopped working and the pc needed a restart. One of those times i restarted and because restart seemed unresponsive I clicked again but a problem tab poped up. Every time that i clicked restart, the pop up appeard I was forced to force shutdown.
1. Maximize/Minimize/Close buttons are completly missing. Even windows settings (where you can unjust those buttons) does not work. It is blank.
2. Cursor is invisible but when i click something appears , stays visible but the cursor is a different icon than before.
3. other problems as well. I cannot move terminal etc.
how can i turn off the automatic playback of audio songs when cursor is on there icons?
View 3 Replies View RelatedI have a problem with booting from a USB flash drive. I have Acer TimelineX 3820TG. I have Windows 7 Home from Acer and I installed Mandriva OS from USB(from USB because this Acer doen't have a DVD drive). It was OK, but I want reinstall Windows 7 and so I did. Now I have Windows 7 Professional and it wrote over Mandriva's GRUB. It wasn't a big problem. For a while I was just using Windows 7 but now I am thinking that I need some OS with Linux and I am thinking about Ubuntu. But when I tried to boot from USB with Ubuntu I get a black screen with a blinking cursor after the BIOS POST.
I was trying many applications to create a bootable USB drive and many versions of Ubuntu (and other Linux distributions), but nothing worked. I tried to Google for answers but I found many problems where all booting goes to black screen but in my problem Windows 7 boots fine from disc but from USB doesn't work.
Redhat Ent Linux ES Release 2 (Taroon 8)
Kernel 2.4.21-4.ELsmp
startx(1): initialize X session - Linux man page
I thought I'd look into methods of recovering from a lost password for future use, how to change the passwd and shadow should I need to. So I started an X session, vi'd my .swp files then logged off. Perhaps I changed one of these files accidentally, but my intent was just to view them which I did. After starting up my computer the next day and logging in I began an X session - "startx". The session appears to have started, but with a black screen and an active mouse cursor.
I am using ubuntu 10.04 on a desktop PC. I have connected my 17" Dell LCD monitor with webcam (using the monitor's USB cable).
Ubuntu does not detect the webcam at all (I tried Skype and Cheese, both say no device found). (The monitor webcam works fine in Windows).
How do I make the webcam work?
It is bit unconvenient to see the mouse cursor while watching a movie. Is there some sort of removal of it?
here is my config:
Code:
.mplayer$ cat config
# Write your default config options here!
zoom=1
fontconfig = "1"
font = "dejavu sans"
[Code]...
I am trying to boot up Linux Mint 7 after a packages upgrade and it boots up but then it shows this and stalls.And similar messages for GDM and then it just shows a black screen with a single blinking cursor on the middle left of the screen. I cannot do anything except press the CTR-ALT-DEL combination to re-boot, then it shows the usual shutting down messages and does the re-boot.I am running the 2.6.28-19 kernel and I have upgraded the Ubuntu packages on my Linux Mint 7 system from Jaunty to Karmic. Please help as I do not want to re-install. I am running Knoppix 6.3 ATM and I should be able to chroot from that if necessary. I am booting from /sda1 that has Linux Mint 8 installed and grub 1.97.
View 1 Replies View RelatedI'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies View RelatedPrior to upgrading to Ubuntu 1.10 yesterday, Skype worked fine. Post upgrading, skype able to locate webcam but unable to detect mic (Logitech webcam and mic) and when hovering over skype icons the text is blank. I have removed skype and reinstalled via Ubuntu Software Centre as well as installing Quantus Plus from Synaptic Package Manager to no avail. I have tried using Google Video but video quality is poor. My knowledge on programming code is non-existent.
View 3 Replies View RelatedRecently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies View RelatedWhile installing my redhat distro in VMware 6, its giving an error message that ethernet will be disconnected.
View 1 Replies View RelatedI have Backtrack4r2, and it did not detect my wireless card which is Intelpro 2200. I installed Windows wireless driver, after i installed the regular driver using wine, but it did not work.
module is not detected by linux No wireless extension. how can I install rhe driver where the card is not detected.
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
i am trying to create an image of Slackware OS but vmware is not able to detect the disk. it gives me below error, "Unable to detect disks or volumes on the source machine. Make sure that the source is a supported linux distribution." can some one tell me what do i need to do to create the image.
View 2 Replies View RelatedI recently installed virtual box on debian and after it had finished my terminal informed me that I could remove some "unnecessary" software by use of sudo apt-get autoremove. When I did this, some of the icons on the desktop changed and all of the icons in the drop down menu on the bar at the top of the screen also changed to ordinary folder symbols. The theme that I was using also went away. I restarted the computer and it booted back into a shell prompt with no GUI. I tried to get back to the GUI using alt+f7 but it didn't seem to exist
View 2 Replies View RelatedI turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedI was using irssi in screen but lost connection. After I ssh'd back in to the server, I can no longer attach to that screen. screen -ls shows that the screen is already attached. I tried screen -D to force detach it, and it said detach but screen -ls still says it's attached. I tried screen -x and it just hangs there.
[sub@server ~]$ screen -ls
There are screens on:
4033.poe (Detached)
7728.irssi (Attached)
2 Sockets in /var/run/screen/S-sub.What can I do now?
I booted up to Fedora today (kernel 2.6.29.5-191.fc11.x86_64) and found that after logging in, my cursor was in the bottom right hand part of the monitor. When I moved the mouse the cursor moved in the right direction but then immediately returned to the bottom right of the screen. When I click the mouse I get the options I would expect to have if the mouse was in the corner and the keyboard also works fine. So right now I can't do anything that requires a mouse since the cursor doesn't like leaving the corner of the screen. I can't even get the updates installed (hoping they might resolve they issue somehow) since I can't click anything.
The only thing that I did before this happened was installed a whole mess of updates and installed nvidia drivers.
I decided to give a try to VNC server on my remote dedicated centos machine. WHAT I DID:
yum groupinstall "X window system"
yum groupinstall "GNOME Desktop Environment"
yum install vnc-server
Followed the Centos wiki tutorial.
PROBLEM: After typing the password in my vnc viewer I get a black screen with cursor. I can move the cursor about but thats it.
SOLUTION: I have googled like crazy for the last 2 days but have not found a solution yet. My best guess is xorg.conf file, but I am quite new to linux so could be wrong.
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code:
Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
When I try to start Fedora 12 all I get is a flashing cursor on thep LHS of my screen.This is new. Fedora 12 workd fine up until yesterday.treat me as a novice and if you start using technical terms I will just be lost
View 1 Replies View RelatedI am using fedora 15 on my dell studio 1558 . Sometimes a black screen appears with a cursor blinking when i tries to reduce the brightness of the laptop and somethimes it automatically happens . And i am not able to do anything its just like the blue screen of death as in windows . the only way to get back is by restarting the computer
View 8 Replies View RelatedSeems to happen with every version! I have the same problem as my last thread. Basically it was solved by removing an IPv6 line from the hosts file or adjusting the vnc configuration to use an IP and not host name. Both of these are not working for me on 11.3. I'm not seeing any errors in log/messages. It just sits there with an X cursor that moves around then times out after around a minute or so. I don't know if there are any other logs that will help.
To clarify, starting a vncserver from a terminal will work, but the 'Remote administration' vnc with the login screen will produce a fully black screen with an X cursor that updates with my mouse position.
