General :: Slackware 10 Will Not Let Me Create Partitions
Oct 27, 2010
OK, trying to install Slackware version 10 on the Athlon XP Shuttle PC and been hit back hard at the very first hurdle.In short I can't create a partition in Linux.At all!CD boots up OK. Loading in basic kernal.I try and create a partition using either fdisk or cfdisk.BOTH apps reports that the partition table cannot be written to! Both apps run read only mode.So I am unable to create any partitions in Linux.
I booted up a Windows 98 floppy and checked the partition table.Two x30GB partitions.I deleted both of them in case Linux did not like a Fat32 DOS/XP partition table.Tried again. Same read only messages.Attempt to use 'w' in fdisk reports the partition table cannot be written to.Viewing the partion table returns nothing, no matter how I set it up in DOS/Windows.
Only clue is that to my surprise, the DVD RW drive is the Primary master and the 60GB HD is the secondary master. I must have slipped up installing the drives years ago and Windows didn't care. Would Linux? Other than that, nothing in the BIOS that gives a clue. I turned off ACPI support in case. I also tried the ACPI kernal. No joy there either. But DOS/Windows quite happy to build partitions.Cfdisk states that no partition tables exist even after Windows has just created one.So I am at a loss.Any clues? This is a Shuttle PC so the tech is a bit propritory but nothing that various renderings of Windows have not handled.
View 6 Replies
ADVERTISEMENT
Feb 17, 2011
I've reached a point in my Slackware journey where I feel confident enough to remove my Mint 10 linux. It used to be my 'go to distro' when I trashed my Slackware installation. Now, I have Slax on a USB and I think that is enough.Mint 10 occupies /dev/sda5 (root) and /dev/sda6 (home) while Slackware occupies /dev/sda7 (root) and /dev/sda8 (home).If I delete the /dev/sda5 & /dev/sda6 partitions, can I very safely resize /dev/sda7 and /dev/sda8 to use the space freed up?
View 14 Replies
View Related
Mar 15, 2011
i have server and there is no option from my control panel on data center to make os reload with partitions i need for Openvz , so how can create partitions ? the server have 2 hard.
View 5 Replies
View Related
Mar 19, 2010
How to automatically create windows partitions(fat/ntfs) through Linux. I have all the required information for partitions to be created.
For example:
Size
Flag
Partition Type
etc.
View 2 Replies
View Related
Aug 3, 2011
How do I divide my hard drive into multiple OS'es/partitions for my test machine? For example:
Win XP
Win 7
Gentoo
Ubuntu
Storage
Can Linux'es share swap area? I was told to leave the first primary for the grub and linux cores.
View 1 Replies
View Related
Jan 14, 2010
I have run into a Gparted problem that I am not familiar with. I've never seen it before.
I cannot create logical partitions without errors or not at all. I have two choices:
1) not checking 'round to cylinders' - I will get an error* and it will not partition
2) check 'round to cylinders' - it will partition but I will also obtain 4MB of unallocated space (each time)
This applies to Primary partitions, too, I think. At least, #2 will happen.
Imho, this is ridiculous. Why would I retain 4MB of unallocated space? In other words, the two choices above are not choices.
The error message doesn't explain much if anything either. *"Unable to satisfy all constraints on the partition"
View 9 Replies
View Related
Sep 26, 2010
I want to create a boot cd that will mount some partitions, copy a file, run lilo, then eject the cd and reboot the computer.
View 1 Replies
View Related
Aug 7, 2009
I have three hard drives in my computer That I want to make RAID 0. All of them already have partitions and data on them. What I want to know is if I can, without losing data, add the disks to RAID and then merge the partitions? All the partitions are of the same type. Or would it easier/better/possible to do this with LVM? Even if I'd have to shrink partitions and copy data to a new LVM one to get it set up properly, would it be better than RAID 0?
View 2 Replies
View Related
Sep 28, 2010
I want to create a separate partition for /home.inuxMint is *already* installed.PartedMagic be used for the same, NOW
View 14 Replies
View Related
Jul 19, 2010
I would like to remove/create partitions on a harddrive without going into the menu of fdisk.
can one pass options to fdisk to create and delete without going into the menu? So that I can write a script to do that automatically.
Or if fdisk isn't capable, what other alternatives do I have?
View 5 Replies
View Related
Nov 20, 2010
My partition layout is as follows:
sda1: 14GB / ext4
sda2: 10GB /iso ext4
sda3: 4GB /home ext4
sda4: 86GB Extended
sad5: 2GB swap
I have 84GB free space on this hard drive and want to install another distro. Will I be able to create another / and /home partitions for the new distro?
View 6 Replies
View Related
Aug 17, 2010
I use slackware 13.1 and I want to create a RAID level 5 with 3 disks. Should I use entire device or a partition? What the advantages and disadvantages of each case? If a use the entire device, should I create any partition on it or leave all space as free?
View 4 Replies
View Related
Jul 1, 2010
I will install Slackware 13.1 on my desktop in 50 GB of disk space but I'm not sure about the proper size for the partitions "/" and "/ usr / local". I want to use most of the space for "/ home" partition, so I can keep my data when I upgrade to a newer version (right?)
View 4 Replies
View Related
May 30, 2010
I'm trying to install Fedora 13 on the HDD of a notebook, currently used by Windows XP. I have several partitions used but have also about 18 GB of free space.If i try the "use free space" option to install Fedora i immediately get an error:
Quote:
Could not allocate requested partitions:
not enough free space on disk
So I have to create the partitions manually. My disk partitioning is that you can see in the image:For first i try to create a /boot partition (ext3, 250 MB). This operation is completed successfully. But from here any operation i try to create other partitions returns an error like the previous ("...not enough free space on disks")I have over 17 GB of free space, as you can see.Maybe my disk partitioning is somehow strange and the partitioning tool can't handle it properly.
View 2 Replies
View Related
Nov 22, 2010
I'm trying to install Zorin OS to my computer, but I can't create a partition on my HD to get it to work. This is my first attempt at having multiple OSs on my computer, and my first delve into anything Linux, so I'm sorry in advance. My problem is that my computer (running Windows 7) already has 4 partitions, so creating another for Zorin won't work. I'm attaching a screenshot so you guys can see the partitions I have at the moment.I really hope to figure this out tonight so I can start to explore the OS asap!
View 2 Replies
View Related
Mar 13, 2010
I can't create any formatted partitions in my hdd (/dev/sda) with Gparted or KDE Partition Manager.
With either I can only create an unformatted partition. When trying to reformat it, I get this: [URL]
Quote:
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
So the problem is apprarently at kernel level. After that the partition will of course just be shown as "Unknown" - even after a reboot. What kinda app could possibly reserve my partition table?
View 3 Replies
View Related
Dec 1, 2010
I'm trying to install Crunchbang on a partition I made. I managed to resize my Ubuntu for space to install Crunchbang (which essentially is another Linux OS).I currently have Ubuntu 10.10 and Win7 currently installed. The error I get in GParted is the one above in the title. I know there is a way to install a third OS but this problem is killing me. I need some to help my step-by-step. I'm not that bright when comes to technical terms and writing stuff in the terminal. My current filing system:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 3 Replies
View Related
Mar 4, 2011
i am trying to create an image of Slackware OS but vmware is not able to detect the disk. it gives me below error, "Unable to detect disks or volumes on the source machine. Make sure that the source is a supported linux distribution." can some one tell me what do i need to do to create the image.
View 2 Replies
View Related
May 31, 2010
Say I have this computer and this computer has a 1TB hard disk. I install Fedora 13 on this disk and let the installer do as it wishes with this 1TB of space. I'm going to end up with the LVM thingy. (Can you tell yet that I know nothing about LVM?). Can I, at a later date, use some of the available space to create another partition to install another OS on. Can I create multiple partitions to install several other OS's on?
View 7 Replies
View Related
May 11, 2010
Why when I create ext partitions it reserves 10% of hard capacity?
View 1 Replies
View Related
Jul 17, 2010
After reading Markus Ewald blogpost on http:[url]...n-ssd-on-linux about Aligning an SSD on Linux I decided to give it a try.I have bought two 80 GB Intel X25-M SSD for my home server. The plan is to install Ubuntu 10.04 64-bit server and use the SSDs as system discs and vmware data storage using software raid for redundancy.After reading the blog post I am not sure how to make all my partitions aligned and set up on EBS (Erase Boundary Size)I am planning for four partitions:Boot, size 1GB
Root, size 25GB
Swap, size 4GB
Data storage for vmware server, size 40GB
According to Markus Ewald I should use 32 heads and 32 sectors.Using the live CD, I started using fdisk -S 32 -H 32 /dev/sda.Fdisk can create partitions using cylinders or sectors, and now I ran into trouble.
First partition /boot must start on cylinder 2 (or sector 1024). Size is 1 GB and the following partition should be aligned and start on a new EBS block. How do I do this with fdisk?Should the next partition start on a new cylinder? Otherwise, after formatting, fdisk gives a warning that the partition is not aligned to the cylinder size? The overall question is how to format four aligned partitions which all are aligned with Intels X25-M EBS. EBS for Intel X25-M is either 128KB or 512KB (Have not found a confirmed value yet)
View 1 Replies
View Related
Feb 22, 2011
I would like to install Ubuntu in a separate partition. I currently have Windows XP on the C drive.
I have the following config on my Presario Laptop:
60gb SATA hard drive
41.6gb available
3% fragmented
I would like to partition the hard drive to install Ubuntu as a dual boot. how I need to do this or point me in the right direction? I did begin an install from a cd I burned from ISO. I started by just going for the auto installation and what it recommended. However, when I tried to install, I got an error message that changes were uable to be written to disk and had to abort??
Assuming I can get past the error I would like to know how to create the partitions for root, home and swap and how much space for each.
View 2 Replies
View Related
Feb 27, 2009
I am using a live-cd version of linux and want to install it to my hard-drive but when i try to unmount it and go into qtparted, it says it is still busy so i cant perform changes. This is my result when i type "mount"
Code:
aufs on / type aufs (rw)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
[code]....
View 3 Replies
View Related
Apr 12, 2010
anyone have a script they'd be willing to share that auto detects and wipes all partitions off a drive and recreates a new one and then does a mkfs on it?
View 1 Replies
View Related
Aug 7, 2011
Two nights ago I installed the KDE Spin of F15 and it all went smoothly. Then, I decided to try and use Windows' bootloader (it was a dual-boot) instead of GRUB. So I booted into Windows, spun up EasyBCD, added the correct entry for Fedora, and overwrote the MBR. I rebooted and tried to boot into Fedora, only to realize that the Windows Boot Manager had a failsafe that sensed when it didn't boot into Windows, and it stopped me from booting into Fedora.
At first, I booted into my live USB and tried to get GRUB back. After a couple Konsoles full of GRUB telling me that it couldn't mount the drive and install itself, I decided I was probably doing something wrong and it would be much easier to just reinstall Fedora.
I deleted the Fedora partitions I had made earlier from Windows (because it was already running). Then I booted into my live USB and tried to install Fedora. I clicked "OK" to make a partition (that would mount at /boot) that was 500 mb. It told me there wasn't enough space, but sitting right next to one of the already installed partitions was more than 190000 mb of space. So I tried to redo the partition with 250 mb, then I tried to make the swap partition and the main one (that would mount at /). I kept getting the error. I decided maybe it was a problem with the USB, so I rebooted into Windows and reinstalled the ISO onto the USB (with unetbootin) and repeated the process, only to get the same error.
P.S- I tried to use the option to "Use Free Space" as well as doing it manually and got the same error. Also, I saw another thread where a person with my same type of compute (a Lenovo Y560) had a similar problem. It might be possible there's a hidden partition for Lenovo's purposes? Anyways, the other user's solution was to move the an extended partition somewhere. I'll be posting an fdisk soon, in case I have the same problem as the other user. The other user used GParted, but it looks like I can use Easeus too, which I already have installed.
P.P.S- Here's the fdisk in case it will help:
Code:
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
View 4 Replies
View Related
May 18, 2010
I'm trying to configure autoyast to create three primary partitions:
/dev/sda1 (/boot)
/dev/sda2 (swap)
/dev/sda3 (/)
This is the XML I've come up with:
HTML Code:
<partitioning config:type="list">
<drive>
<use>all</use>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list">
[Code]....
I seem to be missing an instruction or misunderstand something here.
View 5 Replies
View Related
Mar 2, 2011
Is there a limit to the number of partitions/logical volumes you can create using the partman-auto recipes? If not, any thoughts on why my preseed using the values included below results in only a /boot partition and logical volumes root, swap, and user? Is there another way to achieve putting /, /tmp, /var, /usr, /usr_local /opt, etc on their own logical volumes with preseeding?
View 1 Replies
View Related
Jun 12, 2010
I have a new acer aspire one netbook I intend to dual boot. It came with xp installed on sda1. When repartitioning with gparted off a usb stick I noted two existing partitions, one small one for acer stuff and the second for xp.
I shrank the xp partion and created two new linux primary partitions. This gives me sda's 1-4 in gparted but once booted off a usb stick into the slackware install only sda and sda1 are created in /dev.
View 12 Replies
View Related
Nov 4, 2010
When I log into gnome all my other partitions are automatically mounted under /media, but when I log into kde, they are not. I would rather that they not be automatically mounted. How do I change this?
View 5 Replies
View Related
Apr 22, 2011
Slackware 13.0 32-bit is installed on /dev/sda5 with lilo written to that partition. Everything works and I have a nice lilo boot menu (for a WinXP bootable partion). Recently I installed Slack 13.0 64-bit on /dev/sdb5. This also succeeded (apparently). After reboot I was presented with my old boot menu, selected the 32-bit Linux option (/dev/sda5) and after login went to /etc/lilo.conf where I entered a boot stanza for /dev/sdb5 (64-bit linux), and then ran /sbin/lilo. No errors flagged. After reboot there was a 64-bit entry in the boot menu, but when selected it led to kernel panic. Further although I can mount /dev/sdb5 from the 32-bit partition there is nothing in it except lost+found.
So the current position is that I can't access my 64-bit linux partition (/dev/sdb5) to change anything in it (even boot: root=/dev/sdb5 at the boot prompt doesn't seem to work).how do I obtain access to /dev/sdb5? Second question is what items do I need in the 32-bit lilo.conf boot stanza so as to be able to boot to that 64 linux partition?
PS: OK I noticed one warning when I ran lilo.....
bash-3.1# lilo
Warning: LBA32 addressing assumed
Added Slack *
Added Slack64
[code]....
Maybe the problem is with the 32-bit addressing? How do I get lilo to use LBA32 for the 32-bit partition (/dev/sda5) and LBA64 addressing for the 64-bit partition (/dev/sdb5)?
View 5 Replies
View Related
