General :: Directories That Often Stored On Their Own Partitions?

Jun 14, 2011

What directories are often stored on their own partitions?

View 2 Replies


ADVERTISEMENT

General :: What Kinds Of Files Are Stored In The Directories

Mar 12, 2010

3.State what kinds of files are stored in the following directories. Give any ONE file that can be found in these directories.

a. /etc/
b. /proc/
c. /sbin/

View 2 Replies View Related

General ::anything Special About Home Directory Before Users' Home Directories Are Stored There

Jun 19, 2010

Is there anything special about a home directory before users' home directories are stored there, or is just as typical as any other "empty" folder?Let me just cut to the chase, but please no ear ringing about the folly of messing around as root, particularly with directories at root level. I know it's considered stupidity, but I deleted my home directory.

Is there an easy way to restore a working home directory? I tried copying /etc/skel under root, but I'm not sure what a home directory should look like once it has been restored. Besides . & .., there were .screenrc & .xsession in my home directory when I copied /etc/skel. Are these files suppose to be in "/home" or "/home/~" or both?

View 10 Replies View Related

General :: Create Separate Partitions For Directories AFTER Installing?

Sep 28, 2010

I want to create a separate partition for /home.inuxMint is *already* installed.PartedMagic be used for the same, NOW

View 14 Replies View Related

Ubuntu :: Creation Date For Directories Isn't Stored Or At Least Couldn't Find It?

Feb 19, 2010

i'm trying to make a script that gives one output if a directory in /home is older than one month, and another if the directory is less than one month old. I looked around and saw that the creation date for directories isn't stored, or at least i couldn't find it? How is this possible to do then?

View 2 Replies View Related

Ubuntu Installation :: System Directories On Separate Partitions - Redo All From Scratch

Feb 23, 2010

I have a netbook with limited storage. 8GB internal and a 16GB SD card. Right now I have Ubuntu installed on the 8GB internal storage with a few directories mounted on the 16GB SD card. (/usr and /usr/local). This has worked out fairly well for me as having the entire installation on just the 8GB drive was too limiting. When I tried this I didn't know how big to make the partitions I was mounting in. These partitions are 7.06GB for the root (on internal storage) 2.8GB for /usr/local and another 2.8GB for /usr (both 2.8GB partitions are on the 16GB SD with the extra space being media storage for me). It seems I didn't make these partitions big enough because I can no longer perform updates. I'd like to redo all of this from scratch. how would you recommend I partition this next time around? Do I need individual partitions for the separate mount points that aren't root? Are those the directories I should be mounting on the SD card?

View 1 Replies View Related

Fedora :: Where Are Stored PWs For Remote Desktop Viewer Stored?

Oct 20, 2010

I have machine that I used to VNC to on my network with Remote Desktop Viewer from my Fedora 12. When I first connected I checked the checkbox that I wanted to store the pw. Now the pw on the other machine has changed but Remote Desktop Viewer does not ask for a new password, it just gives me a black screen, like I am connected but I can't see anything. I'd like to know if anyone knows where this pw data is stored on the system so I can start fresh. I already tried uninstalling Remote Desktop Viewer and installing it again.

View 1 Replies View Related

General :: Create A Backup Directory And 3 Directories Within That And Some Files Within The 3 Directories And Then Back Them Up Ot Restore Them?

Dec 19, 2009

i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.

View 14 Replies View Related

General :: Multiple Users To Create Directories Over SFTP So The New Directories Keep The Same Permissions?

May 15, 2011

I want to make a webserver with multiple users allowed to login through SFTP to a specific folder, www.Multiple users are added, lets say user1 and user2, and all of them belonging to the www-data group. The www directory has an owner www-data and a group www-data.

I have used chmod -R 775 on the www folder, but after I try to create a folder test through my SFTP server (using Filezilla) the group of the directory created has only r and x permissions, and I am not able to log in with the second user user2 and create a directory within www/test due to a lack of w permission to the group.

I also tried using chmod 2775 on www directory, but without luck. Can somebody explain to me, how can I make it so that a newly created directory inherits the root directory group permissions?

View 2 Replies View Related

General :: How To Store Files / Directories In Different Different Directories?

Mar 23, 2011

I am writing a script, in that my requirement is, if all the fill types stored in one directory from that we need to separate different different directories based on the file types.

for example in a directory(anish). 5 different types files
1- directory
2- .txt files
2- .sh files

like that and my requirement is the (1- directory is moved to one new directory(dir) which we are given in the script)and (2 .txt files are moved to another new directory(test) which we are given in the script)and ( 2 .sh files are moved to another new directory(bash) which we are given in the scrip)finally the directory anish should be empty..using bash script.how it is possible !!

View 7 Replies View Related

General :: Where All Programs Are Stored

Aug 18, 2011

Where is a typical Linux program installed Where does a program install on linux?

In Windows it's clear - Program files - all programs are there. But where are programs in linux stored?

View 1 Replies View Related

General :: Where Is The Journal Stored In Harddisk

Nov 25, 2010

I was reading through the link on journaling-filesystems and i would like to know where exactly is the journal stored in my Harddisk.

View 1 Replies View Related

General :: Where Are All The Emails Stored In Postfix?

Apr 28, 2011

I've installed Postfix MTA in Xubuntu. Where are all the emails stored in my Postfix server?

View 2 Replies View Related

General :: Where Are Kooka Settings Stored

Feb 24, 2010

where the Kooka settings file(s) are stored? I screwed up the appearance of my Kooka window, and have been unable to revert, so I would like to delete the Kooka settings file in hopes of starting over. (I tried uninstalling Kooka, but it didn't help--the settings weren't deleted.) I only know it's somewhere in my home folder, because I opened Kooka in another user account, and found the default settings there.

View 5 Replies View Related

General :: Where Kernel Logs Are Stored

May 6, 2010

where kernel logs are stored in linux

View 5 Replies View Related

General :: Streamed Videos Are Not Getting Stored In /tmp?

Feb 12, 2011

I was using a customized version of ubuntu 10.04 earliervideos which I use to stream were stored in /tmpA week before I switched to 10.10 Now the problem is that the streamed videos are not getting stored in the /tmpsomebody help me with this ... is there any other place where the videos are getting stored.if so, please tell me .... is there any other way by which I can download the videos

View 3 Replies View Related

General :: What Is Stored In /sys/devices/pci0000:00

Mar 26, 2010

Ubuntu 9.04 on a Dell Netbook

While studying where all my (16 GB solid state) disk space is used with Disk Usage Analyzer I found that about a half gigabyte was under sys/devices/pci0000:00/pci0000:00:01.0. In fact it was taken up by two files resource2 and resource2_wc. Both files are dated today.

Can anyone enlighten me to what these subdirectories and files are? My desktop with conventional rotating hard drives do not have any space used under /sys/devices so I am guessing the subdirectories and files are related to the Solid State drive.

View 2 Replies View Related

General :: Where The Last Login Information Is Stored

Feb 26, 2010

If we login in to linux we are getting the following last login information

login as: root
root@192.168.3.16's password:
Last login: Fri Feb 26 16:09:20 2010 from 192.168.3.187
[root@dblinux ~]#

tell me where this information is stored exactly.

View 3 Replies View Related

General :: File Where Login Passwords Is Stored

Jul 4, 2010

Where is the login password stored in Ubuntu? What is that file? Can I open that file?

View 6 Replies View Related

General :: Remove Stored Identities From Ssh-agent?

Mar 15, 2010

I have added an identity to ssh-agent

Code:
ssh-agent /bin/bash
ssh-add ~/.ssh/id_dsa
After restarting the machine. I removed all the identities by

[Code].....

View 3 Replies View Related

General :: Username And Pasword Stored In The Modem?

Apr 27, 2011

I am using Broadband Internet through Auto Ethernet! I forgot the User name and password for the broadband! Is there any Linux command to get the user name and password stored in the modem memory??

View 3 Replies View Related

General :: LVM Partitions Are Equals To OS Partitions?

May 26, 2011

When we install a linux OS, we've an option to create partitions. In my laptop I've create partition for /opt, /home, / and /tmp. Are these partitions the same type of partitions as the partitions created by LVM?

View 1 Replies View Related

General :: IN Which File Error Gets Stored If Installation Of Anything Fails

Jun 3, 2011

I was installing some software on my linux system and then i get long list of errors. Now i can go up and see when did it starts so i want to know the log file where the full error gets stored so that i can look when it started

View 1 Replies View Related

General :: Does The Output Of The Previous Command Get Stored In Any Variable

Mar 26, 2011

For example, when using bash you can use

Code:

to execute the previous command or

Code:

!<number> to execute the Nth command(use history to see the list). Or you can use

Code:

cd !-2:1

to cd into the value in the first field that was executed 2 commands ago Anyhow, say I run a command and the output is a path. Any way to cd and then some variable where OUTPUT of the previous command was stored? A variable that always stores the OUTPUT of the last command.

View 8 Replies View Related

General :: Live CD To Recover Stored Important Scripts?

Feb 21, 2011

My system got crashed yesterday. Before I do any mess up with it I would like to backup some important scripts stored in it. With so many live cds available I am confused which one is to choose. It should not be too big (in terms of mb). Any small Live cd will do.

View 3 Replies View Related

General :: Syslog Allow Organizing Stored Simple Log Files

Sep 15, 2010

Syslog is used to store simple log files or we can manage them too? Well, the thing is, that I need to run a software (like syslog) to collect my logs and put them in order and organize them so it makes them "understandable". I have been told that syslog can do the job and that it doesn't need a complex configuration to work.

View 12 Replies View Related

General :: How To Find Size Of Flash File Not Stored In Temp

Apr 8, 2011

How to find the filesize of a flash which is not exactly stored in the temp but redirected by a fd.
flash31 -> /tmp/FlashXXvsg1uY (deleted) directory is /proc/processid
Chrome is downloading a flash and I can see in the proc directory the flash file, How can I see the current file size of such a file ?

View 1 Replies View Related

General :: Use Bacula To Make Backups Of The Files Stored On The Server?

Apr 14, 2010

I have an ubuntu (8.04.3) server where I use bacula to make backups of the files stored on the server. Ive been trying to find a solution (with no luck) trying to succesfully implement the following:-

A Backup tape for each day of the week besides Thurs which is resused on a weekly basis. For the thursday tapes we have a backup tape corresponding to the week number that the thursday falls so for the first thursday of the month it would be ThursOne For example. These tapes are resued on a monthly basis. We then have a monthly tape that is used on the last thursday of the month. These tapes will be resused on a yearly basis.

Another requirement is just in case a tape is accidently not changed a backup should still occur regardless of what tape is in the drive (so if its tuesday and mondays tape is still in the tape drive it should rewrite that tape).

I did have this successfully set up where the tape was appended after each use rather than being recycled after the nightly backup. But then after a few weeks I would have to manually purge tapes when they became full (which isnt ideal - as Im not always in the office so in my absence it may be that a backup may not take place), so have been playing around and have now got the tapes to be marked as used after a max of 2 jobs (so the backup of the files and the catalog of the night). I also added this line 'Recycle Current Volume = yes' so that it would hopefully recycle the volume in the drive.

However what I am finding is that the tape that should be recycled is not, but in yesterday case the Mondays tape was recycled rather than the Tuesday although Mondays was the last written so Im not even sure why it choose to recycle this tape.

View 1 Replies View Related

General :: Native Monitor Resolution Gone - Where Is The Wrong Info Stored

Mar 2, 2010

On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...

View 2 Replies View Related

General :: What Is The Extension Of Datadbase Files In Clamd Service And Where It Stored

May 10, 2010

Want know the location of the Clamd service database, and also know the extension of these database fies.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved