want get Linux mint8 on to a separate partition but when i go into advance in the partition menu and and chose the partition i want,in this case (e),(c) having windows xp on it.it says ...no root file system is defined.
View 6 RepliesI was hoping you could help me figure something out... I am going to install a new distro onto my laptop and i usually set up partitions for / and /home just in case i have some issues and need to reinstall... i was wondering if there were a way to setup a separate partition where i can put all the programs i wish to install?
View 2 Replies View RelatedI recently downloaded Ubuntu, with Windows Vista dual booting. I am fed up because Ubuntu won't work with my Broadcom BCM4312 Network Connector. I have decided that I am going to install Linux Mint inplace of Ubuntu. The only thing I am worried about is: Will Mint give me the option of which partiton to put it on? I know this sounds stupid, but I am being very cautious about not deleting my files and Vista.
View 12 Replies View Relatedhow to install or how to run Xampp on Linux Mint 7. to start with an extraction is required and this is the error that i am getting while trying to do this:
kelvin-desktop kelvin # tar xvfz xampp-linux1.7.3atar.gz -C /opt
tar: xampp-linux1.7.3atar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
[code]....
Is there a way to move /home to a separate partition?
also, i would like to know if the /home partition can be fat32 or ntfs.
I have a 320gb USB hard drive, one partition for my files, one for playing Wii games, and one which I would like to use for an Ubuntu instillation. To do this, I partitioned my disk accordingly using Windows, then booted from the Ubuntu CD to install the OS to my external hard drive partition. It asked me where I wanted to install the boot loader, so I selected the hard drive itself, rather than the specific partition, reasoning that it would scan the hard drive for a boot record. However, when I booted it (with USB boot selected) it simply said "No Operating System found, replace system disk and press enter" or something similar.
View 3 Replies View RelatedI just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine.Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mixtoo.I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive.
This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it.Here are the options I've considered and why I don't like them:Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all.
Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle.Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless.Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc.
when I was first trying out Linux and installing Partitions, I did it right, but I used 200GB of Space, and so I decided I didn't want to use it VIA Partition and I wanted to use it VIA Wubi... and I didn't know the correct way to uninstall it... So I went to Windows Partition Manager and manually deleted the partition myself with the OS in it, but the thing is, it turned into 200GB of Unallocated space, and I couldn't give it back to my C: so it's just there... and now, a month *Present day* I want to install Mint 10 KDE and now... The big problem... I can't assign Linux Mint 10 to the unallocated space, only to the rest of the HDD... how do I assign it to the "Free" space? I tried "Specify Partitions Manually" but there was nothing that showed up. What would happen if I assigned negative 19% for Linux? Would it cause negative effects?
View 3 Replies View Relatedlast week i installed new mint distribution Helena 8 last day i reinstall my Windows XP , now my linux has gone. how can i recover my boot loader ? btw i tried this comands in Live CD:
sudo apt-get install grub
after this command .. this message appears :
Probing devices to guess BIOS drives. This may take a long time.
I have multiple distros that I chainload and I have installed a grub2 shell to the partition and can boot manual. I can not seem to get a grub.cfg file to work. Is there a directory that needs to be built for this file?
View 9 Replies View RelatedI want to create a separate partition for /home.inuxMint is *already* installed.PartedMagic be used for the same, NOW
View 14 Replies View RelatedI have a DWA-130C (external wireless) and am trying to install the drivers for us in Linux Mint, I'm assuming this is done with ndiswrapper, but I have no idea what I'm doing. I am a begginer to Linux though I know the basics of using the console, packages and such.
View 2 Replies View RelatedI have recently installed linux mint 10 Julia on my wife's Dell. I installed off CD from linux freedom website with the ftp download. My wife wanted her own account so I went to admin/users and groups and created her account. Or so I thought. When I tried to switch users (with the boot CD in and out of the drive) I got the follwing error:
1) "The panel encountered a problem while loading "OAFIID:GNOME_mintMenu" do you want to delete applet from your configuration?"
2) "The panel encountered a problem while loading "OAFIID:GNOME_IndicatorApplet" Do you want to delete the applet from your configuration?" Both of these had an orange word bubble with an exclamation point in it.
3) "Nautilus could not create the following required folders; :/home?tina?Disktop,/home/tina/.nautilus. Before running Nautilus, please create these folders or set permissions such that Nautilus can create them." This came in a red word bubble with an "x" in it. One last thing. When I installed linux mint 10 on my ancient compac (it has a pent 4 processor and had win 2K on it) all I had to do was plug in a usb wireless card and I was online. My wife's Dell has a wireless card built in and I can't find it in mint 10. How do I set up the wireless. Sorry for the "2 fer" but I'm pressed for time and have to get to work. I'm a copier tech/electrician and I'm good with the hardware but with the software, not so much. I'm sticking with linux no matter what the learning curve because my Mom gave me the compac evo thinking it was useless and I've brought it back to life with linux.
I wished to know if I can install windows 7 on my system when I am already running Linux Mint 10(as the only operating system on my machine). That configuration is called a dual boot. If you install Win7 first (or it is already present), THEN install linux, you will find that grub notices both and you will not need to mess with the MBR. The better solution is to load mint, add VirtualBox, and install Win7 into a virtual machine. Then you get to run Linux and Windows AT THE SAME TIME!
View 4 Replies View RelatedI originally had my full hard drive as a full Ubuntu partition but I then re-sized that and installed Windows on a new partition. Now I guess the boot sector got overwritten and I don't have a choice to boot either Windows or Ubuntu. I know I have to reconfigure GRUB or another boot loader to allow the choice but I am not sure of how to go about that.
View 5 Replies View RelatedI got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
View 10 Replies View Relatedone would have to exclude certain folders / directories but would the backup be possible if the system is up and running in its native "live" state ? Which directories could be excluded ? Does swap need to be turned off ? I would like to make incremental backups on a separate partition of the same hard drive. I will endeavour to backup the MBR/ Partition table using dd.
View 6 Replies View RelatedI want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I've seen several tools for partitioning.
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies View RelatedI have an HP laptop with a recently installed copy of Mint 8 KDE Community Edition. I created the initial admin user account ("joseph") when I installed.
I had an existing home directory under a different name from another installation, so I added a user with that name ("joe") and imported a copy of the original home directory. The user "joe" didn't have the same admin privileges as the initial "joseph" account, so I added "joe" to the sudoers file and the same groups as the initial admin user.
Everything works perfectly under this arrangement, for the most part. Now here's the problem:
I have a T-Mobile G1 phone that uses Android. I've rooted and ROM-modded the G1, and have the microSD card in the phone set up with two partitions. The vfat partition stores all the photos, music and other stuff the phone needs. The ROM mod allows me to store apps on the SD card, so that second partition uses ext3 for its file system.
When I'm logged in as the admin "joseph" account and I insert the SD card in the laptop's card slot (or plug the phone into the USB port), the SD card can be mounted, and I have full access to both card partitions. I can see all folders. I do this to backup the contents of the card to an external drive (especially the apps in the ext3 partition, since that's been trashed on me once before on the phone).
However, when I log in as "joe", I cannot view the contents of the ext3 partition at all. I can see the vfat drive fine, and the ext3 partition mounts, but with user/group "joseph/joseph." When I open Dolphin to view the mounted ext3 partition, I get the error "could not enter folder /media/disk-1" at the bottom of the view window in Dolphin.
Here are the relative entries returned when I run "mount" to view the mounted drives:
/dev/mmcblk0p1 on /media/disk type vfat (rw,nosuid,nodev,uhelper=hal,uid=1001,utf8,shortname=mixed,flush)
/dev/mmcblk0p2 on /media/disk-1 type ext3 (rw,nosuid,nodev,uhelper=hal)
Note that the uid listed on the vfat mount is 1001, which is the gid for the "joe" account.
I know there must be a configuration setting somewhere that will allow the ext3 partition to automount under the "joe" user account. I suppose that using the admin account to change the permissions would be the easy way to do this, but there must be something that would do it automagically. I've ripped through all the config files I can find, but can't seem to find anything that would help.
All I'm looking for here is enough access to be able to copy the directories on that mount to my external drive.
I was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP
5GB Linux Mint 8
5GB Ubuntu 9.10 NBR (awesome distro by the way!)
130GB Home partition shared by Linux Mint and Ubuntu NBR
2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
i recently dual booted my laptop with linux mint, i used the mint4win installer and works great, but when i did it on a friends computer it gets almost all the way through the installation then a message comes up can not download the metalink and therefore the iso.
View 2 Replies View RelatedI have installed my server running centos 5.6 on single LVM partiton
scheme is luke this:
/boot - ext3
Volume Group
- System LV - /
- Swap LV - swap
how can i separate devide root partition on several partition for separate directories like
Volume Group
- System - /
- Home - /home
- Var - /var
- Swap - swap
Is there any chance to do this ? also is there are basic recomendations for server partition sizes ? i will have mail server and virtual host there in /home vmail and vhost is it ok: 10gb - /; 20gb - /var; 200gb - /home ?
of course after doing separate LVM partitions i can expand them in future, but what are basics ?
I keep my /home on a separate partition. After every clean install of Ubuntu my old panel configuration is loaded. Meaning, shortcuts on my panel and different applets I've put on my panels as well.
what file in the /home folder is keeping these settings? Simply, I'd like to delete so I can have that "fresh" install feeling on my desktop.
is their a boot partiton that need to be kept seperate in ubuntu? Screenshot.png those are my partitons in the pic above am i okay to merge them all into the dev/sda2 or is it like windows and i need to keep a small section back for the boot?
View 5 Replies View RelatedI have installed various distros/releases of linux over the past few days and have read of a few people keeping separate partitions for their /home folders. I have a few questions:
1) I assume /home is installed with the OS and would always be on the OS partition.
2) Can I repartition the drive even though I am already installed to allocate space or would I have to start from scratch, create the partitions, and reinstall the OS?
3) How much space would one need for a home folder? Majority of hdd right?
Okay I want to install Ubuntu Studio but sense the file is 1.7 gigs can I somehowbut half on or a 1/3 on disk the next part on another and so on. If so how?
View 1 Replies View RelatedHow can I Install Mint 10 KDE if I have Ubuntu 10.04? My intention is to change to Mint 10 KDE. Main concern is to keep my personal documents safe while doing the change
View 1 Replies View RelatedI run several OSes (all Linux) on my computer. I set a separate partition for each one. I want to run Fedora 13 LXDE mainly for a game or two that are in the Fedora repos but not in any others, so I will not need a lot of space. But I want to make sure there is enough room for the OS.
I want to be able to play CloneKeen, so I will need enough space for that. I may find some other games, as well, so I will need some extra space. I have my other two OSes on six GB apiece, and Peppermint actaully uses barely half of that. Will 6GB be enough for a basic Fedora install with a few games installed? I will not really use Fedora for anything else, probably.
P4 2.4gHZ 2.0GB Ram I have tried to do some reading on this by googling and such, but it is all a bit overwhelming and so many posts/articles want to deal with dual booting which I am not planning to do on this machine. I am trying to find some info on whether it is better to have a separate boot partition. As in, separate from root partition. I have read that a separate boot partition makes for a quicker start and better recovery if system crashes. I will shortly be installing openSuse 11.2(KDE) [currently on 11.0] and I want to optimise the partition scheme so that it is the most efficient. I have a 160GB HDD that will be housing this new installation, so space is not a problem. I am only user on this machine. Currently, it is just partitioned as such:
2.0GB - swap [because I read it should equal Ram]
32.0GB - /
40.0GB - /home
76.8GB - extra storage [Not really necessary as I have 2 other HDD on system 1 - 320GB and 1 - 200GB]
Also, is it recommended to have separate partitions for /tmp /var or any other /nnn ?