i installed Ubuntu 9.10 on an external hard-drive according to an online guide i found. The first problem i ran into was that Grub takes ages to load, however, after it's loaded, i am able to choose what OS to start(i have windows vista of my computers hard-drive). The second problem is that i am now unable to start windows vista without having my external hard drive (the one that Ubuntu is installed on) connected to my PC, it just says something like "Loading grub....no such disk". Im really worried that i've done something irriversible.
In my first article that is posted at 29.10.2010 "Installing Ubuntu 10.10 on a Windows 7 System (Dual booting) with Radeon X300/X550/X1050 SERIES Graphics Card". I got most of email in that most of the people are asked me to give step by step Installation method for Windows 7 and Ubuntu 10.10 in dual booting. So am trying to give you to installation method for both Operating Systems. I hope it will help to you for easy installation for Windows 7 and Ubuntu 10.10 in Dual booting method.
I have installed Windows 7 and Ubuntu 10.10 on HP dx 7200 micro towers. System Information :- Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7201)
Im planning on installing a beta of my favorite distro to /dev/hdb from a mounted iso on an /dev/hda partition.Im not exactly a newbie, but i cant say i have ever done this before. Anyone aware of any issues i might encounter? Is lilo ok booting from one drive to another? Is it ok to just install lilo on the mbr of /dev/hda to boot a distro on /dev/hdb?
I have an old linux partition (fedora 10) that used to start from the MBR. Now I've installed windows 7 on a new drive (overwritning the MBR, autostarting windows). Is there a neat program availible that somehow enables me to choose to boot back into linux?
I'm writing this post from the BT5 Live CD. However, after install and reaching a CLI (on the HDD), when I run startx, my monitor simply displays 'invalid format' (obviously this works fine via the LiveCD)... I've installed Ubuntu and Fedora a few times on a few machines, and have never had any issues with the display... not sure where to start troubleshooting.
i installed squid 2.6 proxy server on centos 5.4,squid performs services very nice but after reboot the system.it shows a just black screen written with " GRUB_ " and held the boot process,tell me what should i do ?
just like most Linux distributions, will happily co-exist on a hard disk with just about any version of Windows. This is a concept known as dual-booting. Essentially, when you power up your PC you will be presented with a menu which provides the option to boot either Ubuntu Linux or Windows. Obviously you can only run one operating system at a time, but it is worth noting that the files on the Windows partition of your disk drive will be available to you from Ubuntu Linux regardless of whether your windows partition was formatted using NTFS. To day I have installed Latest Windows 7 and Latest Ubuntu 10.10 on my office system (Dual booting). This two operating system which I installed in HP dx 7200 micro towers.
System Information Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7201) (7201.winmain_win7ids.090601-1516) Language: English (Regional Setting: English) System Manufacturer: Hewlett-Packard System Model: HP Compaq dx7200 Microtower BIOS: Default System BIOS
I just downloaded Ubuntu no problem, and put it on a DVD just fine. I have 2 HDD in my computer, a 1.5TB (main drive, in slot SATA 0) and an 80GB (back up, in SATA 1). I intended on installing Ubuntu on the 80GB drive, and it seemed I did so just fine; I got to the end of the process perfectly. However, when I restart my computer to boot it up it just gives me a black screen with a white flashing underscore in the top left hand corner, kinda like a DOS screen. I also tried booting up from my 1.5TB drive, but another black screen said that it didn't exist, along with throwing me a code, which leads me to believe that I deleted my Win7 partition by mistake.
Boot Info Script 0.55 dated February 15th, 2010============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub. sda1: __________________________________________________ _______________________
I'm stuck with a problem trying to boot an Ubuntu Desktop 10.10 x64 CD into a white Macbook (2.1 gen, Core2Duo ) I've installed rEFIt, and synchronized GPT with MBR - all ok.
But when I insert the cd (works ok, the same CD on a DELL laptop ) and boot it via rEFIt, the computer hangs with this console message
Code: 1. 2. Boot from Ubuntu CD-ROM:_ And I can't go further... anyone knows ?
I just installed Ubuntu 10.04 as 2nd OS in My HDD, Ubuntu & WinXP is showing in Grub Boot Loader. Ubuntu is working fine but Windows XP is not booting from boot loader.
I tried to do edit grub.cfg & menu.1st file but problem not solved.
My partition, grub version & grub.cfg details r as below -
i want to restore grub after installing xp my ubuntu version is 9.10 i had used this find /boot/grub/stage1 . with the previous versions but it didn't work with 9.10 what can i do ??
I got this laptop today and decided to dual boot Linux, as I've been using it for a bit on an older laptop. I downloaded and installed Ubunutu 10.04, using the first install option to have it install next to Windows, and afterwards on startup I get 6 options: Whenever I try to boot with either of the Windows options, it goes to the Windows loading bar, then the screen goes black and the computer resets. I didn't make recovery disks. I already had Vista recovery disks and I did try that, but it said I wouldn't be able to restore the system with them. F11 on startup splashscreen does nothing.
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
I have a dell inspireon 1501 and everytime I try to install a version of ubuntu above 9.10 I get colored stipes on the screen. How do I fix this. The dell laptop has a ati Xpress1150 card in it. It came in the laptop stock.
What is the "recommended" method for dual-booting Ubuntu and Windows 7, if one cannot allow the disk's MBR to be overwritten or changed in any way?
Before now, I have either installed GRUB/GRUB2 to the MBR, or else installed Ubuntu and Windows to two different hard drives.
The machine in this case, a Samsung NP300-V5A-A02US notebook PC, has only a single hard drive. I cannot allow any alteration of the MBR, because then the Samsung backup/system recovery software (Samsung Recovery Solution 5) will no longer work.
Ubuntu Lucid 10.04 Beta 2 64-bit Dual-boot with Windows 7 Professional 64-bit Compaq CQ50-215NR laptop with 3GB system memory, 1.9GHz Athlon X2 QL-60 dual-core processor, nVIDIA GeForce 8200M G, 160GB HDD
Today I decided to install the BURG bootmenu on my computer so that I could enjoy nice, pretty graphical bootmenus instead of boring old text-based ones.I installed and configured BURG using this tutorial(after some few snafus wherein I tried to use older tutorials and went through many needless complicated steps that didn't end up working anyway).Restarted, and it worked great - except for one thing. Windows would no longer boot.It would get to the "Starting Windows" screen, then about halfway through there it would flash and restart.It wouldn't start in "Startup Repair Mode" either (the same thing happened). So, I did some frantic googling, and discovered this thread. I followed a set of instructions posted therein to install Lilo, reconfigure my MBR to Windows' liking, and reinstall Grub2.Windows booted after that.Well, I thought that the problem must have been caused by one of the numerous false starts I made while trying to get BURG installed, so I installed BURG again, set it up again, and bang - Windows wouldn't boot any more.So, I re-did the MBR with Lilo again, only this time I forgot to reinstall Grub2 (oops!) and had to boot from my LiveCD and install it thataway.At any rate, I'm fairly certain that installing BURG is what's keeping Windows from booting.
i currently am running windos 7 (64 bit) and would also like to install ubuntu on a second hard drive. i understand a dual boot is easy enough to do, but i'd like to install ubuntu so that it and windows are completely isolated. rather than be prompted with a boot screen to choose os, i would do so by changing hd boot priority in bios. i'd like the end result to be 2 separte computers in one box. can it be set up this way, and if so, how?
I am using a linux kernel 2.6.36 using mips architecture. I have succesfully booted the machine through Flash memory, but it is not booting through nfs. It is getting stuck at the stage where the image starts loading. In short the vmlinux.img file is being copied properly to nfsroot but the image is not loading.
I have a WinXP computer with two internal hard drives that are partitioned. I would like to setup a dualbooting system. I first attempted to install PC-BSD 8.0 from a DVD onto an external 640 GB USB hard drive. Everything looked it was going to work (including the boot loader program) until after the installation. PC-BSD took out the NTFS of the hard drive (with over 500 GB of Window files). And the bootloader never loaded on startup. It took two days to get everything back. The files created on this external hard drive could not be read by another linux operating system (Slax 6.1.1). I would like to load PC-BSD on one of my empty partitions (from my second hard drive). The manual for PC-BSD states PC-BSD has to be installed on a primary drive and not a logical drive. If you attempt a logical drive installation, PC-BSD will wipe out the entire hard drive on installation. Would it help if I format a logical partition to the linux file system and then attempt to install PC-BSD to it? I can use Slax 6.1.1 from a CD to format the logical partition.
So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
I had setup my system for triple boot with Windows, F10 & Suse. I had the Windows partition and then installed F10 setting up Grub to load the other two. All went fine and was able to choose to boot to Windows which worked. I then installed Suse, choosing the bootloader to be on the partition for Suse. This installed fine and can now choose to boot into Suse which works. F10 still works as expected, but when I choose to boot Windows, I just end up with a Grub command line. I can't see how the Windows partition could have been affected. I can still see all the files in there, but it just wont boot.
[Code]...
This is not really a Linux issue but does anyone know how I can 'repair' this Windows partition without affecting any other partitions. I don't have a Windows install CD. If I boot off FreeDOS, is there a command to repair the 'bootability' of the Windows partition only?
So, it's 2010 and I already though I got rid of coding my own drivers & compiling my own kernel in normal use... After installing latest Fedora 14 updates, my system won't boot anymore into fedora. Just continuous loop no matter if I select previous kernel system won't boot.
Anyone any ideas? I think it might be ATI driver but not 100% sure since I didn't see any D/A related or Kernel updates wasn't upcoming...
Anyways I will figure out this sooner or later but this kind of updates sucks a bit that your system goes suddenly totally unuseable or system won't reboot, sooo , time to move on with an another distro or is Fedora just RedHat's playaground?
After I installed the driver for my AGP GeForce Fx 5500, the system is not booting. I followed some instructions on a website and I disabled "nouveau" in the grub.conf file and then I installed the driver for the VGA. I need to mention that I updated my system to the latest software updates. Anyway, after I installed the driver (which it seems it was wrong for my VGA), the system currently arrive to a step in booting which it's : Starting apt [ok]. After that the system is hanging and not able to enter the desktop.
I recently switched my primary desktop over from Windows 7 to Fedora 14. I successfully installed the OS on to my hard drive and booted up, following which I installed all of the updates and rebooted. After my first reboot I downloaded the 10.11 Radeon driver and installed it (because the 10.12 was having an md5 hash issue), the install was (supposedly) successful, but when I restarted my computer it first progresses to this screen (copied from softpedia) and then goes black for a second, and then returns to that screen and halts at the end of the progess bar and does nothing. I am looking for help to get back into my system.
Just did a clean install of 11.3. After first try, system couldn't boot for hard drive. When installing a second time, I noticed that booting from a boot partition and the MBR are disabled by default. I enabled both and proceeded with the install. System now boots fine. Since the automatic partitioning created a boot partition, I'm assuming that that is where the system is booting from and I didn't need to enable booting from MBR, but am not 100% sure. So make sure to at least enable booting from a boot partition
Perty self explanitory, I'm trying to boot up ubunto server edition 10.10 from a USB stick (pen drive) and it works fine until step 3 when it says "Your installation CD-ROM couldn't be mounted. This probably means that the CD-ROM was not put in the drive. If so you can insert it and try again
Try again to mount the CD-ROM? <Yes> <No>"
I don't have an installation cd-rom! I put the .iso file onto a memory stick, inserted it into my old computer (which i will turn into a server later) , restarted it and got past the first two slides and got this error? Do I have to put the iso on a cd-rom?
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version. I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I've been searching the forums for any posts that cover my problem, but most of the booting problems I've found are different from mine.Anywho, the situation:ell laptop, 2 partitions, first is Windows XP, second is Ubuntu Karmic.Whenever I turn on my computer the first loading screen that shows up (is this the BIOS? Excuse my little knowledge of this stuff), before GRUB loads, is really slow. It takes about a minute to load.However, whenever I restart from my XP partition, it suddenly loads fast! And this does not happen when restarting from my Ubuntu partition or anything
