Fedora Installation :: After Installing Graphics Drivers Computer Not Booting Into 14
Jan 22, 2011
I recently switched my primary desktop over from Windows 7 to Fedora 14. I successfully installed the OS on to my hard drive and booted up, following which I installed all of the updates and rebooted. After my first reboot I downloaded the 10.11 Radeon driver and installed it (because the 10.12 was having an md5 hash issue), the install was (supposedly) successful, but when I restarted my computer it first progresses to this screen (copied from softpedia) and then goes black for a second, and then returns to that screen and halts at the end of the progess bar and does nothing. I am looking for help to get back into my system.
I installed fedora 11 yesterday, and didn't get time to do anything else. And the first thing I did today was to install the nVidia graphics drivers. But after I rebooted the loadings screen comes up (the one with 3 loading bars) and then it's just a black screen with a blinking _
im having an intel E2180 processor with 2 gb RAM and an nvidia 8400gs graphics card. Lately i installed Fedora 12 on my system and found that with default settings the desktop 3d is not working. so installed the kmod-nvidia using yum after following the instruction.i also edited the grub.conf file to rdblacklist=nouveau to blacklist nouveau drivers.
Then once i rebooted i found two kernels in grub ie the old one and the one with PAE extension. when i booted into the old kernel its Xwindows failed to load showing a black screen and when i tried the new PAE kernel it booted in 640 x 480 resolution. {earlier i was getting a resolution of 1440 x 900 on my 17" widescreen monitor}. it also showed that the nvidia drivers failed to load. I also read in some forums that the PAE kernels are for systems with 4gb+ of ram. So i thought it better to reinstall the whole thing. then i reinstalled the whole operating system using my fedora 12 dvd and performed the 'upgrade or replace the existing linux distribution'. interestingly now my older kernel has disappeared and the PAE kernel is the one that is remaining.
I am totally new to Ubuntu but have been tinkering for a week now. Can't say I have figured a thing out, thank God for Google, Linux is just not for the novice user. I guess thats where Windows comes in but I really like the stability of Linux and the fact it is Open Source and free. Wish I was a cool programmer or someone who has worked with the OS for a while, that would make things a lot easier. Where can I study up and get a little more educated about what I am doing? Anyway hopefully someone can answer the driver question. Lastly is there anyway to get Hardware Acceleration if using an Intel i5 system?
Before we start, I wanted to say I noticed the "Ubuntu cannot fix or improve these drivers." Please read anyways.
I've tried to activate the "ATI/AMD Proprietary FGLRX graphics driver" from the System>Administration>Additional drivers and it has an error halfway through the process.
I use an ATI/AMD Radeon HD 5770 in my computer (if that helps), and Ubuntu is on my USB(8GB).
The error message I receive (after awhile of waiting) is :
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
I am trying to run Fedora on a Soekris 5501. To do this I have written F10 to an 8GB compact flash disk using Fedora Live USB Creator, with one 2GB partition for the OS and a 6GB partition for storage. I get the following error when attempting to boot:
I've installed Fedora 12 64bit, but the computer crashes while booting, basically after the irqbalance or rpcbind steps.
Here are photos of the error messages:
Here are my hardware specs: MB: Biostar TF560 A2+ CPU: AMD Athlon 64 X2 Dual Core 5000+ RAM: DDR2 800 Dual 128 bit, 2T (4GB) GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS and the problem persists.
Note that I've tried Ubuntu (32bit and 64bit) and it also crashes about 30 seconds after loading the graphical interface (either installer or login screen). Fedora's graphical installer worked flawlessly, tho. I've also tried SLAX (using it right now) and it works without any problems.
I have a WinXP computer with two internal hard drives that are partitioned. I would like to setup a dualbooting system. I first attempted to install PC-BSD 8.0 from a DVD onto an external 640 GB USB hard drive. Everything looked it was going to work (including the boot loader program) until after the installation. PC-BSD took out the NTFS of the hard drive (with over 500 GB of Window files). And the bootloader never loaded on startup. It took two days to get everything back. The files created on this external hard drive could not be read by another linux operating system (Slax 6.1.1). I would like to load PC-BSD on one of my empty partitions (from my second hard drive). The manual for PC-BSD states PC-BSD has to be installed on a primary drive and not a logical drive. If you attempt a logical drive installation, PC-BSD will wipe out the entire hard drive on installation. Would it help if I format a logical partition to the linux file system and then attempt to install PC-BSD to it? I can use Slax 6.1.1 from a CD to format the logical partition.
I had setup my system for triple boot with Windows, F10 & Suse. I had the Windows partition and then installed F10 setting up Grub to load the other two. All went fine and was able to choose to boot to Windows which worked. I then installed Suse, choosing the bootloader to be on the partition for Suse. This installed fine and can now choose to boot into Suse which works. F10 still works as expected, but when I choose to boot Windows, I just end up with a Grub command line. I can't see how the Windows partition could have been affected. I can still see all the files in there, but it just wont boot.
[Code]...
This is not really a Linux issue but does anyone know how I can 'repair' this Windows partition without affecting any other partitions. I don't have a Windows install CD. If I boot off FreeDOS, is there a command to repair the 'bootability' of the Windows partition only?
I'm new to these forums. I'm coming from using Ubuntu for a couple of years and now I'm trying to switch to Fedora.
I installed F10 yesterday and all went well, more or less. The system used to freeze randomly but after updating, everything seemed to work fine (I haven't tried audio yet, though).
I have an X1250 integrated graphics system that's working fine in Ubuntu. After playing around with F10 for a while I decided to download and install the latest ATI drivers from AMD's site. The installation posed no problems, but when I reboot the system it will come to a black screen at some point and freeze there.
I searched the web a little and came to this: http://www.fedorafaq.org/#radeon, but I'm not sure if that's current or old news. If it's current and those ATI drivers can't be installed, I'd appreciate some help about removing them.
After searching online and in these forums I found two different ways of installing the Nvidia drivers in fedora 12. If you haven't yet installed the the repos then:
Code: su rpm -Uvh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm First way: as su (1) yum --enablerepo=rp*g install kmod-nvidia.$(uname -m) xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64
[Code]...
I used the first way and everything seems to work fine. Compiz-fusion works good but i did have to add vga=795 to /boot/grub/grub.conf to get the graphical boot loader to work again. Should I have used the second method? What is the difference in these two ways? Most notably the second steps. Is one way better or preferred over the other? From my understanding you must do this because of the nouveau driver.
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
I upgraded to ubuntu a few days ago and it didn't install properly but i managed to fix all the package errors. However the graphics drivers aren't working and i tried to fix it in recovery mode but its not helping at all. ubuntu is just starting up so it looks like a terminal.
I have intel GMA 4500M graphic card. In synaptic package manager I found out that there are a bunch of installed packages for nvidia and ATI. I was wondering if I can delete this files since i have INTEL graphic card. Any recommendations for uninstalling unneeded files?
How to install this Nvidia Geforce 8800 driver. I've been told that the installation files I got will do everything - it doesn't. I've been told about some kind of xorg.conf file that doesn't exist- xorg.conf-vesa does though, I assume that's vesa drivers and theres something else for other drivers.
My workplace is conducting a pilot of fedora15 for adoption as our SOE desktop. We've installed on 3 desktops and two laptops, and are experiencing an intermittent lock-up on each platform. In all cases so far over our two week trial, whilst users are performing routine work on the gnome desktop (e.g. email, web browsing, etc), the screen will freeze, and the mouse/keyboard appear to be inoperable, so it is impossible to go to a virtual desktop, etc. Only a hard reboot brings the PC back, and there are no logs, core dumps, etc.
We've been trying to eliminate sources, and have seen the fault on the following combinations:
* AMD/Intel * A variety of graphics hardware (e.g. nvidia, intel 945) * nvidia drivers (various versions), and nouveau * Gnome 3 in normal and fallback mode * rpms from the initial F15 release, and also after a full yum update (last week).
We have not been able to correlate the lock-up with particular usage patterns or system load. Sometimes, the desktop will be usable for a day or more, and other times, we may see three lockups in an hour.
There is a bug on this matter:
[URL]
I am raising the matter here to see, because I am puzzled as to why we are experiencing it on all platforms, and yet it does not seem to be so prevalent in the wider community.
I have been searching for ages for graphics drivers for my ATI Mobility Radeon HD 4650 graphics card. I have several software that need hardware accelerated 3D. I found several threads that deal with this issue, but none of them seems to help. I tried the following:
[code]...
I rebooted after each one and I still cannot get any hardware accelerated 3D; it is as if I installed nothing.
Yesterday I updated my computer from 9.10 to 10.04. When I restarted my computer it appeared this message: Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this. (EE) No devices detected.
After that, it comes a window with the question "What would you like to do?" and 5 options... Run UBUNTU in low-graphics mode. Reconfigure graphics. Troubleshoot the error. Exit to console login. Restart X
I'm going now with the first option, because I used to reconfigure graphics but my computer freezes with no aparent reason in the login window. I have a HP Pavilion 7956.
As this question pops up quite often on IRC and, as a quick search told me, on this board as well, I decided to put together some directions that, with some or the other variation, also apply to other Linux distributions and have never failed me. The following is confirmed to work for Kubuntu 11.04 Natty Narwhal 64bit with a NVIDIA GeForce GT 240 and on Kubuntu 11.04 Natty Narwhal 32bit with a NVIDIA GeForce FX 5900XT graphics card.
This HowTo will describe how to install the proprietary NVIDIA graphics card drivers using exclusively the command line. I strongly suggest you try this method for a fresh install of graphics drivers before trying any other method, especially a GUI-driven one (I never used a GUI for package management on a Debian-ish system, but I hear that the Ubuntu Software Center supposedly has a way of installing proprietary graphics drivers).
The restricted packages repository should be enabled by default. To the more experienced users: This HowTo uses apt-get for demonstrating the install process. If you prefer using aptitude, feel free to replace the commands accordingly. First steps. As well be doing everything on the command line, first open a terminal application from your desktop environments menu or from a shortcut icon on your panel, if you have one. You should be greeted by a prompt that looks like this:
I want to install a new graphics card, Nvidia Geforce 9400 GT, into my system running Fedora 12, x86_64.
* Should I install the hardware into the system first? * Or should I download the proper drivers and install them first, before hardware? * Do I need to disable or remove drivers for my integrated graphics card (Integrated NVIDIA GeForce 6150 SE graphics) before I do anything?
Sometimes, in Firefox, after looking a video and closing the corresponding tab, a still picture of the video appears in other tabs, even in some other applications than Firefox (e.g. Terminal). I've installed the nvidia drivers on Fedora 14. They seem to work properly.
having major trouble installing Debian.erased the data on one of the partitons that used to hold Vector Linux and tried to install Debian on but it failed for some reason.Since I'm dead tired (well, was) I thought I would call it a night and just wait until tomorrow to finish the installation.So, I rebooted my computer and all it would do is this:
It would just do two or three rows of 99's and then it would hang. Does anyone know what is happening? Right now I have Windows on this computer and I can't even boot into that. The data for Windows is safe but I just can't boot into Windows for some reason.n erasing sda6, did I accidentally erase LILO too (Vector was the first option on LILO)?If someone has posted this problem in the past
I have an old dell laptop that I want to put ubuntu on but it doesn't have a cd drive, I can't boot from a network, and the bios doesn't support a usbdrive. It does have a floppy drive and I wanted to know if there is a bootfloppy that allows me to boot from a usb?
I had originally followed the advice at Mauriat Miranda's Fedora Nvidia Driver Install Guide [URL] for installing nvidia's display driver on my HP Pavilion system 64 bit running Fedora 11. I had used his first method which just installs the relevant kernel module kmod-nvidia from RPMFusion. He also suggested an alternate method: obtaining Nvidia's installer NVIDIA-Linux-x86_64-185.18.36-pkg2.run and using that. I downloaded it from Nvidia, but I didn't run it.
I recently lost X. This had happened previously after a kernel upgrade, and I just used grub to boot an earlier kernel to recover X, and then installed the upgraded kernel module to fix the problem. But this time, being deeply involved in something else, I panicked slightly, and, using dumb terminal mode I ran the Nvidia installer. It asked me to make various choices and in response to my answers, it decided to compile a new kernel module. This recovered X, but I then compounded things by installing the updated kmod-nvidia.
I realized afterwards that using both methods might create some conflicts, but X seemed to run properly. (I can tell because graphics in the program Maple doesn't work properly with the default drivers provided by Fedora 11.) Since then, when I restart nvidia, I get.
how to enable the Gnome Shell with an AMD 6950 graphics card and the default Fedora 15 drivers? I may try the AMD Catalyst proprietary drivers but from history those usually lag behind the Fedora versions. I also read some people had issues with the current AMD Catalyst drivers in the Catalyst guide thread.
Also, the AMD 6950 graphics card fan is at full speed all the time in Fedora 15. I do believe you can with the Catalyst drivers using aticonfig but was wondering about the default Fedora 15 drivers?
