General :: Xubuntu 9.10 Fresh Install - USB Automount Failure
Jan 24, 2010
Code:
allen@heavy:/etc$ uname -a
Linux heavy 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
FAT: IO charset ISO-8859-1 not found
I just recently installed Xubuntu 9.10 on my old acer Aspire 3000. Previously I was running Debian 5. Something it was great and all but I wanted to try out the "New Hotness" that is Xubuntu. The install went flawless and as far as Linux distro's go this is by far the most impressive. However, I have this problem with my USB storage devices not mounting. When I plug them in they show up and everything looks like its about to work when I get this: [URL]
A quick jaunt over to dmesg:
Code:
#
[ 2950.184072] usb 1-3: new high speed USB device using ehci_hcd and address 6
#
[ 2950.320178] usb 1-3: configuration #1 chosen from 1 choice
#
[ 2950.326192] scsi5 : SCSI emulation for USB Mass Storage devices
#
[ 2950.326513] usb-storage: device found at 6
#
[ 2950.326519] usb-storage: waiting for device to settle before scanning
#
[ 2955.324403] usb-storage: device scan complete .....
I've been all over google, in multiple irc rooms asking questions, and I cant seem to get anywhere. I can mount the devices manually with mount -t auto /dev/sdb1 /mountpoint. They mount themselves when I plug them in.
View 4 Replies
ADVERTISEMENT
Nov 28, 2010
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
View 1 Replies
View Related
May 10, 2011
I've just installed 'Testing' on a VMware server and after I completed the install with no problems, the system booted into the kernel and I noticed the following start up process error:
Code:
startpar: service(s) returned failure: udev...failure!!!
I have not seen this before and am not sure if it's related to the fact that this is a virtual machine and not a physical server or something else. Here is a Screenshot.
View 1 Replies
View Related
May 10, 2011
I've just installed 'Testing' on a VMware server and after I completed the install with no problems, the system booted into the kernel and I noticed the following start up process error:
startpar: service(s) returned failure: udev...failure!
I have not seen this before and am not sure if it's related to the fact that this is a virtual machine and not a physical server or something else.
Here is a Screenshot.
View 1 Replies
View Related
Oct 16, 2010
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
View 2 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
May 8, 2011
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
[Code]...
View 5 Replies
View Related
Aug 29, 2010
Situation is that NEITHER Linux Mint 9 NOR Ubuntu Maverick will automount my usb or cdrom? I circumvented by manual mounts thru fstab of my usb stick and usb hard drive. Now I go to burn an iso and find that my cdrom is not detected.
mount /dev/sr0 /media/cdrom0 does not do the trick, I cannot burn.
What in the world could I have done to my system ? I think blkid is ok. Win7 burns the iso to cd just fine. All OS on same CPU (grub2). I have done some searches but with minimal success.
View 5 Replies
View Related
Jan 14, 2009
I am unable ot mount a USB external drive on fedora 6, and automount hasn't worked since the last upgrade from 5.
View 1 Replies
View Related
Apr 23, 2011
i tried to install xubuntu on my desktop using wubi..it instaled and everything when i tired to boot xubuntu it said
Code:
Gave up waiting for root device. Common Problems:
-Check rootdelay=(did the system wait long enough?)
-Check root=(did the system wait for the right device?)
-Missing Modules (cat /proc/modules; ls /dev
ALERT! /dev/sdb3 does not exist. Dropping to a shell!
okay now when i try to boot window$ vi$ta and re Install WUBI window$ cant boot either
View 1 Replies
View Related
Jul 22, 2010
I am trying to install Xubuntu (lucid) via the ALTERNATE CD... Everything goes smoothly until the Installer tries to install Software... There it presents me with something like: "There was a problem installing software. You can abort or choose to retry installation by choosing off the menu"
View 1 Replies
View Related
Jan 12, 2010
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
View 5 Replies
View Related
Nov 17, 2010
I have experienced a failure in one disk in my 4 disk software RAID10setup, but a straightforward rebuild is thwarted by the fact that twoof the other disks are considered non-fresh and hence get kicked outof the array. This of course prevents the array from starting up.Here's more detail about my setup:I have 4 2TB SATA disks in RAID10.
Device Boot Start End Blocks Id System
/dev/sda1 1 243201 1953512001 fd Linux raid autodetect
/dev/sdc1 1 243201 1953512001 fd Linux raid autodetect
[code]....
View 1 Replies
View Related
Nov 17, 2010
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies
View Related
Jan 12, 2011
I'm try to install XUbuntu 10.10 (AMD64) on a Pc, when I set the language, and press Enter on "Try XUbuntu without installing", appears the Xubuntu logos and remain fixed for many hours without giving error... same problem with Ubuntu and Kubuntu.
I try to set acpi=off and noapic but i don't resolved the problem..
View 1 Replies
View Related
Apr 25, 2010
Having problems installing Xubuntu 9.04 to my Dell Latitude CPi (old, I know, but available...). Problem is that the CDROM is not working right and the BIOS doesn't support boot from USB so I can't do a complete live CD install via the CDROM or USB.What I'd like to do instead is install the ISO to the HD and run the install from that HD. Even with the CDROM problems I am able to load the Live CD installer from CDROM.
With that I think the best option will be to extract the ISO files to the HD (attach to another computer and extract to a FAT32 partition, then replace HD back in the latitude) then direct the liveCD bootloader to find the install files on the HD. Unfortunately I don't know the necessary commands to pass to the bootloader.
View 5 Replies
View Related
Dec 6, 2010
I remembered the last time I use wubi, I can install Xubuntu from local ISO image.
and today, when trying to install Xubuntu, wubi trying to download Xubuntu ISO. there is no option to choose local ISO image.
I've tried to put Xubuntu ISO in the same folder as wubi installer, and close internet connection... both not works...
I use unstable wireless internet. It rather impossible to download until finish big size Xubuntu ISO from internet
View 1 Replies
View Related
Dec 5, 2010
I am trying to install Linux on a 12-year-old PC with an AMD Pentium II equivalent and with 128Mb RAM. Xubuntu 10.04 won't install because the kernel requires "cmov" but the PC's processor doesn't have it. There are loads of posts on the Internet about this but I have not found any listings of Linux distros that don't need cmov other than TinyMe, which I shall try installing.
There is no hope of my being able to use the command line to replace the kernel version or for any such fix -I am just too new to it all. nice-looking distro that should install that doesn't look too old and that has a good set of features?
View 14 Replies
View Related
Aug 2, 2010
How do I install SDL (and other libraries) onto my dual-boot (XP/Xubuntu) computer? With only what came on the Xubuntu disk, I am able to play Oolite at what seems to be 1000 FPS, and Torcs at about 70 FPS.
View 6 Replies
View Related
Oct 6, 2010
I am trying to install Android development plugin to Eclipse, but it has a problem with version (i think). I installed my eclipse using yum.
Now, I want to try uninstalling eclipse and use the version from the eclipse.org website instead to avoid this problem. I run rpm and got the folllowing mesg.
Code:
How do I uninstall all the eclipse component and re-install it fresh?
View 1 Replies
View Related
Mar 14, 2010
i normally use live cd's/dvd's. well i really liked black panther but, my problem is that it's in Hungary and that it did not give me any information on what the user and password is to log in for the first time.
View 2 Replies
View Related
Feb 25, 2010
Pretty soon, I hope, I'll get my brand new PC and wish to install a Linux disto. on it. openSuse may be it But I read recently that people prefer to do a fresh install of a newer version of openSuse, instead of upgrading it, apparently because of problems that may occur by the upgrade. As I understand, this preference apply to all Linux distributions and not only openSuse. Thus I wonder if there's a Linux distro. that's best in handling upgrades?I don't want to make a fresh new install each and every time that my disro. has a new version. I'm afraid to lose the data in that installation, and backing-up the data would be a headache. Also I plan to install a Windows OS alongside the Linux one via the Dual Boot configuration.
View 14 Replies
View Related
Apr 16, 2011
I have tried many times to load Debian on a new HD without any success. I used bittorrent to download it to my windows vista laptop and preceded to burn the image to a cd using Active@isoburner. But it only gets to where it says boot failure.
AMD 64X2 3800 CPU
1.5 G RAM
ASUS A8N5X MOTHERBOARD
ATI RADEON HD 545O GRAPHICS
HITACHI DESKSTAR SATA 500G HD
View 4 Replies
View Related
May 19, 2010
I have a computer with redhat installed that once it boots up it comes to an application login screen. I want to bypass that and get root access to reformat hard drive and install latest version of Debian Linux.
View 1 Replies
View Related
Sep 25, 2010
I was trying to install Fedora to dual boot with Vista in the middle it said that the installation failed and now it will not run grub to let me choose between Windows and Mint which I had installed. All that happens is it shows a command line and says "grub rescue>"
View 1 Replies
View Related
Oct 1, 2010
I am trying to install several of the packages listed in the repositories for Ubuntu 10.04 LTS from the Ubuntu SoftwarecCenter. I get the error message: "The action would require the installation of packages from not authenticated sources."
How can this be...they are in the repository. Doesn't that mean they are authenticated?
By the way, under sources, I selected "Server for the United States".
What can I do to fix this?
View 1 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Jun 30, 2011
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
View 4 Replies
View Related
Oct 30, 2010
Got an old SUSE box from a friend, installed 11.3, got a few items: 1. didn't see any prompts to enter monitor info during install, control center shows as generic. Read about 'sax2' (hope that's right) but can't find it on my system or in the add-ons image. Do I need to hack monitor.conf? how? 2. installation aborted when trying to load 'textlive'.3. going into control center->mouse, the display quivers a little then I get kicked back out to the login prompt. 4. how to get kaffeine to process flv files? 5. how to get a flash drive to automount when I plug it in? I can manually mount ok. I guess that's about all for now.
View 2 Replies
View Related
Jul 24, 2011
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
View 4 Replies
View Related
